FORD Escort Mk5 Estate (ANL) 1.8 16V Central slave cylinder (105 hp Petrol RDA)
Recommended part replacement interval for your car for the part category Central slave cylinder: every 100.000 km
- Transmission ID: B5, IB5
- Number of mounting bores: 3
- Required quantity: 1
- Bore Diameter [mm]: 28
- Item number: 61-0014
- Our price: 50,54 €
- Manufacturer: MAXGEAR
- EAN number: 5907558559026
- Condition: New
- Transmission ID: B5, IB5
- Operating Mode: Hydraulic
- Bore Diameter [mm]: 28
- Item number: 301 229
- Our price: 39,70 €
- Manufacturer: TOPRAN
- EAN number: 1265390000057
- Condition: New
Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
price incl. 19% VAT
excl. delivery costs
- Transmission ID: B5, IB5
- Packaging width [cm]: 10,2
- Packaging height [cm]: 25,1
- Weight [kg]: 0,6429
- Bore Diameter [mm]: 28
- Supplementary Info: Q+, original equipment manufacturer quality
- Packaging Depth [cm]: 9,3
- Item number: V25-8178
- Our price: 45,52 €
- Manufacturer: VAICO
- EAN number: 4046001424762
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
price incl. 19% VAT
excl. delivery costs
- Transmission ID: B5, IB5
- Brake System: SACHS
- Number of mounting bores: 3
- Observe service information
- for OE number: 1 838 043
- Manufacturer Restriction: FAG
- Material: Plastic, Aluminium
- Operating Mode: Hydraulic
- Bore Diameter [mm]: 28
- Thread Size: 13, plug-in connect.sys.
- for manufacturer number: ZA2802.4.21
- Item number: 1411032
- Our price: 49,38 €
- Manufacturer: hajus Autoteile
- EAN number: 1411032000019
- Condition: New
-
- Fitting Position: Front Axle
- Braking / Drive Dynamics: for vehicles with ABS
- Diameter [mm]: 260
- Brake Disc Type: Vented
- Product line: PREMIER
- Brake Disc Thickness [mm]: 24
- Height [mm]: 43,8
- Surface: Oiled
- Centering Diameter [mm]: 63,6
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 108
- Minimum thickness [mm]: 22,2
- Weight [kg]: 11,08
- Tightening Torque [Nm]: 100
- Test Mark: R90 homologated
- Supplementary Article / Supplementary Info Info 2: without bolts / screws
- Packing Type: Box
- Packaging length [cm]: 25,5
- Packaging width [cm]: 25,5
- Packaging height [cm]: 8,5
- Drilled: no
- Item number: DDF423
- Manufacturer: FERODO
- EAN number: 5016687142396
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 240
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 20
- Fitting Position: Front Axle
- Height [mm]: 43
- Centering Diameter [mm]: 63,6
- Number of Holes: 4
- Thickness [mm]: 20
- Minimum thickness [mm]: 18
- Brakes- / Drive Dynamics Articles: not for ABS
- Drilled: no
- Item number: C3G010ABE
- Manufacturer: ABE
- EAN number: 5900427199798
- Condition: New
-
- Construction Year to: 12 / 1992
- Fitting Position: Front Axle
- Braking / Drive Dynamics: for vehicles without ABS
- Diameter [mm]: 240
- Brake Disc Type: internally vented
- Brake System: BENDIX
- Brake Disc Thickness [mm]: 20
- Height [mm]: 43
- Centering Diameter [mm]: 64
- Number of Holes: 4
- Minimum thickness [mm]: 18
- for article number: F1111V
- Drilled: no
- Item number: F1111V
- Manufacturer: LPR
- EAN number: 8032532070420
- Condition: New
price incl. 19% VAT
- Diameter [mm]: 240
- Brake Disc Type: Vented
- Supplementary Info: ORIGINAL Quality
- Brake Disc Thickness [mm]: 20
- Fitting Position: Front Axle
- Height [mm]: 43
- Centering Diameter [mm]: 63,5
- Number of Holes: 4
- Wheel Bolt Bore Diameter [mm]: 13,7
- Bolt Hole Circle Ø [mm]: 108
- Minimum thickness [mm]: 18
- Required quantity: 2
- Drilled: no
- Item number: 715 521 7017
- Manufacturer: MEYLE
- EAN number: 4040074287606
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Supplementary Article / Supplementary Info: with spring
- Fitting Position: Front Axle
- Quantity Unit: Axle Set
- Brake System: Bendix
- Wear Warning Contact: not prepared for wear warning indicator, excl. wear warning contact
- Thickness [mm]: 18
- Height [mm]: 57,3
- Width [mm]: 130,8
- Test Mark: E1 90R-01143 / 030
- MAPP code available
- Item number: 13.0460-3965.2
- Our price: 22,32 €
- Manufacturer: ATE
- EAN number: 4006633286879
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year to: 12 / 1994
- Fitting Position: Front Axle
- Quantity Unit: Axle Set
- Brake System: Bosch
- Thickness [mm]: 17,5
- Material: Low-Metallic
- Height [mm]: 57,3
- Width [mm]: 130,8
- WVA Number: 21171
- Test Mark: ECE-R90
- Article number of recommended accessories: 1987474199, 1987474311, 1987474211
- Observe technical data
- Item number: 0 986 460 949
- Our price: 14,42 €
- Manufacturer: BOSCH
- EAN number: 3165143662861
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 240
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 20
- Fitting Position: Front Axle
- Height [mm]: 43
- Surface: Oiled
- Centering Diameter [mm]: 63,6
- Number of Holes: 4
- Minimum thickness [mm]: 18
- Test Mark: E1 90R-02C0957 / 2559
- Drilled: no
- Item number: BG2440
- Manufacturer: DELPHI
- EAN number: 5012759424391
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Rear Axle
- Braking / Drive Dynamics: for vehicles with ABS
- Diameter [mm]: 273
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 20
- Height [mm]: 43
- Surface: Oiled
- Centering Diameter [mm]: 63,5
- Number of Holes: 4
- Minimum thickness [mm]: 18
- Test Mark: E1 90R-02C0289 / 0504
- Drilled: no
- Item number: BG2758
- Manufacturer: DELPHI
- EAN number: 5012759923658
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 260
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 24
- Fitting Position: Front Axle
- Height [mm]: 44
- Surface: Oiled
- Centering Diameter [mm]: 63,5
- Number of Holes: 4
- Minimum thickness [mm]: 22,2
- Test Mark: E1 90R-02C0289 / 1818
- Drilled: no
- Item number: BG2780
- Manufacturer: DELPHI
- EAN number: 5012759923788
- Condition: New
- Diameter [mm]: 253
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 10
- Fitting Position: Rear Axle
- Height [mm]: 33
- Centering Diameter [mm]: 64
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 108
- Minimum thickness [mm]: 9
- Drilled: no
- Item number: BDC3583
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593167100
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 240
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 20
- Fitting Position: Front Axle
- Height [mm]: 43
- Centering Diameter [mm]: 64
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 108
- Minimum thickness [mm]: 18
- Drilled: no
- Item number: BDC3727
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593240308
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 240
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 20,0
- Fitting Position: Front Axle
- Height [mm]: 43
- Centering Diameter [mm]: 63,5
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 108,0
- Minimum thickness [mm]: 18,0
- Inner Diameter [mm]: 136,0
- Bore Diameter [mm]: 13,7
- Drilled: no
- Item number: BAR20147
- Manufacturer: Barum
- EAN number: 4006633322430
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Braking / Drive Dynamics: for vehicles with ABS
- Fitting Position: Rear Axle
- Quantity Unit: Axle Set
- Brake System: ATE
- Wear Warning Contact: not prepared for wear warning indicator, excl. wear warning contact
- Thickness [mm]: 14,9
- Height [mm]: 51,1
- Width [mm]: 61,7
- MAPP code available
- Article number of recommended accessories: 13.0460-0436.2
- Observe dimensions
- Item number: 13.0460-4058.2
- Our price: 42,14 €
- Manufacturer: ATE
- EAN number: 4006633278935
- Condition: New
price incl. 19% VAT
- Diameter [mm]: 240
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 20,0
- Fitting Position: Front Axle
- Height [mm]: 43
- Surface: Coated
- Centering Diameter [mm]: 63,5
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 108,0
- Minimum thickness [mm]: 18,0
- Inner Diameter [mm]: 136,0
- MAPP code available
- Test Mark: E1 90R-02C0115 / 0084
- Bore Diameter [mm]: 13,7
- Drilled: no
- Item number: 24.0120-0147.1
- Manufacturer: ATE
- EAN number: 4006633144476
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 240
- Brake Disc Type: Vented
- Product line: PowerDisc
- Brake Disc Thickness [mm]: 20,0
- Fitting Position: Front Axle
- Height [mm]: 43
- Surface: Coated
- Centering Diameter [mm]: 63,5
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 108,0
- Minimum thickness [mm]: 18,0
- Inner Diameter [mm]: 136,0
- MAPP code available
- Bore Diameter [mm]: 13,7
- Drilled: no
- Item number: 24.0320-0147.1
- Manufacturer: ATE
- EAN number: 4006633276146
- Condition: New
For vehicles without ABS, a PowerDisc can be used on the rea r axle only if there is one on the front axle. The General Operating Permit (ABE) for the PowerDisc applies to operation on German roads in accordance with the German Road Traffic Registration Ordinance (StVZO). Other countries may require additional type approvals for use on roads.
price incl. 19% VAT
excl. delivery costs
-
- Construction Year to: 12 / 1994
- Fitting Position: Front Axle
- Quantity Unit: Axle Set
- Brake System: Bosch
- Thickness [mm]: 17,5
- Material: Low-Metallic
- Height [mm]: 57,3
- Width [mm]: 131
- WVA Number: 23300
- Test Mark: ECE-R90
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate
- Article number of recommended accessories: 1987474175, 1987474311, 1987474211, 1987474199
- Observe technical data
- Item number: 0 986 424 644
- Our price: 16,31 €
- Manufacturer: BOSCH
- EAN number: 3165143776902
- Condition: New
price incl. 19% VAT
excl. delivery costs