Golf 1j5 2.0 4motion Camshaft sensor (120 hp Petrol ATF)
- Sensor Type: Hall Sensor
- Number of pins: 3
- Supplementary Info: ORIGINAL Quality
- Engine Code: APK, AQY, AZH, AZJ, AZG, BEH, BHY
- Supplementary Article / Supplementary Info: with holder
- Supplementary Article / Supplementary Info Info 2: without seal ring, with cable
- Item number: 100 899 0012
- Our price: 19,68 €
- Manufacturer: MEYLE
- EAN number: 4040074471388
- Condition: New
- Cable Length [mm]: 135
- Sensor Type: Active sensor
- Number of pins: 3
- Item number: 08-S039
- Our price: 110,26 €
- Manufacturer: OPTIMAL
- EAN number: 4031185592659
- Condition: New
- Number of pins: 2
- Transmission Type: 4-Speed Automatic Transmission
- Supplementary Article / Supplementary Info Info 2: without cable, with seal ring
- Weight [kg]: 0,02537
- Packaging width [cm]: 4, 3,8
- Packaging height [cm]: 6,7, 2,45
- Packaging Depth [cm]: 6,8, 4,75
- Product line: Q+, original equipment manufacturer quality MADE IN GERMANY
- Item number: V10-72-0906
- Our price: 25,40 €
- Manufacturer: VEMO
- EAN number: 4046001285660
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
- Construction Year from: 04 / 2000
- for PR number: 1KE
- Fitting Position: Rear Axle
- Quantity Unit: Axle Set
- Brake System: Lucas / TRW
- Wear Warning Contact: excl. wear warning contact
- Thickness [mm]: 17,2
- Supplementary Article / Supplementary Info: with accessories
- Height [mm]: 52,9
- Width [mm]: 87,6
- Test Mark: E1 90R-02A0333 / 0221, E1 90R-02A0650 / 0200
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- MAPP code available
- Article number of recommended accessories: 13.0460-0072.2
- Number of bolts / screws: 4
- Observe dimensions
- Item number: 13.0460-2894.2
- Our price: 27,95 €
- Manufacturer: ATE
- EAN number: 4006633201643
- Condition: New
-
- Construction Year from: 04 / 2000
- for PR number: 2EE, 2EL
- Fitting Position: Rear Axle
- Quantity Unit: Axle Set
- Brake System: Lucas / TRW
- Wear Warning Contact: excl. wear warning contact
- Thickness [mm]: 17,2
- Product line: Ceramic
- Height [mm]: 52,9
- Width [mm]: 87,6
- Test Mark: E1 90R-02A0258 / 0193
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- MAPP code available
- Article number of recommended accessories: 13.0460-0072.2
- Number of bolts / screws: 4
- Observe dimensions
- Permissible up to vehicle capacity [kW]: 225
- Item number: 13.0470-2820.2
- Our price: 38,27 €
- Manufacturer: ATE
- EAN number: 4006633339483
- Condition: New
Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.
-
- Construction Year from: 04 / 2000
- for PR number: 1KE
- Fitting Position: Rear Axle
- Diameter [mm]: 239
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 8,9
- Height [mm]: 33,4
- Surface: Coated
- Centering Diameter [mm]: 65,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100,0
- Minimum thickness [mm]: 7,0
- Inner Diameter [mm]: 132,5
- MAPP code available
- Test Mark: E1 90R-02C0165 / 1150
- Bore Diameter [mm]: 15,8
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0109-0133.1
- Manufacturer: ATE
- EAN number: 4006633031509
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year from: 04 / 2000
- for PR number: 1KE
- Fitting Position: Rear Axle
- Diameter [mm]: 239
- Brake Disc Type: solid
- Product line: PowerDisc
- Brake Disc Thickness [mm]: 8,9
- Height [mm]: 33,4
- Surface: Coated
- Centering Diameter [mm]: 65,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100,0
- Minimum thickness [mm]: 7,0
- Inner Diameter [mm]: 132,5
- MAPP code available
- Test Mark: E1 90R-02C0859 / 1217
- Bore Diameter [mm]: 15,8
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0309-0133.1
- Manufacturer: ATE
- EAN number: 4006633332026
- Condition: New
For vehicles without ABS, a PowerDisc can be used on the rea r axle only if there is one on the front axle. The General Operating Permit (ABE) for the PowerDisc applies to operation on German roads in accordance with the German Road Traffic Registration Ordinance (StVZO). Other countries may require additional type approvals for use on roads.
price incl. 19% VAT
excl. delivery costs
-
- Construction Year from: 04 / 2000
- for PR number: 1LR, 1LS, 1ZF, 1ZP, 1ZM
- Fitting Position: Front Axle
- Diameter [mm]: 280,0
- Brake Disc Type: Vented
- Product line: PowerDisc
- Brake Disc Thickness [mm]: 22,0
- Height [mm]: 36,7
- Surface: Coated
- Centering Diameter [mm]: 65,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100,0
- Minimum thickness [mm]: 19,0
- Inner Diameter [mm]: 133,5
- Machining: High-carbon
- MAPP code available
- Bore Diameter [mm]: 15,6
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0322-0150.1
- Manufacturer: ATE
- EAN number: 4006633066259
- Condition: New
For vehicles without ABS, a PowerDisc can be used on the rea r axle only if there is one on the front axle. The General Operating Permit (ABE) for the PowerDisc applies to operation on German roads in accordance with the German Road Traffic Registration Ordinance (StVZO). Other countries may require additional type approvals for use on roads.
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 239
- Brake Disc Type: solid
- Product line: COATED DISC LINE
- Brake Disc Thickness [mm]: 9
- Height [mm]: 33
- Surface: Coated
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 7
- Tightening Torque [Nm]: 120
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 08.9148.11
- Manufacturer: BREMBO
- EAN number: 8020584022818
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 239
- Brake Disc Type: solid, slotted
- Product line: MAX LINE
- Brake Disc Thickness [mm]: 9
- Height [mm]: 33
- Surface: Coated
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 7
- Tightening Torque [Nm]: 120
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 08.9148.75
- Manufacturer: BREMBO
- EAN number: 8020584014981
- Condition: New
For maximum performance in wet conditions, Brembo Max is the affordable grooved and painted disc for the enthusiast.
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 280
- Brake Disc Type: internally vented
- Product line: COATED DISC LINE
- Brake Disc Thickness [mm]: 22
- Height [mm]: 37
- Surface: Coated
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 19
- Tightening Torque [Nm]: 120
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 09.7012.11
- Manufacturer: BREMBO
- EAN number: 8020584018194
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 280
- Brake Disc Type: internally vented
- Brake Disc Thickness [mm]: 22
- Height [mm]: 37
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 19
- Tightening Torque [Nm]: 120
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 09.7012.14
- Manufacturer: BREMBO
- EAN number: 8020584013113
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 280
- Brake Disc Type: internally vented, slotted
- Product line: MAX LINE
- Brake Disc Thickness [mm]: 22
- Height [mm]: 37
- Surface: Coated
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 19
- Tightening Torque [Nm]: 120
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 09.7012.75
- Manufacturer: BREMBO
- EAN number: 8020584011447
- Condition: New
For maximum performance in wet conditions, Brembo Max is the affordable grooved and painted disc for the enthusiast.
price incl. 19% VAT
excl. delivery costs
-
- Construction Year from: 04 / 2000
- for PR number: 2EE, 2EL
- Fitting Position: Rear Axle
- Quantity Unit: Axle Set
- Brake System: Lucas / TRW
- Wear Warning Contact: excl. wear warning contact
- Thickness [mm]: 17,2
- Height [mm]: 52,9
- Width [mm]: 87,6
- Test Mark: E1 90R-02A0333 / 0192, E1 90R-02A0650 / 0200
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- MAPP code available
- Article number of recommended accessories: 13.0460-0072.2
- Number of bolts / screws: 4
- Observe dimensions
- Item number: 13.0460-2820.2
- Our price: 26,58 €
- Manufacturer: ATE
- EAN number: 4006633289542
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year from: 04 / 2000
- for PR number: 1LR, 1LS, 1ZF, 1ZP, 1ZM
- Fitting Position: Front Axle
- Quantity Unit: Axle Set
- Brake System: Volkswagen
- Wear Warning Contact: incl. wear warning contact
- Thickness [mm]: 19,6
- Height [mm]: 54,7
- Width [mm]: 146,0
- Test Mark: E1 90R-02A0335 / 0211
- Warning Contact Length [mm]: 145
- MAPP code available
- Item number: 13.0460-7117.2
- Our price: 34,44 €
- Manufacturer: ATE
- EAN number: 4006633071215
- Condition: New
-
- Construction Year from: 04 / 2000
- for PR number: 1KE
- Fitting Position: Rear Axle
- Quantity Unit: Axle Set
- Brake System: Lucas / TRW
- Wear Warning Contact: excl. wear warning contact
- Thickness [mm]: 17,2
- Product line: Ceramic
- Supplementary Article / Supplementary Info: with accessories
- Height [mm]: 52,9
- Width [mm]: 87,6
- Test Mark: E1 90R-02A0258 / 0193
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- MAPP code available
- Article number of recommended accessories: 13.0460-0072.2
- Number of bolts / screws: 4
- Observe dimensions
- Permissible up to vehicle capacity [kW]: 225
- Item number: 13.0470-2894.2
- Our price: 37,79 €
- Manufacturer: ATE
- EAN number: 4006633339629
- Condition: New
Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.
-
- Construction Year from: 04 / 2000
- for PR number: 1LR, 1LS, 1ZF, 1ZP, 1ZM
- Fitting Position: Front Axle
- Quantity Unit: Axle Set
- Brake System: Volkswagen
- Wear Warning Contact: incl. wear warning contact
- Thickness [mm]: 19,6
- Product line: Ceramic
- Height [mm]: 54,7
- Width [mm]: 146,0
- Test Mark: E1 90R-02A0258 / 0212
- Warning Contact Length [mm]: 145
- MAPP code available
- Permissible up to vehicle capacity [kW]: 225
- Item number: 13.0470-7117.2
- Our price: 46,74 €
- Manufacturer: ATE
- EAN number: 4006633339933
- Condition: New
Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.
-
- Construction Year from: 04 / 2000
- for PR number: 1LR, 1LS, 1ZF, 1ZP, 1ZM
- Fitting Position: Front Axle
- Diameter [mm]: 280,0
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22,0
- Height [mm]: 36,7
- Surface: Coated
- Centering Diameter [mm]: 65,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100,0
- Minimum thickness [mm]: 19,0
- Inner Diameter [mm]: 133,5
- Machining: High-carbon
- MAPP code available
- Test Mark: E1 90R-02C0118 / 0479
- Bore Diameter [mm]: 15,6
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0122-0150.1
- Manufacturer: ATE
- EAN number: 4006633298193
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year from: 04 / 2000
- for PR number: 2EE, 2EL
- Fitting Position: Rear Axle
- Diameter [mm]: 256
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22,0
- Height [mm]: 36,6
- Surface: Coated
- Centering Diameter [mm]: 65,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100,0
- Minimum thickness [mm]: 20,0
- Inner Diameter [mm]: 135,0
- Machining: High-carbon
- MAPP code available
- Test Mark: E1 90R-02C0118 / 0185
- Bore Diameter [mm]: 15,6
- Drilled: no
- Item number: 24.0122-0163.1
- Manufacturer: ATE
- EAN number: 4006633069229
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year from: 04 / 2000
- for PR number: 2EE, 2EL
- Fitting Position: Rear Axle
- Diameter [mm]: 256
- Brake Disc Type: Vented
- Product line: PowerDisc
- Brake Disc Thickness [mm]: 22,0
- Height [mm]: 36,6
- Surface: Coated
- Centering Diameter [mm]: 65,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100,0
- Minimum thickness [mm]: 20,0
- Inner Diameter [mm]: 135,0
- Machining: High-carbon
- MAPP code available
- Bore Diameter [mm]: 15,6
- Drilled: no
- Item number: 24.0322-0163.1
- Manufacturer: ATE
- EAN number: 4006633332033
- Condition: New
For vehicles without ABS, a PowerDisc can be used on the rea r axle only if there is one on the front axle. The General Operating Permit (ABE) for the PowerDisc applies to operation on German roads in accordance with the German Road Traffic Registration Ordinance (StVZO). Other countries may require additional type approvals for use on roads.
price incl. 19% VAT
excl. delivery costs