• SHOP
  • CLUB
0
My Garage
Add vehicle
0
items #
0,00 €
Your basket is empty

Audi A6 C6 Allroad 3.0 TDI quattro Clutch plate (211 hp Diesel BNG)

Clutch disc Audi A6 C6 Allroad 3.0 TDI quattro 211 Diesel

Recommended part replacement interval for your car for the part category Clutch plate: every 100.000 km

2 items
Sort by:
Recommended
  • Hub Profile: 21,8x24,2-23N
  • Number of Teeth: 23
  • Parameter: 240C
  • Diameter: 240
  • Clutch Type: rigid sintered disc
  • Product line: Performance
  • Item number: 881864 000685
  • Our price: 382,00 €
  • Manufacturer: SACHS PERFORMANCE
  • EAN number: 4353651005044
  • Condition: New
Show OEM numbers of the product
Additional information

Performance clutch disc differences to OE: higher Rigid, sintered disk transmittable torque, higher burst number of revolutions, start performance similar to OE, effortless exchange with OE clutches. Typical applications include: application field of dual mass flywheels, chip tuning, turbocharger and supercharger modifications, towing trailers, commercial vehicle, snowremoval vehicle, passenger car: emergency service, driving school, taxi, vehicles with maximum gross vehicle weight and according to high load (construction-site vehicles, towing service, campers, ambulance cars, etc.), 1/4 mile-race, race circuit (endurance race, clubsport, autocross), hill climbing (e.g. group N), rally, slalom, drift racing

Details
Get a bonus of 1,36 € when you purchase this product
You will receive 1,36 € in your bonus account if you buy this product:
  • Accumulate your bonuses through purchasing items marked “BONUS";
  • Pay for up to 10% of your order with the accumulated bonuses;
More
Free delivery on this item
In stock (Item(s) left: 2)
382,00 €

price incl. 19% VAT

free delivery

  • Number of Teeth: 23
  • Hub Profile: 21,8x24,2-23N
  • Parameter: 240S
  • Diameter: 240
  • Clutch Type: rigid sintered disc
  • Product line: Performance
  • Item number: 881864 999809
  • Our price: 291,50 €
  • Manufacturer: SACHS PERFORMANCE
  • EAN number: 4013872338412
  • Condition: New
Additional information

A reinforced clutch cover has fundamental advantages against Performance clutch disc differences to OE: higher thermal Rigid, sintered disk an OE clutch cover, such as a higher transmittable torque capacity compared to organic friction material, higher and higher resistance against thrust. It also allows for transmittable torque compared to organic friction material, faster and sportier gearshifts. That makes it extremely very dirt resistant, aggressive start performance, effortless exchange with OE clutches. useful for street tuning, endurance races, hill climbing (group N) and for vehicles that are often driven with their Typical applications include: race circuit (endurance race, clubsport, autocross), hill climbing (e.g. group N), rally, maximum gross vehicle weight (construction-site vehicles, ambulances, courier services such as UPS, TNT; DHL, etc.). slalom, drift racing, 1/4 mile-race Both rigid and torsion damper clutch discs are available. Clutch discs with torsion springs function as a vibration damper between engine and gearbox. Due to reinforced clutch components the pedal force can increase and the modulation range can be reduced. Additional clutch and gear noises can appear.

Details
Free delivery on this item
291,50 €

price incl. 19% VAT

free delivery

AUDI A6 Allroad (4FH, C6) 3.0 TDI quattro Bestsellers
  • Fitting Position: Front Axle
  • Diameter: 347
  • for PR number: 1ZL
  • Brake Disc Type: Vented
  • Drilled: no
  • Brake Disc Thickness: 30
  • Height [mm]: 59,5
  • Centering Diameter [mm]: 68
  • Number of Holes: 5
  • Bolt Hole Circle Ø [mm]: 112
  • Item number: 25873
  • Manufacturer: MAPCO
  • EAN number: 4043605420688
  • Condition: New
Show OEM numbers of the product
Details
Free delivery on this item
In stock
-67%
compared to RRP 233,24 €

74,99 €
Price per item
149,98 € / Price per 2 items

price incl. 19% VAT

free delivery

  • Fitting Position: Front Axle
  • Diameter: 321
  • for PR number: 1LG
  • Construction Year to: 05 / 2011
  • Brake Disc Type: Vented
  • Drilled: no
  • Brake Disc Thickness: 30
  • Height [mm]: 59,7
  • Centering Diameter [mm]: 68
  • Number of Holes: 5
  • Bolt Hole Circle Ø [mm]: 112
  • Inner Diameter [mm]: 144,8
  • Item number: 25876
  • Manufacturer: MAPCO
  • EAN number: 4043605425874
  • Condition: New
Show OEM numbers of the product
Details
Free delivery on this item
In stock
-71%
compared to RRP 215,39 €

60,49 €
Price per item
120,98 € / Price per 2 items

price incl. 19% VAT

free delivery

  • Fitting Position: Front Axle
  • Brake System: ATE
  • for PR number: 1LG
  • Wear Warning Contact: incl. wear warning contact
  • Thickness [mm]: 20
  • Quantity Unit: Axle Set
  • Number of wear indicators [per axle]: 2
  • Height [mm]: 72,9
  • Width [mm]: 156,4
  • Width 2 [mm]: 155,2
  • Width 1 [mm]: 156,4
  • Number of pads: 4
  • Warning Contact Length [mm]: 210
  • Item number: C1A042ABE
  • Our price: 38,49 €
  • Manufacturer: ABE
  • EAN number: 5900427187238
  • Condition: New
Show OEM numbers of the product
Details
In stock
38,49 €

price incl. 19% VAT

excl. delivery costs

DELPHI BG4087 Brake disc Rear Axle, 330x22mm, 5, Vented
Article number: BG4087
Submit a review
  • Fitting Position: Rear Axle
  • Diameter: 330
  • for PR number: 1KW
  • Brake Disc Type: Vented
  • Drilled: no
  • Surface: Oiled
  • Brake Disc Thickness: 22
  • Height [mm]: 42,5
  • Centering Diameter [mm]: 68
  • Number of Holes: 5
  • Minimum thickness [mm]: 20
  • Test Mark: E1 90R-02C0592 / 2013
  • Item number: BG4087
  • Manufacturer: DELPHI
  • EAN number: 5012759422304
  • Condition: New
Show OEM numbers of the product
Details
In stock (Item(s) left: 4)
-62%
compared to RRP 108,67 €

40,49 €
Price per item
80,98 € / Price per 2 items

price incl. 19% VAT

excl. delivery costs

DELPHI BG9955 Brake disc Front Axle, 347x30mm, 5, Vented
Article number: BG9955
Submit a review
  • Fitting Position: Front Axle
  • Diameter: 347
  • Brake Disc Type: Vented
  • Drilled: no
  • Surface: Oiled
  • Brake Disc Thickness: 30
  • Height [mm]: 59,5
  • Centering Diameter [mm]: 68
  • Number of Holes: 5
  • Minimum thickness [mm]: 28
  • Item number: BG9955
  • Manufacturer: DELPHI
  • EAN number: 5012759360743
  • Condition: New
Show OEM numbers of the product
Details
In stock (Item(s) left: 6)
-66%
compared to RRP 163,35 €

54,99 €
Price per item
109,98 € / Price per 2 items

price incl. 19% VAT

excl. delivery costs

0897.00 Clutch plate Audi A6 3.0TDI quattro 211 hp 155 kW CDYB 2007 4FH, C6 Sample photo only D1018-7921 REMSA 089700 Clutch disc AUDI A6 C6 Allroad (4FH) 3.0 TDI quattro 211 hp Diesel 2010 price
REMSA 0897.00 Brake pad set Rear Axle
Article number: 0897.00
Submit a review
  • Fitting Position: Rear Axle
  • for PR number: 1KW
  • Supplementary Article / Supplementary Info: with accessories
  • Supplementary Article / Supplementary Info Info 2: with adhesive film
  • Quantity Unit: Axle Set
  • Item number: 0897.00
  • Our price: 30,49 €
  • Manufacturer: REMSA
  • EAN number: 8427975021977
  • Condition: New
Show OEM numbers of the product
Details
In stock
30,49 €

price incl. 19% VAT

excl. delivery costs

  • Fitting Position: Front Axle
  • Diameter: 347
  • for PR number: 1ZL
  • Construction Year to: 05 / 2011
  • Brake Disc Type: internally vented
  • Drilled: no
  • Brake Disc Thickness: 30
  • Centering Diameter [mm]: 68
  • Number of Holes: 5
  • Minimum thickness [mm]: 28
  • Item number: A1008V
  • Manufacturer: LPR
  • EAN number: 8032928001731
  • Condition: New
Show OEM numbers of the product
Details
Free delivery on this item
In stock (Item(s) left: 4)
64,99 €
Price per item
129,98 € / Price per 2 items

price incl. 19% VAT

free delivery

  • Fitting Position: Front Axle
  • Diameter: 321
  • for PR number: 1LG
  • Construction Year to: 05 / 2011
  • Brake Disc Type: internally vented
  • Drilled: no
  • Brake Disc Thickness: 30
  • Height [mm]: 59,7
  • Centering Diameter [mm]: 68
  • Number of Holes: 5
  • Minimum thickness [mm]: 28
  • Item number: A1019V
  • Manufacturer: LPR
  • EAN number: 8032928035293
  • Condition: New
Show OEM numbers of the product
Details
Free delivery on this item
In stock
61,49 €
Price per item
122,98 € / Price per 2 items

price incl. 19% VAT

free delivery

  • Fitting Position: Rear Axle
  • Brake System: Lucas / TRW
  • for PR number: 1KD
  • Construction Year to: 05 / 2011
  • Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact
  • Supplementary Article / Supplementary Info: with accessories
  • Supplementary Article / Supplementary Info Info 2: with brake caliper screws
  • Thickness [mm]: 17,1
  • Quantity Unit: Axle Set
  • Height [mm]: 55,9
  • Width [mm]: 105,3
  • Test Mark: E1 90R-02A0498 / 0349, E9 90R-02A1163 / 0750
  • Vehicle Equipment: for vehicles without electric parking brake
  • MAPP code available
  • Article number of recommended accessories: 13.0460-0035.2, 13.0460-0259.2
  • Number of bolts / screws: 4
  • Observe dimensions
  • Item number: 13.0460-2880.2
  • Our price: 37,49 €
  • Manufacturer: ATE
  • EAN number: 4006633119153
  • Condition: New
Show OEM numbers of the product
Additional information

for vehicles without electric handbrake

Details
In stock
-61%
compared to RRP 96,39 €

37,49 €

price incl. 19% VAT

excl. delivery costs

  • Fitting Position: Front Axle
  • Brake System: ATE
  • for PR number: 1LG, 1ZL
  • Construction Year to: 05 / 2011
  • Wear Warning Contact: incl. wear warning contact
  • Thickness [mm]: 20,3
  • Quantity Unit: Axle Set
  • Height 1 [mm]: 155,1
  • Height 2 [mm]: 156,3
  • Width 2 [mm]: 72,9
  • Width 1 [mm]: 72,9
  • Test Mark: E9 90R-02A1259 / 0708
  • Warning Contact Length [mm]: 242,5
  • MAPP code available
  • Item number: 13.0460-7201.2
  • Our price: 75,99 €
  • Manufacturer: ATE
  • EAN number: 4006633188340
  • Condition: New
Show OEM numbers of the product
Details
In stock
-60%
compared to RRP 194,21 €

75,99 €

price incl. 19% VAT

excl. delivery costs

  • Fitting Position: Rear Axle
  • Paired product: FDB1636
  • Diameter: 302
  • for PR number: 1KD
  • Brake Disc Type: solid
  • Drilled: no
  • Surface: Coated
  • Supplementary Article / Supplementary Info Info 2: with bolts / screws
  • Vehicle Equipment: for vehicles with electric parking brake
  • Product line: PREMIER
  • Brake Disc Thickness: 12
  • Height [mm]: 42,4
  • Centering Diameter [mm]: 66
  • Number of Holes: 5
  • Minimum thickness [mm]: 10
  • Weight [kg]: 10,68
  • Tightening Torque [Nm]: 120
  • Packing Type: Box
  • Packaging length [cm]: 30,5
  • Packaging width [cm]: 30,5
  • Packaging height [cm]: 9,6
  • Item number: DDF1850C
  • Manufacturer: FERODO
  • EAN number: 4044197564446
  • Condition: New
Show OEM numbers of the product
Details
Free delivery on this item
In stock (Item(s) left: 2)
-39%
compared to RRP 116,98 €

70,49 €
Price per item
140,98 € / Price per 2 items

price incl. 19% VAT

free delivery

  • Fitting Position: Rear Axle
  • Diameter: 330
  • Brake Disc Type: Vented
  • Drilled: no
  • for combined PR number: 1KW+2EE
  • Brake Disc Thickness: 22
  • Height [mm]: 42,5
  • Centering Diameter [mm]: 68
  • Number of Holes: 5
  • Bolt Hole Circle Ø [mm]: 112
  • Item number: 25839
  • Manufacturer: MAPCO
  • EAN number: 4043605449443
  • Condition: New
Show OEM numbers of the product
Details
In stock
-74%
compared to RRP 155,89 €

40,49 €
Price per item
80,98 € / Price per 2 items

price incl. 19% VAT

excl. delivery costs

ABE C3A030ABE Brake disc Front Axle, 321x30mm, 5x112, Vented
Article number: C3A030ABE
Submit a review
  • Fitting Position: Front Axle
  • Diameter: 321
  • for PR number: 1LG
  • Brake Disc Type: Vented
  • Drilled: no
  • Machining: High-carbon
  • Brake Disc Thickness: 30
  • Height [mm]: 59,5
  • Centering Diameter [mm]: 68
  • Number of Holes: 5
  • Bolt Hole Circle Ø [mm]: 112
  • Minimum thickness [mm]: 28
  • Thread Size: 15,3
  • Item number: C3A030ABE
  • Manufacturer: ABE
  • EAN number: 5900427198678
  • Condition: New
Show OEM numbers of the product
Details
Free delivery on this item
In stock (Item(s) left: 6)
55,49 €
Price per item
110,98 € / Price per 2 items

price incl. 19% VAT

free delivery

DELPHI BG4088 Brake disc Rear Axle, 302x12mm, 5, solid
Article number: BG4088
Submit a review
  • Fitting Position: Rear Axle
  • Diameter: 302
  • for PR number: 1KD
  • Brake Disc Type: solid
  • Drilled: no
  • Surface: Oiled
  • Brake Disc Thickness: 12
  • Height [mm]: 42,4
  • Centering Diameter [mm]: 68
  • Number of Holes: 5
  • Minimum thickness [mm]: 10
  • Test Mark: E1 90R-02C0100 / 1556
  • Item number: BG4088
  • Manufacturer: DELPHI
  • EAN number: 5012759416280
  • Condition: New
Show OEM numbers of the product
Details
Free delivery on this item
In stock (Item(s) left: 2)
-15%
compared to RRP 114,18 €

95,99 €
Price per item
191,98 € / Price per 2 items

price incl. 19% VAT

free delivery

  • Fitting Position: Rear Axle
  • Brake System: Lucas II
  • Wear Warning Contact: incl. wear warning contact
  • Quantity Unit: Axle Set
  • Height [mm]: 59,0
  • Width [mm]: 116,2
  • Test Mark: ECE R-90
  • Brake Disc Thickness: 17,5
  • Production Number: 6010907
  • Item number: 6010907
  • Our price: 28,99 €
  • Manufacturer: KRAFT
  • EAN number: 5900427194267
  • Condition: New
Show OEM numbers of the product
Details
In stock
28,99 €

price incl. 19% VAT

excl. delivery costs

KRAFT 6010090 Brake pad set Rear Axle
Article number: 6010090
Reviews - 2
  • Fitting Position: Rear Axle
  • Brake System: Girling
  • Quantity Unit: Axle Set
  • Height [mm]: 55,8
  • Width [mm]: 105,3
  • Test Mark: ECE R-90
  • Brake Disc Thickness: 17,1
  • Production Number: 6010090
  • Item number: 6010090
  • Our price: 22,99 €
  • Manufacturer: KRAFT
  • EAN number: 5900427194250
  • Condition: New
Show OEM numbers of the product
Details
In stock
22,99 €

price incl. 19% VAT

excl. delivery costs

  • Fitting Position: Rear Axle
  • Brake System: Lucas / TRW
  • for PR number: 1KD
  • Construction Year to: 05 / 2011
  • Wear Warning Contact: not prepared for wear warning indicator, excl. wear warning contact
  • Supplementary Article / Supplementary Info: with accessories
  • Supplementary Article / Supplementary Info Info 2: with brake caliper screws
  • Thickness [mm]: 16,9
  • Quantity Unit: Axle Set
  • Height [mm]: 56,4
  • Width [mm]: 105,2
  • Test Mark: E1 90R-02A0498 / 0349
  • Vehicle Equipment: for vehicles with electric parking brake
  • MAPP code available
  • Article number of recommended accessories: 13.0460-0517.2
  • Number of bolts / screws: 4
  • Item number: 13.0460-2749.2
  • Our price: 37,99 €
  • Manufacturer: ATE
  • EAN number: 4006633330015
  • Condition: New
Show OEM numbers of the product
Additional information

for vehicles with electric handbrake

Details
In stock
-59%
compared to RRP 94,01 €

37,99 €

price incl. 19% VAT

excl. delivery costs

  • Fitting Position: Rear Axle
  • Brake System: Lucas / TRW
  • for PR number: 1KW, 2EE
  • Construction Year to: 05 / 2011
  • Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact
  • Supplementary Article / Supplementary Info Info 2: with brake caliper screws
  • Vehicle Equipment: for vehicles with electric parking brake
  • Thickness [mm]: 17,4
  • Quantity Unit: Axle Set
  • Height [mm]: 59,0
  • Width [mm]: 116,1
  • Test Mark: E1 90R-02A0498 / 0489
  • MAPP code available
  • Article number of recommended accessories: 13.0460-0023.2
  • Number of bolts / screws: 4
  • Observe dimensions
  • Item number: 13.0460-2888.2
  • Our price: 58,99 €
  • Manufacturer: ATE
  • EAN number: 4006633201506
  • Condition: New
Show OEM numbers of the product
Details
In stock
-58%
compared to RRP 140,90 €

58,99 €

price incl. 19% VAT

excl. delivery costs

Find the best offers on