Vehicle identification number: 3001525
Citroen Jumper Platform 2.5 D Camshaft sensor (86 hp Diesel T9A (DJ5))
- Number of connectors: 3
- Height [mm]: 22
- Sensor Type: Hall Sensor
- Item number: CS0353
- Our price: 19,24 €
- Manufacturer: CALORSTAT by Vernet
- EAN number: 3531650039647
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Number of connectors: 2
- Height [mm]: 28
- Resistor [Ohm]: 500
- Item number: CS0214
- Our price: 27,55 €
- Manufacturer: CALORSTAT by Vernet
- EAN number: 3531650038312
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Number of pins: 3
- Cable Length [mm]: 545
- Product line: Q+, original equipment manufacturer quality
- Number of connectors: 3
- Vehicle Equipment: for vehicles with electronic rev counter
- Length [mm]: 615
- Colour: white
- Sensor Type: Inductive Sensor
- Required quantity: 1
- Resistor [Ohm]: 110
- Rated Voltage [V]: 12
- Fitting Depth [mm]: 38
- Weight [kg]: 0,085
- Packaging width [cm]: 4,9, 2,3
- Packaging height [cm]: 5, 9,2
- Packaging Depth [cm]: 9, 63,5
- Item number: V22-72-0017
- Our price: 35,77 €
- Manufacturer: VEMO
- EAN number: 4046001362866
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. the designated use. Please note that our products are usually delivered without Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use. unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Vehicle Equipment: for vehicles without electronic rev counter
- Resistor [Ohm]: 70
- Cable Length [mm]: 530
- Sensor Type: Inductive Sensor
- Number of pins: 3
- Number of connectors: 3
- Rated Voltage [V]: 12
- Fitting Depth [mm]: 39
- Housing Colour: brown
- Corresponds to the original part in colour: brown
- Weight [kg]: 0,076
- Product line: Q+, original equipment manufacturer quality
- Packaging width [cm]: 4,9, 5
- Packaging height [cm]: 2,5, 9,2
- Packaging Depth [cm]: 9, 61,5
- Item number: V42-72-0035
- Our price: 19,82 €
- Manufacturer: VEMO
- EAN number: 4046001434112
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. the designated use. Please note that our products are usually delivered without Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use. unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Resistor [Ohm]: 70
- Fitting Depth [mm]: 39
- Instruments: without revcounter
- Length [mm]: 600
- Specification: CALAGE POMPE IE
- Item number: CP67
- Our price: 50,78 €
- Manufacturer: SEIM
- EAN number: 3349808006171
- Condition: New
-
- Fitting Position: Front Axle
- Construction Year to: 08 / 2001
- Payload from [kg]: 1000
- Payload to [kg]: 1400
- Diameter [mm]: 280
- Brake Disc Type: solid
- Product line: PREMIER
- Brake Disc Thickness [mm]: 18
- Height [mm]: 65,5
- Surface: Oiled
- Centering Diameter [mm]: 73
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 118
- Minimum thickness [mm]: 15,9
- Weight [kg]: 15,85
- Tightening Torque [Nm]: 160
- Test Mark: R90 homologated
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Packing Type: Box
- Packaging length [cm]: 27
- Packaging width [cm]: 27
- Packaging height [cm]: 14,3
- Drilled: no
- Item number: DDF758
- Manufacturer: FERODO
- EAN number: 5016687175899
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Rear Axle
- Construction Year from: 09 / 2001
- Payload from [kg]: 1000
- Payload to [kg]: 1400
- Braking / Drive Dynamics: for vehicles with ABS
- Diameter [mm]: 280
- Brake Disc Type: solid
- Product line: PREMIER
- Brake Disc Thickness [mm]: 16
- Height [mm]: 82
- Surface: Oiled
- Centering Diameter [mm]: 72
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 118
- Minimum thickness [mm]: 14,2
- Weight [kg]: 15,18
- Tightening Torque [Nm]: 160
- Test Mark: R90 homologated
- Supplementary Article / Supplementary Info Info 2: without bolts / screws
- Packing Type: Box
- Packaging length [cm]: 28,5
- Packaging width [cm]: 28,5
- Packaging height [cm]: 17,7
- Drilled: no
- Item number: DDF1144
- Manufacturer: FERODO
- EAN number: 5016687307696
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Rear Axle
- Construction Year from: 09 / 2001
- Payload [kg]: 1800
- Braking / Drive Dynamics: for vehicles with ABS
- Diameter [mm]: 280
- Brake Disc Type: solid
- Product line: PREMIER
- Brake Disc Thickness [mm]: 16
- Height [mm]: 82
- Surface: Oiled
- Centering Diameter [mm]: 79
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 130
- Minimum thickness [mm]: 14,2
- Weight [kg]: 15,46
- Tightening Torque [Nm]: 170
- Test Mark: R90 homologated
- Supplementary Article / Supplementary Info Info 2: without bolts / screws
- Packing Type: Box
- Packaging length [cm]: 28,5
- Packaging width [cm]: 28,5
- Packaging height [cm]: 17,7
- Drilled: no
- Item number: DDF1145
- Manufacturer: FERODO
- EAN number: 5016687307795
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle
- Construction Year from: 09 / 2001
- Payload from [kg]: 1000
- Payload to [kg]: 1400
- Diameter [mm]: 280
- Brake Disc Type: Vented
- Product line: PREMIER
- Brake Disc Thickness [mm]: 24
- Height [mm]: 66
- Surface: Oiled
- Centering Diameter [mm]: 73
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 118
- Minimum thickness [mm]: 22
- Weight [kg]: 14,41
- Test Mark: R90 homologated
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Packing Type: Box
- Packaging length [cm]: 32
- Packaging width [cm]: 32
- Packaging height [cm]: 14
- Drilled: no
- Item number: DDF1170
- Manufacturer: FERODO
- EAN number: 5016687310399
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year to: 03 / 2002
- Vehicle type: 35
- Axle Load [t]: 1,8
- Diameter [mm]: 300
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 24
- Fitting Position: Front Axle
- Height [mm]: 65,5
- Centering Diameter [mm]: 80
- Number of Holes: 5
- Thickness [mm]: 24
- Minimum thickness [mm]: 21,9
- Wear Warning Contact: incl. wear warning contact, with integrated wear warning contact
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: C3F024ABE
- Manufacturer: ABE
- EAN number: 5900427199637
- Condition: New
-
- Construction Year from: 11 / 2001
- Construction Year to: 03 / 2002
- Payload [kg]: 1400
- Diameter [mm]: 280
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 16
- Fitting Position: Rear Axle
- Height [mm]: 80
- Centering Diameter [mm]: 72
- Number of Holes: 5
- Minimum thickness [mm]: 14,2
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: C4C012ABE
- Manufacturer: ABE
- EAN number: 00542
- Condition: New
-
- Construction Year from: 11 / 2001
- Construction Year to: 03 / 2002
- Payload [kg]: 1800
- Diameter [mm]: 280
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 16,0
- Fitting Position: Rear Axle
- Height [mm]: 82
- Centering Diameter [mm]: 79
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 130
- Minimum thickness [mm]: 14,2
- Inner Diameter [mm]: 172
- Bore Diameter [mm]: 17,5
- Drilled: no
- Item number: C4F003ABE
- Manufacturer: ABE
- EAN number: 5900427205437
- Condition: New
- Diameter [mm]: 280
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 24
- Fitting Position: Front Axle
- Height [mm]: 65,8
- Surface: Oiled
- Centering Diameter [mm]: 73
- Number of Holes: 5
- Minimum thickness [mm]: 21,9
- Test Mark: E1 90R-02C0339 / 1625
- Drilled: no
- Item number: BG3841
- Manufacturer: DELPHI
- EAN number: 5012759308608
- Condition: New
price incl. 19% VAT
- Diameter [mm]: 280
- Brake Disc Type: Vented
- Product line: PREMIER
- Brake Disc Thickness [mm]: 24
- Fitting Position: Front Axle
- Height [mm]: 67,5
- Surface: Oiled
- Centering Diameter [mm]: 73
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 118
- Minimum thickness [mm]: 21,9
- Weight [kg]: 15,05
- Tightening Torque [Nm]: 100
- Supplementary Article / Supplementary Info Info 2: without bolts / screws
- Packing Type: Box
- Packaging length [cm]: 27
- Packaging width [cm]: 27
- Packaging height [cm]: 14
- Drilled: no
- Item number: DDF1809
- Manufacturer: FERODO
- EAN number: 4044197515875
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Payload [kg]: 1800
- Construction Year from: 11 / 2001
- Construction Year to: 03 / 2002
- Diameter [mm]: 280
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 16
- Fitting Position: Rear Axle
- Height [mm]: 82
- Centering Diameter [mm]: 79
- Number of Holes: 5
- Required quantity: 2
- Drilled: no
- Item number: 25038
- Manufacturer: MAPCO
- EAN number: 4043605420312
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year to: 03 / 2002
- Vehicle type: 27 - 31
- Diameter [mm]: 280
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 24
- Fitting Position: Front Axle
- Height [mm]: 65,5
- Surface: Coated
- Centering Diameter [mm]: 73
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 118
- Thickness [mm]: 24
- Minimum thickness [mm]: 21,9
- Inner Diameter [mm]: 142
- Tightening Torque [Nm]: 160
- Colour: black
- Wear Warning Contact: incl. wear warning contact, with integrated wear warning contact
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- fulfils ECE norm: ECE-R90
- Drilled: no
- Item number: C3P017ABE
- Manufacturer: ABE
- EAN number: 5900427200968
- Condition: New
-
- Fitting Position: Rear Axle
- Braking / Drive Dynamics: for vehicles with ABS
- Diameter [mm]: 280
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 16
- Height [mm]: 82
- Surface: Oiled
- Centering Diameter [mm]: 72
- Number of Holes: 5
- Minimum thickness [mm]: 14,2
- Test Mark: E1 90R-02C0241 / 1626
- Drilled: no
- Item number: BG3853
- Manufacturer: DELPHI
- EAN number: 5012759308721
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Rear Axle
- Braking / Drive Dynamics: for vehicles with ABS
- for model code: Jumper 35
- Diameter [mm]: 280
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 16
- Height [mm]: 82,2
- Surface: Oiled
- Centering Diameter [mm]: 79
- Number of Holes: 5
- Minimum thickness [mm]: 14,2
- Test Mark: E1 90R-02C0967 / 2518
- Drilled: no
- Item number: BG3923
- Manufacturer: DELPHI
- EAN number: 5012759355114
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle
- Construction Year to: 01 / 2000
- for model code: 1.0 Tonne, 1.4 Tonne
- Diameter [mm]: 280
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 18
- Height [mm]: 66,5
- Surface: Oiled
- Centering Diameter [mm]: 73
- Number of Holes: 5
- Minimum thickness [mm]: 15,9
- Test Mark: E1 90R-02C0100 / 1601
- Drilled: no
- Item number: BG2845
- Manufacturer: DELPHI
- EAN number: 5012759960370
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle
- Construction Year to: 01 / 2000
- Vehicle type: Jumper 35, Relay 1800
- Diameter [mm]: 280
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 24
- Height [mm]: 65,5
- Surface: Oiled
- Centering Diameter [mm]: 73
- Number of Holes: 5
- Minimum thickness [mm]: 22
- Test Mark: E1 90R-02C0957 / 2551
- Drilled: no
- Item number: BG2846
- Manufacturer: DELPHI
- EAN number: 5012759960387
- Condition: New
price incl. 19% VAT
excl. delivery costs