VAUXHALL Astra Mk6 (J) GTC (P10) 1.6 Clutch plate (180 hp Petrol A 16 LET)
Recommended part replacement interval for your car for the part category Clutch plate: every 100.000 km
- Diameter [mm]: 215
- Number of Teeth: 20
- Weight [kg]: 1,000
- Observe service information
- Item number: ADW193125
- Our price: 109,51 €
- Manufacturer: BLUE PRINT
- EAN number: 5057746162047
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Transmission Type: 6-Speed Manual Transmission
- Parameter: 215HTD
- Diameter [mm]: 215
- Hub Profile: 20,1x22,6-20N
- Number of Teeth: 20
- Item number: 1878 003 309
- Our price: 92,26 €
- Manufacturer: SACHS
- EAN number: 4013872553266
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 215
- Number of Teeth: 20
- Technical Information Number: TDFA
- Item number: 322 0370 10
- Our price: 162,88 €
- Manufacturer: LuK
- EAN number: 4005108498410
- Condition: New
price incl. 19% VAT
- Parameter: 215
- Diameter [mm]: 215
- Hub Profile: 20,1x22,6-20N
- Number of Teeth: 20
- Clutch Type: Rigid clutch disc with organic surfaces
- Item number: 881864 001683
- Our price: 269,86 €
- Manufacturer: SACHS PERFORMANCE
- EAN number: 4050451003934
- Condition: New
Performance clutch disc differences to OE: higher Rigid disk with organic linings transmittable torque, higher burst number of revolutions, start performance similar to OE, effortless exchange with OE clutches. Typical applications include: application field of dual mass flywheels, chip tuning, turbocharger and supercharger modifications, towing trailers, commercial vehicle, snowremoval vehicle, passenger car: emergency service, driving school, taxi, vehicles with maximum gross vehicle weight and according to high load (construction-site vehicles, towing service, campers, ambulance cars, etc.), 1/4 mile-race, race circuit (endurance race, clubsport, autocross), hill climbing (e.g. group N), rally, slalom, drift racing
price incl. 19% VAT
-
- Fitting Position: Front Axle
- for brake disc diameter [mm]: 300
- for RPO code: J60
- Quantity Unit: Axle Set
- Wear Warning Contact: with acoustic wear warning
- Supplementary Article / Supplementary Info: with accessories
- Height 1 [mm]: 61,3
- Height 2 [mm]: 61,3
- Width 2 [mm]: 148
- Width 1 [mm]: 148
- Thickness 1 [mm]: 18
- Thickness 2 [mm]: 18
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate
- Net weight [kg]: 2,15
- Item number: 223646
- Our price: 75,64 €
- Manufacturer: NK
- EAN number: 5703858856045
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Rear Axle
- for brake disc diameter [mm]: 292
- for RPO code: J60
- Quantity Unit: Axle Set
- Wear Warning Contact: with acoustic wear warning
- Supplementary Article / Supplementary Info: with accessories
- Height 1 [mm]: 44,1
- Height 2 [mm]: 42,8
- Width 2 [mm]: 116,6
- Width 1 [mm]: 116,6
- Thickness 1 [mm]: 16,2
- Thickness 2 [mm]: 16,2
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate
- Net weight [kg]: 1,14
- Item number: 223647
- Our price: 56,91 €
- Manufacturer: NK
- EAN number: 5703858856052
- Condition: New
price incl. 19% VAT
- Quantity Unit: Axle Set
- Brake System: MANDO
- Wear Warning Contact: with acoustic wear warning
- Thickness [mm]: 18,8
- Fitting Position: Front Axle
- Height [mm]: 66,7
- Width [mm]: 142
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate
- for brake disc diameter [mm]: 321
- Item number: 6859
- Our price: 41,22 €
- Manufacturer: MAPCO
- EAN number: 4043605455642
- Condition: New
-
- Fitting Position: Front Axle
- Rim Size [inch]: 16
- Diameter [mm]: 276
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 26
- Height [mm]: 45,5
- Centering Diameter [mm]: 60
- Number of Holes: 5
- Minimum thickness [mm]: 23
- Test Mark: E1 90R-02C0373 / 0050
- Drilled: no
- Item number: BG4191
- Manufacturer: DELPHI
- EAN number: 5012759439494
- Condition: New
price incl. 19% VAT
-
- Construction Year to: 10 / 2015
- Fitting Position: Front Axle
- for brake disc diameter [mm]: 276
- Quantity Unit: Axle Set
- Thickness [mm]: 18,8
- Number of wear indicators [per axle]: 2
- Height [mm]: 60,3
- Width [mm]: 148
- Item number: 05P1581
- Our price: 27,47 €
- Manufacturer: LPR
- EAN number: 8032928096836
- Condition: New
-
- Construction Year to: 10 / 2015
- Fitting Position: Front Axle
- Rim Size [inch]: 15.0
- Diameter [mm]: 276
- Brake Disc Type: internally vented
- Brake Disc Thickness [mm]: 26
- Height [mm]: 45,5
- Centering Diameter [mm]: 60
- Number of Holes: 5
- Drilled: no
- Item number: O1035V
- Manufacturer: LPR
- EAN number: 8032928099288
- Condition: New
price incl. 19% VAT
-
- Fitting Position: Rear Axle
- for brake disc diameter [mm]: 292
- Supplementary Article / Supplementary Info: without accessories
-
- Fitting Position: Rear Axle
- for brake disc diameter [mm]: 268
- Supplementary Article / Supplementary Info: without accessories
- Quantity Unit: Axle Set
- Wear Warning Contact: with acoustic wear warning
- Thickness [mm]: 15,8
- Material: Low-Metallic
- Height [mm]: 42,6
- Width [mm]: 116,5
- WVA Number: 25096
- Test Mark: ECE-R90
- Supplementary Article / Supplementary Info Info 2: with mounting manual
- Article number of recommended accessories: 1987474747
- Observe technical data
- Item number: 0 986 494 435
- Our price: 30,55 €
- Manufacturer: BOSCH
- EAN number: 4047024821590
- Condition: New
- Diameter [mm]: 276
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 26
- Fitting Position: Front Axle
- Height [mm]: 45,5
- Surface: Oiled
- Centering Diameter [mm]: 60
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 105
- Minimum thickness [mm]: 23
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 14,3
- Drilled: no
- Item number: 0 986 479 643
- Manufacturer: BOSCH
- EAN number: 4047024749184
- Condition: New
- Diameter [mm]: 268
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 12
- Fitting Position: Rear Axle
- Height [mm]: 45
- Surface: Oiled
- Centering Diameter [mm]: 60
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 105
- Minimum thickness [mm]: 10
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 14
- Drilled: no
- Item number: 0 986 479 645
- Manufacturer: BOSCH
- EAN number: 4047024749207
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 292
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 12
- Fitting Position: Rear Axle
- Height [mm]: 45
- Surface: Oiled
- Centering Diameter [mm]: 70,7
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 115
- Minimum thickness [mm]: 10
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 14
- Drilled: no
- Item number: 0 986 479 646
- Manufacturer: BOSCH
- EAN number: 4047024749344
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Quantity Unit: Axle Set
- Brake System: BOSCH
- Wear Warning Contact: incl. wear warning contact
- Supplementary Info: Q+, original equipment manufacturer quality
- Thickness [mm]: 16,5
- Fitting Position: Rear Axle
- Height 1 [mm]: 42,7
- Height [mm]: 42,6
- Weight [kg]: 1,175
- Packaging width [cm]: 9
- Packaging height [cm]: 9
- Packaging Depth [cm]: 12,7
- Item number: V40-0682
- Our price: 26,28 €
- Manufacturer: VAICO
- EAN number: 4046001470677
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Diameter [mm]: 300
- Brake Disc Type: internally vented
- Brake Disc Thickness [mm]: 26
- Fitting Position: Front Axle
- Height [mm]: 45,5
- Surface: Coated
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 115
- Minimum thickness [mm]: 23
- Inner Diameter [mm]: 149
- Hub Diameter [mm]: 70,7
- No. of holes 1: 1
- Observe technical data
- Drilled: no
- Item number: J3300902
- Manufacturer: HERTH+BUSS JAKOPARTS
- EAN number: 4029416277291
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Rear Axle
- for model code: 17",18" Wheels
- Diameter [mm]: 292
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 12
- Height [mm]: 45
- Surface: Oiled
- Centering Diameter [mm]: 70,7
- Number of Holes: 5
- Minimum thickness [mm]: 10
- Test Mark: E1 90R-02C0967 / 2532
- Drilled: no
- Item number: BG4279
- Manufacturer: DELPHI
- EAN number: 5012759450611
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year to: 10 / 2015
- Fitting Position: Front Axle
- Rim Size [inch]: 16.0
- Diameter [mm]: 300
- Brake Disc Type: internally vented
- Brake Disc Thickness [mm]: 26
- Height [mm]: 45,5
- Centering Diameter [mm]: 70,7
- Number of Holes: 5
- Minimum thickness [mm]: 23
- Drilled: no
- Item number: O1036V
- Manufacturer: LPR
- EAN number: 8032928099295
- Condition: New
price incl. 19% VAT
- Diameter [mm]: 300
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 26
- Fitting Position: Front Axle
- Height [mm]: 45,5
- Surface: Oiled
- Centering Diameter [mm]: 70,7
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 115
- Minimum thickness [mm]: 23
- Machining: High-carbon
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 14,2
- Drilled: no
- Item number: 0 986 479 644
- Manufacturer: BOSCH
- EAN number: 4047024749191
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- for POC: J67
- Brake System: 15"
- Diameter [mm]: 268
- Brake Disc Type: solid
- Supplementary Info: Original VAICO Quality
- Brake Disc Thickness [mm]: 12
- Fitting Position: Rear Axle
- Height [mm]: 45
- Rim Hole Number: 5
- Hub Diameter 1 [mm]: 60
- Minimum thickness [mm]: 10
- Weight [kg]: 5,15
- fulfils ECE norm: R90
- Drilled: no
- Item number: V40-40019
- Manufacturer: VAICO
- EAN number: 4046001552083
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.