BMW E46 330i 3.0 Clutch plate (231 hp Petrol M54 B30 (306S3))
Recommended part replacement interval for your car for the part category Clutch plate: every 100.000 km
-
- Transmission Type: Manual Transmission, Sequential Manual Transmission
- Construction Year to: 02 / 2003
- Hub Profile: 23x29-10N
- Number of Teeth: 10
- Parameter: 240D
- Diameter [mm]: 240
- only in connection with: 883082 ...
- Clutch Type: Rigid clutch disc with organic surfaces
- Product line: Performance
- Item number: 881864 999523
- Our price: 393,04 €
- Manufacturer: SACHS PERFORMANCE
- EAN number: 4050451003682
- Condition: New
A reinforced clutch cover has fundamental advantages against Performance clutch disc differences to OE: higher Rigid disk with organic linings an OE clutch cover, such as a higher transmittable torque transmittable torque, higher burst number of revolutions, and higher resistance against thrust. It also allows for start performance similar to OE, effortless exchange with OE clutches. faster and sportier gearshifts. That makes it extremely Typical applications include: application field of dual mass useful for street tuning, endurance races, hill climbing (group N) and for vehicles that are often driven with their flywheels, chip tuning, turbocharger and supercharger maximum gross vehicle weight (construction-site vehicles, modifications, towing trailers, commercial vehicle, ambulances, courier services such as UPS, TNT; DHL, etc.). snowremoval vehicle, passenger car: emergency service, Both rigid and torsion damper clutch discs are available. driving school, taxi, vehicles with maximum gross vehicle Clutch discs with torsion springs function as a vibration weight and according to high load (construction-site damper between engine and gearbox. vehicles, towing service, campers, ambulance cars, etc.), 1/4 mile-race, race circuit (endurance race, clubsport, Due to reinforced clutch components the pedal force can autocross), hill climbing (e.g. group N), rally, slalom, increase and the modulation range can be reduced. Additional clutch and gear noises can appear. drift racing
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
-
- Transmission Type: Manual Transmission, Sequential Manual Transmission
- Construction Year from: 03 / 2003
- Hub Profile: 26x29-22N
- Number of Teeth: 22
- Parameter: 240B
- Diameter [mm]: 240
- only in connection with: 883082 ...
- Clutch Type: Rigid clutch disc with organic surfaces
- Product line: Performance
- Item number: 881864 999515
- Our price: 453,55 €
- Manufacturer: SACHS PERFORMANCE
- EAN number: 4050451003743
- Condition: New
A reinforced clutch cover has fundamental advantages against Performance clutch disc differences to OE: higher Rigid disk with organic linings an OE clutch cover, such as a higher transmittable torque transmittable torque, higher burst number of revolutions, and higher resistance against thrust. It also allows for start performance similar to OE, effortless exchange with OE clutches. faster and sportier gearshifts. That makes it extremely Typical applications include: application field of dual mass useful for street tuning, endurance races, hill climbing (group N) and for vehicles that are often driven with their flywheels, chip tuning, turbocharger and supercharger maximum gross vehicle weight (construction-site vehicles, modifications, towing trailers, commercial vehicle, ambulances, courier services such as UPS, TNT; DHL, etc.). snowremoval vehicle, passenger car: emergency service, Both rigid and torsion damper clutch discs are available. driving school, taxi, vehicles with maximum gross vehicle Clutch discs with torsion springs function as a vibration weight and according to high load (construction-site damper between engine and gearbox. vehicles, towing service, campers, ambulance cars, etc.), 1/4 mile-race, race circuit (endurance race, clubsport, Due to reinforced clutch components the pedal force can autocross), hill climbing (e.g. group N), rally, slalom, increase and the modulation range can be reduced. Additional clutch and gear noises can appear. drift racing
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
-
- Transmission Type: Manual Transmission, Sequential Manual Transmission
- Construction Year to: 02 / 2003
- Hub Profile: 23x29-10N
- Number of Teeth: 10
- Parameter: 240C
- Diameter [mm]: 240
- only in connection with: 883082 ...
- Clutch Type: rigid sintered disc
- Product line: Performance
- Item number: 881864 999524
- Our price: 340,47 €
- Manufacturer: SACHS PERFORMANCE
- EAN number: 4050451003675
- Condition: New
A reinforced clutch cover has fundamental advantages against Performance clutch disc differences to OE: higher thermal Rigid, sintered disk an OE clutch cover, such as a higher transmittable torque capacity compared to organic friction material, higher and higher resistance against thrust. It also allows for transmittable torque compared to organic friction material, faster and sportier gearshifts. That makes it extremely very dirt resistant, aggressive start performance, effortless exchange with OE clutches. useful for street tuning, endurance races, hill climbing (group N) and for vehicles that are often driven with their Typical applications include: race circuit (endurance race, clubsport, autocross), hill climbing (e.g. group N), rally, maximum gross vehicle weight (construction-site vehicles, ambulances, courier services such as UPS, TNT; DHL, etc.). slalom, drift racing, 1/4 mile-race Both rigid and torsion damper clutch discs are available. Clutch discs with torsion springs function as a vibration damper between engine and gearbox. Due to reinforced clutch components the pedal force can increase and the modulation range can be reduced. Additional clutch and gear noises can appear.
price incl. 19% VAT
-
- Transmission Type: Manual Transmission, Sequential Manual Transmission
- Construction Year from: 03 / 2003
- Hub Profile: 26x29-22N
- Number of Teeth: 22
- Parameter: 240C
- Diameter [mm]: 240
- only in connection with: 883082 ...
- Clutch Type: rigid sintered disc
- Product line: Performance
- Item number: 881864 999517
- Our price: 393,04 €
- Manufacturer: SACHS PERFORMANCE
- EAN number: 4050451003736
- Condition: New
A reinforced clutch cover has fundamental advantages against Performance clutch disc differences to OE: higher thermal Rigid, sintered disk an OE clutch cover, such as a higher transmittable torque capacity compared to organic friction material, higher and higher resistance against thrust. It also allows for transmittable torque compared to organic friction material, faster and sportier gearshifts. That makes it extremely very dirt resistant, aggressive start performance, effortless exchange with OE clutches. useful for street tuning, endurance races, hill climbing (group N) and for vehicles that are often driven with their Typical applications include: race circuit (endurance race, clubsport, autocross), hill climbing (e.g. group N), rally, maximum gross vehicle weight (construction-site vehicles, ambulances, courier services such as UPS, TNT; DHL, etc.). slalom, drift racing, 1/4 mile-race Both rigid and torsion damper clutch discs are available. Clutch discs with torsion springs function as a vibration damper between engine and gearbox. Due to reinforced clutch components the pedal force can increase and the modulation range can be reduced. Additional clutch and gear noises can appear.
- Diameter [mm]: 325
- Brake Disc Type: Vented
- Product line: PREMIER
- Brake Disc Thickness [mm]: 25
- Fitting Position: Front Axle
- Height [mm]: 52,5
- Surface: Oiled
- Centering Diameter [mm]: 79
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 120
- Minimum thickness [mm]: 23,4
- Weight [kg]: 18,11
- Tightening Torque [Nm]: 120
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Packing Type: Box
- Packaging length [cm]: 35,2
- Packaging width [cm]: 35,4
- Packaging height [cm]: 12,4
- Drilled: no
- Item number: DDF1174
- Manufacturer: FERODO
- EAN number: 5016687310795
- Condition: New
price incl. 19% VAT
- Diameter [mm]: 325
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 25
- Fitting Position: Front Axle
- Height [mm]: 52,5
- Surface: Oiled
- Centering Diameter [mm]: 79
- Number of Holes: 5
- Minimum thickness [mm]: 23,4
- Test Mark: E1 90R-02C0277 / 1199
- Drilled: no
- Item number: BG3830
- Manufacturer: DELPHI
- EAN number: 5012759281277
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 320
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22
- Fitting Position: Rear Axle
- Height [mm]: 60,7
- Surface: Oiled
- Centering Diameter [mm]: 75
- Number of Holes: 5
- Minimum thickness [mm]: 20
- Test Mark: E1 90R-02C0506 / 1844
- Drilled: no
- Item number: BG3831
- Manufacturer: DELPHI
- EAN number: 5012759292495
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year from: 09 / 2000
- Fitting Position: Front Axle
- Diameter [mm]: 325
- Brake Disc Type: internally vented
- Brake Disc Thickness [mm]: 25
- Height [mm]: 53
- Centering Diameter [mm]: 79
- Number of Holes: 5
- Minimum thickness [mm]: 23,4
- Drilled: no
- Item number: B2548V
- Manufacturer: LPR
- EAN number: 8032532087381
- Condition: New
price incl. 19% VAT
- Quantity Unit: Axle Set
- Brake System: ATE
- Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact
- Fitting Position: Front Axle
- Height [mm]: 63,6
- Width [mm]: 156,4
- Test Mark: ECE R-90
- Brake Disc Thickness [mm]: 20,0
- Production Number: 6002660
- Item number: 6002660
- Our price: 35,34 €
- Manufacturer: KRAFT
- EAN number: 5901159158879
- Condition: New
- Diameter [mm]: 325
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 25
- Fitting Position: Front Axle
- Height [mm]: 52,6
- Centering Diameter [mm]: 79
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 120
- Minimum thickness [mm]: 23,4
- Drilled: no
- Item number: BDC5228
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593657915
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Quantity Unit: Axle Set
- Brake System: ATE
- Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact
- Thickness [mm]: 20,3
- Product line: Ceramic
- Fitting Position: Front Axle
- Height [mm]: 63,5
- Width 2 [mm]: 156,3
- Width 1 [mm]: 155,1
- Test Mark: E1 90R-02A0258 / 0294
- MAPP code available
- Article number of recommended accessories: 24.8190-0227.2, 24.8190-0240.2, 24.8190-0244.2, 24.8190-2801.2
- Observe dimensions
- Permissible up to vehicle capacity [kW]: 225
- Item number: 13.0470-7155.2
- Our price: 75,62 €
- Manufacturer: ATE
- EAN number: 4006633339964
- Condition: New
Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.
- Diameter [mm]: 325,0
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 24,9
- Fitting Position: Front Axle
- Height [mm]: 52,6
- Surface: Coated
- Centering Diameter [mm]: 79,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 120,0
- Minimum thickness [mm]: 23,4
- Inner Diameter [mm]: 174,0
- Machining: High-carbon
- MAPP code available
- Test Mark: E1 90R-02C0115 / 0435
- Bore Diameter [mm]: 14,5
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0125-0138.1
- Manufacturer: ATE
- EAN number: 4006633084048
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 325,0
- Brake Disc Type: Vented
- Product line: PowerDisc
- Brake Disc Thickness [mm]: 24,9
- Fitting Position: Front Axle
- Height [mm]: 52,6
- Surface: Coated
- Centering Diameter [mm]: 79,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 120,0
- Minimum thickness [mm]: 22,6
- Inner Diameter [mm]: 174,0
- Machining: High-carbon
- MAPP code available
- Bore Diameter [mm]: 14,5
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0325-0138.1
- Manufacturer: ATE
- EAN number: 4006633120357
- Condition: New
For vehicles without ABS, a PowerDisc can be used on the rea r axle only if there is one on the front axle. The General Operating Permit (ABE) for the PowerDisc applies to operation on German roads in accordance with the German Road Traffic Registration Ordinance (StVZO). Other countries may require additional type approvals for use on roads.
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 320
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22
- Fitting Position: Rear Axle
- Height [mm]: 49
- Centering Diameter [mm]: 75
- Number of Holes: 5
- Minimum thickness [mm]: 20,4
- Drilled: no
- Item number: 15669
- Manufacturer: MAPCO
- EAN number: 4043605416698
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year from: 09 / 2000
- Fitting Position: Rear Axle
- Diameter [mm]: 320
- Brake Disc Type: internally vented
- Brake Disc Thickness [mm]: 22
- Height [mm]: 60,5
- Centering Diameter [mm]: 75
- Number of Holes: 5
- Minimum thickness [mm]: 20,4
- Drilled: no
- Item number: B2007V
- Manufacturer: LPR
- EAN number: 8032532055939
- Condition: New
price incl. 19% VAT
- Diameter [mm]: 320
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22
- Fitting Position: Rear Axle
- Height [mm]: 60,5
- Centering Diameter [mm]: 75
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 120
- Minimum thickness [mm]: 20,4
- Drilled: no
- Item number: BDC5227
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593657908
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Quantity Unit: Axle Set
- Brake System: ATE
- Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact
- Thickness [mm]: 17,3
- Fitting Position: Rear Axle
- Height [mm]: 59,2
- Width [mm]: 123,0
- Test Mark: E1 90R-02A0525 / 0487, E9 90R-02A1163 / 0785
- MAPP code available
- Article number of recommended accessories: 24.8190-0209.2, 24.8190-0218.2, 24.8190-0221.2, 24.8190-0226.2, 24.8190-0228.2, 24.8190-0241.2, 24.8190-0245.2, 24.8190-1308.2
- Observe dimensions
- Item number: 13.0460-7079.2
- Our price: 50,17 €
- Manufacturer: ATE
- EAN number: 4006633281294
- Condition: New
- Quantity Unit: Axle Set
- Brake System: ATE
- Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact
- Thickness [mm]: 20,3
- Fitting Position: Front Axle
- Height [mm]: 63,5
- Width 2 [mm]: 156,3
- Width 1 [mm]: 155,1
- Test Mark: E1 90R-02A0334 / 0293
- MAPP code available
- Article number of recommended accessories: 24.8190-0227.2, 24.8190-0240.2, 24.8190-0244.2, 24.8190-2801.2
- Observe dimensions
- Item number: 13.0460-7155.2
- Our price: 53,32 €
- Manufacturer: ATE
- EAN number: 4006633091237
- Condition: New
- Quantity Unit: Axle Set
- Brake System: ATE
- Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact
- Thickness [mm]: 17,3
- Product line: Ceramic
- Fitting Position: Rear Axle
- Height [mm]: 59,2
- Width [mm]: 123,0
- Test Mark: E1 90R-02A0258 / 0339
- MAPP code available
- Article number of recommended accessories: 24.8190-0209.2, 24.8190-0218.2, 24.8190-0221.2, 24.8190-0226.2, 24.8190-0228.2, 24.8190-0241.2, 24.8190-0245.2, 24.8190-1308.2
- Observe dimensions
- Permissible up to vehicle capacity [kW]: 225
- Item number: 13.0470-7079.2
- Our price: 69,21 €
- Manufacturer: ATE
- EAN number: 4006633339827
- Condition: New
Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.
- Diameter [mm]: 320,0
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22,0
- Fitting Position: Rear Axle
- Height [mm]: 60,5
- Surface: Coated
- Centering Diameter [mm]: 75,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 120,0
- Minimum thickness [mm]: 20,4
- Inner Diameter [mm]: 185,0
- Machining: High-carbon
- MAPP code available
- Test Mark: E1 90R-02C0234 / 0996
- Bore Diameter [mm]: 14,5
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0122-0209.1
- Manufacturer: ATE
- EAN number: 4006633102063
- Condition: New
price incl. 19% VAT
excl. delivery costs