Porsche 997 Convertible 3.6 Carrera Clutch plate (345 hp Petrol MA1.02)
Recommended part replacement interval for your car for the part category Clutch plate: every 100.000 km
- Transmission Type: 6-Speed Manual Transmission
- Number of Teeth: 23
- Hub Profile: 23,3x26,3-23N
- Parameter: 240C
- Diameter [mm]: 240
- Clutch Type: rigid sintered disc
- Product line: Performance
- Item number: 881864 000916
- Our price: 302,00 €
- Manufacturer: SACHS PERFORMANCE
- EAN number: 4050451004962
- Condition: New
A reinforced clutch cover has fundamental advantages against Performance clutch disc differences to OE: higher Rigid, sintered disk an OE clutch cover, such as a higher transmittable torque transmittable torque, higher burst number of revolutions, and higher resistance against thrust. It also allows for start performance similar to OE, effortless exchange with OE clutches. faster and sportier gearshifts. That makes it extremely Typical applications include: application field of dual mass useful for street tuning, endurance races, hill climbing (group N) and for vehicles that are often driven with their flywheels, chip tuning, turbocharger and supercharger maximum gross vehicle weight (construction-site vehicles, modifications, towing trailers, commercial vehicle, ambulances, courier services such as UPS, TNT; DHL, etc.). snowremoval vehicle, passenger car: emergency service, Both rigid and torsion damper clutch discs are available. driving school, taxi, vehicles with maximum gross vehicle Clutch discs with torsion springs function as a vibration weight and according to high load (construction-site damper between engine and gearbox. vehicles, towing service, campers, ambulance cars, etc.), 1/4 mile-race, race circuit (endurance race, clubsport, Due to reinforced clutch components the pedal force can autocross), hill climbing (e.g. group N), rally, slalom, increase and the modulation range can be reduced. Additional clutch and gear noises can appear. drift racing
price incl. 19% VAT
- Transmission Type: 6-Speed Manual Transmission
- Number of Teeth: 23
- Hub Profile: 23,3x26,3-23N
- Parameter: 240B
- Diameter [mm]: 240
- Clutch Type: Rigid clutch disc with organic surfaces
- Product line: Performance
- Item number: 881864 999957
- Our price: 309,00 €
- Manufacturer: SACHS PERFORMANCE
- EAN number: 881864999957
- Condition: New
A reinforced clutch cover has fundamental advantages against Performance clutch disc differences to OE: higher Rigid disk with organic linings an OE clutch cover, such as a higher transmittable torque transmittable torque, higher burst number of revolutions, and higher resistance against thrust. It also allows for start performance similar to OE, effortless exchange with OE clutches. faster and sportier gearshifts. That makes it extremely Typical applications include: application field of dual mass useful for street tuning, endurance races, hill climbing (group N) and for vehicles that are often driven with their flywheels, chip tuning, turbocharger and supercharger maximum gross vehicle weight (construction-site vehicles, modifications, towing trailers, commercial vehicle, ambulances, courier services such as UPS, TNT; DHL, etc.). snowremoval vehicle, passenger car: emergency service, Both rigid and torsion damper clutch discs are available. driving school, taxi, vehicles with maximum gross vehicle Clutch discs with torsion springs function as a vibration weight and according to high load (construction-site damper between engine and gearbox. vehicles, towing service, campers, ambulance cars, etc.), 1/4 mile-race, race circuit (endurance race, clubsport, Due to reinforced clutch components the pedal force can autocross), hill climbing (e.g. group N), rally, slalom, increase and the modulation range can be reduced. Additional clutch and gear noises can appear. drift racing
price incl. 19% VAT
- Transmission Type: 6-Speed Manual Transmission
- Number of Teeth: 23
- Hub Profile: 23,3x26,3-23N
- Parameter: 240B
- Diameter [mm]: 240
- Clutch Type: Rigid clutch disc with organic surfaces
- Item number: 881864 003095
- Our price: 560,50 €
- Manufacturer: SACHS PERFORMANCE
- EAN number: 221024120309721203097
- Condition: New
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- Fitting Position: Rear Axle Left
- Paired product: 0 986 479 582
- Diameter [mm]: 329,7
- Brake Disc Type: Perforated, Vented
- Drilled: yes
- Surface: Coated
- Machining: Alloyed / High-carbon
- Braking System: not for carbon-ceramic brake discs
- Brake Disc Thickness [mm]: 28
- Height [mm]: 74,9
- Centering Diameter [mm]: 98
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 130
- Minimum thickness [mm]: 26
- Bore Diameter up to [mm]: 15,4
- Item number: 0 986 479 581
- Manufacturer: BOSCH
- EAN number: 4047024683730
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle Right
- Paired product: 24.0128-0197.1
- Diameter [mm]: 330,0
- Brake Disc Type: perforated / vented
- Drilled: yes
- Surface: Coated
- Machining: Alloyed / High-carbon
- Braking System: for vehicles without ceramic brakes
- Brake Disc Thickness [mm]: 28,0
- Height [mm]: 75,0
- Centering Diameter [mm]: 98,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 130,0
- Minimum thickness [mm]: 26,0
- Inner Diameter [mm]: 180,0
- MAPP code available
- Test Mark: E1 90R-02C0640 / 1203
- Bore Diameter [mm]: 15,4
- Item number: 24.0128-0196.1
- Manufacturer: ATE
- EAN number: 4006633302074
- Condition: New
price incl. 19% VAT
- Fitting Position: Rear Axle Left
- Paired product: 24.0128-0196.1
- Diameter [mm]: 330,0
- Brake Disc Type: perforated / vented
- Drilled: yes
- Surface: Coated
- Machining: Alloyed / High-carbon
- Braking System: for vehicles without ceramic brakes
- Brake Disc Thickness [mm]: 28,0
- Height [mm]: 75,0
- Centering Diameter [mm]: 98,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 130,0
- Minimum thickness [mm]: 26,0
- Inner Diameter [mm]: 180,0
- MAPP code available
- Test Mark: E1 90R-02C0640 / 1203
- Bore Diameter [mm]: 15,4
- Item number: 24.0128-0197.1
- Manufacturer: ATE
- EAN number: 4006633302135
- Condition: New
price incl. 19% VAT
- Fitting Position: Rear Axle
- Brake System: Brembo
- Wear Warning Contact: prepared for wear warning indicator
- Supplementary Article / Supplementary Info: without accessories
- Thickness [mm]: 16,7
- Product line: PREMIER ECO FRICTION
- Quantity Unit: Axle Set
- Width [mm]: 130,6
- WVA Number: 24154
- Test Mark: R90 Homologated
- Weight [kg]: 1,809
- Braking System: not for carbon-ceramic brake discs, only in conjunction with steel brake discs
- Article number of recommended accessories: FWI383
- Quantity per axle: 1, 4
- Packing Type: Box
- Packaging length [cm]: 15,8
- Packaging width [cm]: 9
- Packaging height [cm]: 8,8
- Item number: FDB4211
- Our price: 133,99 €
- Manufacturer: FERODO
- EAN number: 4044197480838
- Condition: New
price incl. 19% VAT
- Fitting Position: Rear Axle
- Brake System: Brembo
- Wear Warning Contact: prepared for wear warning indicator
- Supplementary Article / Supplementary Info: without accessories
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate
- Thickness [mm]: 18
- Product line: Prime
- Quantity Unit: Axle Set
- Height [mm]: 76
- Width [mm]: 131
- WVA Number: 24454
- Item number: P 65 013
- Our price: 86,49 €
- Manufacturer: BREMBO
- EAN number: 8020584061848
- Condition: New
- Fitting Position: Rear Axle Left
- Paired product: 460.1563.20
- Diameter [mm]: 330
- Brake Disc Type: internally vented, Perforated
- Drilled: yes
- Surface: Coated
- Braking System: for vehicles without ceramic brakes
- Product line: COAT Z
- Brake Disc Thickness [mm]: 28
- Height [mm]: 75
- Centering Diameter [mm]: 98
- Rim Hole Number: 5
- Hole Arrangement / Number: 10 / 5
- Bolt Hole Circle Ø [mm]: 130
- Minimum thickness [mm]: 26
- Weight [kg]: 9,1
- Test Mark: ECE R90 APPROVED
- Item number: 460.1562.20
- Manufacturer: ZIMMERMANN
- EAN number: 4250238719731
- Condition: New
price incl. 19% VAT
- Fitting Position: Rear Axle Right
- Paired product: 460.1562.20
- Diameter [mm]: 330
- Brake Disc Type: internally vented, Perforated
- Drilled: yes
- Surface: Coated
- Braking System: for vehicles without ceramic brakes
- Product line: COAT Z
- Brake Disc Thickness [mm]: 28
- Height [mm]: 75
- Centering Diameter [mm]: 98
- Rim Hole Number: 2
- Hole Arrangement / Number: 10 / 5
- Bolt Hole Circle Ø [mm]: 130
- Minimum thickness [mm]: 26
- Weight [kg]: 9,1
- Test Mark: ECE R90 APPROVED
- Item number: 460.1563.20
- Manufacturer: ZIMMERMANN
- EAN number: 4250238719748
- Condition: New
price incl. 19% VAT
- Fitting Position: Rear Axle
- Wear Warning Contact: prepared for wear warning indicator
- Braking System: not for carbon-ceramic brake discs, only in conjunction with steel brake discs
- Thickness [mm]: 16,8
- Quantity Unit: Axle Set
- Height [mm]: 86,1
- Width [mm]: 121,2
- Test Mark: E990R-01120 / 554ExtI
- Manufacturer Restriction: BREMBO
- Item number: GDB1758
- Our price: 54,49 €
- Manufacturer: TRW
- EAN number: 3322937806690
- Condition: New
- Fitting Position: Front Axle Left
- Paired product: 24.0128-0246.1
- Diameter [mm]: 330,0
- Brake Disc Type: perforated / vented
- Drilled: yes
- Surface: Coated
- Machining: Alloyed / High-carbon
- Braking System: for vehicles without ceramic brakes
- Brake Disc Thickness [mm]: 28,0
- Height [mm]: 69,0
- Centering Diameter [mm]: 98,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 130,0
- Minimum thickness [mm]: 26,0
- Inner Diameter [mm]: 159,7
- MAPP code available
- Test Mark: E1 90R-02C0640 / 1203
- Bore Diameter [mm]: 15,4
- Item number: 24.0128-0247.1
- Manufacturer: ATE
- EAN number: 4006633370561
- Condition: New
price incl. 19% VAT
- Fitting Position: Front Axle
- Brake System: Brembo
- Wear Warning Contact: prepared for wear warning indicator
- Supplementary Article / Supplementary Info: without accessories
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate
- not for country specific design: USA, Canada
- Thickness [mm]: 19
- Product line: Prime
- Quantity Unit: Axle Set
- Height [mm]: 74
- Width [mm]: 200
- WVA Number: 24459
- Braking System: not for carbon-ceramic brake discs
- Item number: P 65 018
- Our price: 95,49 €
- Manufacturer: BREMBO
- EAN number: 8020584090787
- Condition: New
- Fitting Position: Front Axle
- Brake System: Brembo
- Construction Year from: 09 / 2008
- Wear Warning Contact: prepared for wear warning indicator
- Supplementary Article / Supplementary Info: without accessories
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate
- Quantity Unit: Axle Set
- Height 1 [mm]: 90,3
- Height 2 [mm]: 90,3
- Width 2 [mm]: 125,1
- Width 1 [mm]: 125,1
- Thickness 1 [mm]: 17
- Thickness 2 [mm]: 17
- WVA Number: 23329
- Test Mark: E9 90R-02A0841 / 1054
- FMSI Code: D917-7798
- Friction Lining Material: Low-Metallic
- Item number: LP1996
- Our price: 30,99 €
- Manufacturer: DELPHI
- EAN number: 5012759406410
- Condition: New
4 identical pads
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Wear Warning Contact: prepared for wear warning indicator
- Quantity Unit: Axle Set
- Length [mm]: 140
- Width [mm]: 89
- Thickness 1 [mm]: 17
- Test Mark: ECE R90 Approved
- Braking System: for vehicles without ceramic brakes
- Observe service information
- Item number: 16752
- Our price: 38,49 €
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816167525
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Brake System: Brembo
- Wear Warning Contact: prepared for wear warning indicator
- Supplementary Article / Supplementary Info: with accessories
- Supplementary Article / Supplementary Info Info 2: with adhesive film
- Thickness [mm]: 16,8
- Quantity Unit: Axle Set
- Length [mm]: 121,3
- Height [mm]: 90,5
- Weight [kg]: 2,5
- Item number: 0982.00
- Our price: 41,99 €
- Manufacturer: REMSA
- EAN number: 8427975022790
- Condition: New
- Fitting Position: Front Axle
- Wear Warning Contact: prepared for wear warning indicator, without integrated wear sensor
- Supplementary Article / Supplementary Info: with accessories
- Supplementary Article / Supplementary Info Info 2: with adhesive film
- Thickness [mm]: 17,5
- Quantity Unit: Axle Set
- Length [mm]: 199,3
- Height [mm]: 73,9
- Item number: 1366.00
- Our price: 46,99 €
- Manufacturer: REMSA
- EAN number: 8427975030825
- Condition: New
- Fitting Position: Front Axle
- Wear Warning Contact: prepared for wear warning indicator
- Supplementary Article / Supplementary Info: with counterweights
- Thickness [mm]: 17
- Quantity Unit: Axle Set
- Height [mm]: 90,1
- Width [mm]: 121
- Test Mark: E9 90R - 01120 / 555
- Manufacturer Restriction: BREMBO
- Braking System: not for carbon-ceramic brake discs, only in conjunction with steel brake discs
- Item number: GDB1742
- Our price: 50,99 €
- Manufacturer: TRW
- EAN number: 3322937752638
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Wear Warning Contact: prepared for wear warning indicator
- Thickness [mm]: 16,6
- Quantity Unit: Axle Set
- Height [mm]: 75,5
- Width [mm]: 130,5
- Test Mark: E9 90R - 01120 / 2534
- Manufacturer Restriction: BREMBO
- Braking System: not for carbon-ceramic brake discs
- Item number: GDB1792
- Our price: 49,99 €
- Manufacturer: TRW
- EAN number: 3322937942022
- Condition: New
- Fitting Position: Front Axle Right
- Paired product: 24.0128-0247.1
- Diameter [mm]: 330,0
- Brake Disc Type: perforated / vented
- Drilled: yes
- Surface: Coated
- Machining: Alloyed / High-carbon
- Braking System: for vehicles without ceramic brakes
- Brake Disc Thickness [mm]: 28,0
- Height [mm]: 69,0
- Centering Diameter [mm]: 98,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 130,0
- Minimum thickness [mm]: 26,0
- Inner Diameter [mm]: 159,7
- MAPP code available
- Test Mark: E1 90R-02C0640 / 1203
- Bore Diameter [mm]: 15,4
- Item number: 24.0128-0246.1
- Manufacturer: ATE
- EAN number: 4006633370554
- Condition: New
price incl. 19% VAT