Vehicle identification number: 0035072
Opel Vectra C Saloon 2.0 DTI 16V Cable, manual transmission (101 hp Diesel Y 20 DTH)
-
- Transmission Code: M32
- Transmission Type: 6-Speed Manual Transmission
- Length [mm]: 1229 / 909, 1146 / 879
- Parameter: DOUBLE
- Item number: 8140 24709
- Our price: 115,49 €
- Manufacturer: TRISCAN
- EAN number: 5710476407061
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Brake System: ATE
- Quantity Unit: Axle Set
- Height: 69,3
- Width [mm]: 155,1
- Test Mark: ECE R-90
- Brake Disc Thickness: 20,1
- Production Number: 6001720
- Item number: 6001720
- Our price: 24,49 €
- Manufacturer: KRAFT
- EAN number: 5900427191037
- Condition: New
- Fitting Position: Rear Axle
- Quantity Unit: Axle Set
- Height: 51,9
- Width [mm]: 123,0
- Test Mark: ECE R-90
- Brake Disc Thickness: 15,8
- Production Number: 6015105
- Item number: 6015105
- Our price: 21,99 €
- Manufacturer: KRAFT
- EAN number: 5900427194465
- Condition: New
- Fitting Position: Rear Axle
- Diameter: 278
- Brake Disc Type: solid
- Drilled: no
- Brake Disc Thickness: 12
- Height: 41,5
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 110
- Minimum thickness [mm]: 10
- Item number: BDC5413
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593840751
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Brake System: ATE
- Vehicle Identification Number (VIN) from: 41096249 / 48091179
- Wear Warning Contact: not prepared for wear warning indicator, excl. wear warning contact
- Thickness [mm]: 16,6
- Quantity Unit: Axle Set
- Height: 52,0
- Width [mm]: 123,0
- Test Mark: E9 90R-02A1382 / 2272
- MAPP code available
- Observe mounting information
- Item number: 13.0460-7195.2
- Our price: 36,99 €
- Manufacturer: ATE
- EAN number: 4006633149839
- Condition: New
Replaces brake pad with springs with retroactive effect. See item picture for further information.
- Fitting Position: Front Axle
- Brake System: ATE
- Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact
- Brake Caliper Type: for brake caliper with plastic piston
- Thickness [mm]: 20,1
- Product line: Ceramic
- Quantity Unit: Axle Set
- Height 1 [mm]: 69,6
- Height 2 [mm]: 70,7
- Width 2 [mm]: 156,3
- Width 1 [mm]: 155,1
- Test Mark: E9 90R-02A1242 / 4466
- MAPP code available
- Article number of recommended accessories: 24.8190-0719.2, 24.8190-0720.2
- Observe dimensions
- Permissible up to vehicle capacity [kW]: 225
- Item number: 13.0470-7172.2
- Our price: 59,49 €
- Manufacturer: ATE
- EAN number: 4006633374835
- Condition: New
Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.
- Fitting Position: Rear Axle
- Brake System: ATE
- Vehicle Identification Number (VIN) to: 41096248 / 48091178
- Wear Warning Contact: not prepared for wear warning indicator, excl. wear warning contact
- Thickness [mm]: 16,6
- Product line: Ceramic
- Quantity Unit: Axle Set
- Height: 52,0
- Width [mm]: 123,0
- Test Mark: E9 90R-02A1242 / 4463
- MAPP code available
- Observe mounting information
- Permissible up to vehicle capacity [kW]: 225
- Item number: 13.0470-7194.2
- Our price: 44,49 €
- Manufacturer: ATE
- EAN number: 4006633374385
- Condition: New
Technically it is possible to combine ATE Ceramic brake pads Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones. s, i.e. smooth ones.
- Fitting Position: Rear Axle
- Brake System: ATE
- Vehicle Identification Number (VIN) from: 41096249 / 48091179
- Wear Warning Contact: not prepared for wear warning indicator, excl. wear warning contact
- Thickness [mm]: 16,6
- Product line: Ceramic
- Quantity Unit: Axle Set
- Height: 52,0
- Width [mm]: 123,0
- Test Mark: E9 90R-02A1242 / 2272
- MAPP code available
- Observe mounting information
- Permissible up to vehicle capacity [kW]: 225
- Item number: 13.0470-7195.2
- Our price: 50,49 €
- Manufacturer: ATE
- EAN number: 4006633347020
- Condition: New
Technically it is possible to combine ATE Ceramic brake pads Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones. s, i.e. smooth ones.
- Fitting Position: Rear Axle
- Diameter: 278,0
- Brake Disc Type: solid
- Drilled: no
- Surface: Coated
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Brake Disc Thickness: 11,9
- Height: 41,4
- Centering Diameter [mm]: 65,5
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 110,0
- Minimum thickness [mm]: 10,0
- Inner Diameter [mm]: 145,2
- MAPP code available
- Test Mark: E1 90R-02C0165 / 0532
- Bore Diameter [mm]: 14,0
- Item number: 24.0112-0157.1
- Manufacturer: ATE
- EAN number: 4006633105828
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter: 285,0
- Brake Disc Type: Vented
- Drilled: no
- Surface: Coated
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Brake Disc Thickness: 24,9
- Height: 42,1
- Centering Diameter [mm]: 70,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 110,0
- Minimum thickness [mm]: 22,0
- Inner Diameter [mm]: 139,0
- MAPP code available
- No. of holes 2: 7
- Test Mark: E1 90R-02C0115 / 0436
- Bore Diameter [mm]: 14,0
- Item number: 24.0125-0141.1
- Manufacturer: ATE
- EAN number: 4006633105927
- Condition: New
price incl. 19% VAT
- Fitting Position: Rear Axle
- Diameter: 292,0
- Brake Disc Type: Vented
- Drilled: no
- Surface: Coated
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Product line: PowerDisc
- Brake Disc Thickness: 19,9
- Height: 41,4
- Centering Diameter [mm]: 65,5
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 110,0
- Minimum thickness [mm]: 18,0
- Inner Diameter [mm]: 162,5
- MAPP code available
- Bore Diameter [mm]: 14,0
- Item number: 24.0320-0173.1
- Manufacturer: ATE
- EAN number: 4006633147538
- Condition: New
For vehicles without ABS, a PowerDisc can be used on the rea r axle only if there is one on the front axle. The General Operating Permit (ABE) for the PowerDisc applies to operation on German roads in accordance with the German Road Traffic Registration Ordinance (StVZO). Other countries may require additional type approvals for use on roads.
price incl. 19% VAT
- Fitting Position: Front Axle
- Diameter: 285,0
- Brake Disc Type: Vented
- Drilled: no
- Surface: Coated
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Product line: PowerDisc
- Brake Disc Thickness: 24,9
- Height: 42,1
- Centering Diameter [mm]: 70,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 110,0
- Minimum thickness [mm]: 22,0
- Inner Diameter [mm]: 139,0
- MAPP code available
- Test Mark: E1 90R-02C0858 / 1210
- Bore Diameter [mm]: 14,0
- Item number: 24.0325-0141.1
- Manufacturer: ATE
- EAN number: 4006633120371
- Condition: New
For vehicles without ABS, a PowerDisc can be used on the rea r axle only if there is one on the front axle. The General Operating Permit (ABE) for the PowerDisc applies to operation on German roads in accordance with the German Road Traffic Registration Ordinance (StVZO). Other countries may require additional type approvals for use on roads.
price incl. 19% VAT
- Fitting Position: Front Axle
- Diameter: 285
- Brake Disc Type: Vented
- Drilled: no
- Brake Disc Thickness: 25
- Height: 42
- Centering Diameter [mm]: 70
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 110
- Minimum thickness [mm]: 22
- Item number: BDC5412
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593840744
- Condition: New
price incl. 19% VAT
- Fitting Position: Front Axle
- Brake System: ATE
- Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact
- Brake Caliper Type: for brake caliper with plastic piston
- Thickness [mm]: 20,1
- Quantity Unit: Axle Set
- Height 1 [mm]: 69,6
- Height 2 [mm]: 70,7
- Width 2 [mm]: 156,3
- Width 1 [mm]: 155,1
- Test Mark: E9 90R-02A1259 / 4467
- MAPP code available
- Article number of recommended accessories: 24.8190-0719.2, 24.8190-0720.2
- Observe dimensions
- Item number: 13.0460-7172.2
- Our price: 44,99 €
- Manufacturer: ATE
- EAN number: 4006633105095
- Condition: New
- Fitting Position: Rear Axle
- Brake System: ATE
- Vehicle Identification Number (VIN) to: 41096248 / 48091178
- Wear Warning Contact: not prepared for wear warning indicator, excl. wear warning contact
- Thickness [mm]: 16,6
- Quantity Unit: Axle Set
- Height: 52,0
- Width [mm]: 123,0
- Test Mark: E9 90R-02A1258 / 4462
- MAPP code available
- Observe mounting information
- Item number: 13.0460-7194.2
- Our price: 32,99 €
- Manufacturer: ATE
- EAN number: 4006633127691
- Condition: New
Replaces brake pad with springs with retroactive effect. See item picture for further information.
- Fitting Position: Front Axle
- Brake System: ATE
- Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact
- Brake Caliper Type: for brake calipers with steel pistons
- Thickness [mm]: 20,1
- Quantity Unit: Axle Set
- Height 1 [mm]: 69,6
- Height 2 [mm]: 70,7
- Width 2 [mm]: 156,3
- Width 1 [mm]: 155,1
- Test Mark: E9 90R-02A1259 / 4467
- MAPP code available
- Item number: 13.0460-7212.2
- Our price: 45,49 €
- Manufacturer: ATE
- EAN number: 4006633274289
- Condition: New
- Fitting Position: Rear Axle
- Diameter: 292,0
- Brake Disc Type: Vented
- Drilled: no
- Surface: Coated
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Brake Disc Thickness: 19,9
- Height: 41,4
- Centering Diameter [mm]: 65,5
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 110,0
- Minimum thickness [mm]: 18,0
- Inner Diameter [mm]: 162,5
- MAPP code available
- Bore Diameter [mm]: 14,0
- Item number: 24.0120-0173.1
- Manufacturer: ATE
- EAN number: 4006633105842
- Condition: New
price incl. 19% VAT
- Fitting Position: Rear Axle
- Diameter: 278,0
- Brake Disc Type: solid
- Drilled: no
- Surface: Coated
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Product line: PowerDisc
- Brake Disc Thickness: 11,9
- Height: 41,4
- Centering Diameter [mm]: 65,5
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 110,0
- Minimum thickness [mm]: 10,0
- Inner Diameter [mm]: 145,2
- MAPP code available
- Bore Diameter [mm]: 14,0
- Item number: 24.0312-0157.1
- Manufacturer: ATE
- EAN number: 4006633147491
- Condition: New
For vehicles without ABS, a PowerDisc can be used on the rea r axle only if there is one on the front axle. The General Operating Permit (ABE) for the PowerDisc applies to operation on German roads in accordance with the German Road Traffic Registration Ordinance (StVZO). Other countries may require additional type approvals for use on roads.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Brake System: ATE
- Vehicle Identification Number (VIN) from: 41096249, 48091179
- Vehicle Identification Number (VIN) to: 41096248, 48091178
- Wear Warning Contact: without integrated wear sensor
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate
- for brake disc diameter [mm]: 278
- Thickness [mm]: 16,4
- Quantity Unit: Axle Set
- Height: 51,9
- Width [mm]: 123
- WVA Number: 24137, 24136, 23482
- Test Mark: ECE-R90
- Weight [kg]: 1,015
- FMSI Code: D1095-7874
- Item number: 598783
- Our price: 31,49 €
- Manufacturer: VALEO
- EAN number: 3276425987838
- Condition: New
1923-2023: 100 years of braking
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter: 278
- Construction Year to: 09 / 2005
- Brake Disc Type: solid
- Drilled: no
- Surface: Oiled
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Brake Disc Thickness: 12
- Height: 41,5
- Centering Diameter [mm]: 65,5
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 110
- Minimum thickness [mm]: 10
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 14,3
- Item number: 0 986 479 106
- Manufacturer: BOSCH
- EAN number: 4047024093560
- Condition: New
price incl. 19% VAT
excl. delivery costs