VAUXHALL Astravan Mk4 (G) (T98) 2.0 DTI Clutch plate (100 hp Diesel Y 20 DTH)
Recommended part replacement interval for your car for the part category Clutch plate: every 100.000 km
-
- Vehicle Identification Number (VIN) from: 3H000001
-
- Vehicle Identification Number (VIN) from: 4G000001
-
- Vehicle Identification Number (VIN) from: 3B000001
-
- Vehicle Identification Number (VIN) from: 38000001
-
- Vehicle Identification Number (VIN) from: 36000001
-
- Vehicle Identification Number (VIN) from: 35000001
-
- Vehicle Identification Number (VIN) from: 32000001
- Diameter [mm]: 228
- Number of Teeth: 14
- Technical Information Number: USF
- Item number: 323 0586 10
- Our price: 123,60 €
- Manufacturer: LuK
- EAN number: 4005108236364
- Condition: New
-
- Vehicle Identification Number (VIN) to: 2H999999
- Engine Code: Y20DTH
-
- Vehicle Identification Number (VIN) to: 2G999999
-
- Vehicle Identification Number (VIN) to: 28999999
-
- Vehicle Identification Number (VIN) to: 26999999
-
- Vehicle Identification Number (VIN) to: 25999999
-
- Vehicle Identification Number (VIN) to: 22999999
- Diameter [mm]: 228
- Number of Teeth: 14
- Technical Information Number: TDFV
- Item number: 323 0598 10
- Our price: 162,54 €
- Manufacturer: LuK
- EAN number: 4005108236043
- Condition: New
price incl. 19% VAT
- Parameter: 228C
- Diameter [mm]: 228
- Hub Profile: 22x25-14N
- Number of Teeth: 14
- Clutch Type: rigid sintered disc
- Product line: Performance
- Item number: 881864 001770
- Our price: 337,20 €
- Manufacturer: SACHS PERFORMANCE
- EAN number: 4050451007888
- Condition: New
A reinforced clutch cover has fundamental advantages against Performance clutch disc differences to OE: higher Rigid, sintered disk an OE clutch cover, such as a higher transmittable torque transmittable torque, higher burst number of revolutions, and higher resistance against thrust. It also allows for start performance similar to OE, effortless exchange with OE clutches. faster and sportier gearshifts. That makes it extremely Typical applications include: application field of dual mass useful for street tuning, endurance races, hill climbing (group N) and for vehicles that are often driven with their flywheels, chip tuning, turbocharger and supercharger maximum gross vehicle weight (construction-site vehicles, modifications, towing trailers, commercial vehicle, ambulances, courier services such as UPS, TNT; DHL, etc.). snowremoval vehicle, passenger car: emergency service, Both rigid and torsion damper clutch discs are available. driving school, taxi, vehicles with maximum gross vehicle Clutch discs with torsion springs function as a vibration weight and according to high load (construction-site damper between engine and gearbox. vehicles, towing service, campers, ambulance cars, etc.), 1/4 mile-race, race circuit (endurance race, clubsport, Due to reinforced clutch components the pedal force can autocross), hill climbing (e.g. group N), rally, slalom, increase and the modulation range can be reduced. Additional clutch and gear noises can appear. drift racing
price incl. 19% VAT
- Diameter [mm]: 280
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 25
- Fitting Position: Front Axle
- Height [mm]: 42
- Surface: Oiled
- Centering Diameter [mm]: 70
- Number of Holes: 5
- Minimum thickness [mm]: 22
- Test Mark: E1 90R-02C0957 / 2551
- Drilled: no
- Item number: BG3405
- Manufacturer: DELPHI
- EAN number: 5012759086506
- Condition: New
- Diameter [mm]: 264
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 10
- Fitting Position: Rear Axle
- Height [mm]: 42
- Surface: Oiled
- Centering Diameter [mm]: 65,5
- Number of Holes: 5
- Minimum thickness [mm]: 8
- Test Mark: E4 90R-02C0747 / 2816
- Drilled: no
- Item number: BG3406
- Manufacturer: DELPHI
- EAN number: 5012759086513
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle
- Braking / Drive Dynamics: for vehicles without ABS
- Diameter [mm]: 256
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 11
- Height [mm]: 41,5
- Centering Diameter [mm]: 60
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 8
- Drilled: no
- Item number: BDC4812
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593604865
- Condition: New
-
- Fitting Position: Rear Axle
- Braking / Drive Dynamics: for vehicles without ABS
- Diameter [mm]: 240
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 10
- Height [mm]: 43
- Centering Diameter [mm]: 57
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 8
- Drilled: no
- Item number: BDC4815
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593604896
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Quantity Unit: Axle Set
- Brake System: Lucas / TRW
- Wear Warning Contact: with acoustic wear warning
- Thickness [mm]: 15,3
- Fitting Position: Rear Axle
- Supplementary Article / Supplementary Info: with accessories
- Height [mm]: 42,8
- Width [mm]: 95,3
- Test Mark: E1 90R-02A0333 / 0253, E9 90R-02A1163 / 1231
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- MAPP code available
- Number of bolts / screws: 4
- Item number: 13.0460-2868.2
- Our price: 33,98 €
- Manufacturer: ATE
- EAN number: 4006633104135
- Condition: New
- Quantity Unit: Axle Set
- Brake System: Bosch
- Wear Warning Contact: with acoustic wear warning
- Thickness [mm]: 16,5
- Fitting Position: Rear Axle
- Supplementary Article / Supplementary Info: with accessories
- Height [mm]: 42,7
- Width [mm]: 104,6
- Test Mark: E1 90R-01326 / 452
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- MAPP code available
- Number of bolts / screws: 2
- Item number: 13.0460-3976.2
- Our price: 31,36 €
- Manufacturer: ATE
- EAN number: 4006633057660
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Quantity Unit: Axle Set
- Brake System: Lucas / TRW
- Wear Warning Contact: with acoustic wear warning
- Thickness [mm]: 15,3
- Product line: Ceramic
- Fitting Position: Rear Axle
- Supplementary Article / Supplementary Info: with accessories
- Height [mm]: 42,8
- Width [mm]: 95,3
- Test Mark: E1 90R-02A0258 / 0226
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- MAPP code available
- Number of bolts / screws: 4
- Permissible up to vehicle capacity [kW]: 225
- Item number: 13.0470-2868.2
- Our price: 47,32 €
- Manufacturer: ATE
- EAN number: 4006633346429
- Condition: New
Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.
- Quantity Unit: Axle Set
- Brake System: ATE
- Wear Warning Contact: without integrated wear warning contact, with acoustic wear warning
- Product line: Ceramic
- Fitting Position: Front Axle
- Height 1 [mm]: 71,4
- Height 2 [mm]: 78,5
- Width 2 [mm]: 156,3
- Width 1 [mm]: 155,1
- Thickness 1 [mm]: 20,2
- Thickness 2 [mm]: 19,6
- Test Mark: E1 90R-011403 / 1338
- MAPP code available
- Article number of recommended accessories: 24.8190-0718.2
- Observe dimensions
- Permissible up to vehicle capacity [kW]: 225
- Item number: 13.0470-7116.2
- Our price: 47,94 €
- Manufacturer: ATE
- EAN number: 4006633346832
- Condition: New
Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.
price incl. 19% VAT
excl. delivery costs
-
- Rim Hole Number: 5
- Fitting Position: Front Axle
- Diameter [mm]: 280,0
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 24,8
- Height [mm]: 42
- Surface: Coated
- Centering Diameter [mm]: 70,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 110,0
- Minimum thickness [mm]: 22,0
- Inner Diameter [mm]: 139,0
- Machining: Alloyed / High-carbon
- MAPP code available
- No. of holes 2: 7
- Test Mark: E1 90R-02C0115 / 0415
- Bore Diameter [mm]: 14,0
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0125-0131.1
- Manufacturer: ATE
- EAN number: 4006633033244
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 240
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 10
- Fitting Position: Rear Axle
- Height [mm]: 42
- Surface: Oiled
- Centering Diameter [mm]: 57
- Number of Holes: 4
- Minimum thickness [mm]: 8
- Test Mark: E1 90R-02C0967 / 2594
- Drilled: no
- Item number: BG3403
- Manufacturer: DELPHI
- EAN number: 5012759086483
- Condition: New
- Diameter [mm]: 280
- Brake Disc Type: Vented
- Construction Year to: 05 / 2005
- Supplementary Info: ORIGINAL Quality
- Brake Disc Thickness [mm]: 24,8
- Fitting Position: Front Axle
- Height [mm]: 42
- Centering Diameter [mm]: 70
- Number of Holes: 5
- Wheel Bolt Bore Diameter [mm]: 14,2
- Bolt Hole Circle Ø [mm]: 110
- Minimum thickness [mm]: 22
- Required quantity: 2
- Drilled: no
- Item number: 615 521 6017
- Manufacturer: MEYLE
- EAN number: 4040074331767
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle
- Braking / Drive Dynamics: for vehicles without ABS
- Diameter [mm]: 256
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 24
- Height [mm]: 41
- Centering Diameter [mm]: 60
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 21
- Drilled: no
- Item number: BDC4813
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593604872
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle
- Braking / Drive Dynamics: for vehicles with ABS
- Diameter [mm]: 280
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 25
- Height [mm]: 42
- Centering Diameter [mm]: 70
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 110
- Minimum thickness [mm]: 22
- Drilled: no
- Item number: BDC4814
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593604889
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Rear Axle
- Braking / Drive Dynamics: for vehicles with ABS
- Diameter [mm]: 264
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 10
- Height [mm]: 43
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 8
- Drilled: no
- Item number: BDC4816
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593604902
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Quantity Unit: Axle Set
- Brake System: ATE
- Wear Warning Contact: without integrated wear warning contact, with acoustic wear warning
- Fitting Position: Front Axle
- Height 1 [mm]: 71,4
- Height 2 [mm]: 78,5
- Width 2 [mm]: 156,3
- Width 1 [mm]: 155,1
- Thickness 1 [mm]: 20,2
- Thickness 2 [mm]: 19,6
- Test Mark: E1 90R-01795 / 608
- MAPP code available
- Article number of recommended accessories: 24.8190-0718.2
- Observe dimensions
- Item number: 13.0460-7116.2
- Our price: 36,73 €
- Manufacturer: ATE
- EAN number: 4006633069540
- Condition: New
-
- Rim Hole Number: 5
- Fitting Position: Rear Axle
- Diameter [mm]: 264,0
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 9,8
- Height [mm]: 42
- Surface: Coated
- Centering Diameter [mm]: 65,5
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 110,0
- Minimum thickness [mm]: 8,0
- Inner Diameter [mm]: 145,0
- MAPP code available
- Test Mark: E1 90R-02C0165 / 0694
- Bore Diameter [mm]: 14,0
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0110-0250.1
- Manufacturer: ATE
- EAN number: 4006633029681
- Condition: New
-
- Rim Hole Number: 5
- Fitting Position: Front Axle
- Diameter [mm]: 280,0
- Brake Disc Type: Vented
- Product line: PowerDisc
- Brake Disc Thickness [mm]: 24,8
- Height [mm]: 42
- Surface: Coated
- Centering Diameter [mm]: 70,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 110,0
- Minimum thickness [mm]: 22,0
- Inner Diameter [mm]: 139,0
- Machining: Alloyed / High-carbon
- MAPP code available
- No. of holes 2: 7
- Test Mark: E1 90R-02C0858 / 1213
- Bore Diameter [mm]: 14,0
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0325-0131.1
- Manufacturer: ATE
- EAN number: 4006633094436
- Condition: New
For vehicles without ABS, a PowerDisc can be used on the rea r axle only if there is one on the front axle. The General Operating Permit (ABE) for the PowerDisc applies to operation on German roads in accordance with the German Road Traffic Registration Ordinance (StVZO). Other countries may require additional type approvals for use on roads.
price incl. 19% VAT
excl. delivery costs