Vehicle identification number: 0600561
VW Passat B2 Saloon (32B) 1.6 D Brake drum (54 hp Diesel JK)
Recommended part replacement interval for your car for the part category Brake drum: every 100.000 km
- Fitting Position: Rear Axle
- Supplementary Info: Original VAICO Quality
- Drum diameter [mm]: 180,0
- Outer brake drum diameter [mm]: 212
- Inner brake drum height [mm]: 38,5
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Total brake drum height [mm]: 74,5
- max. brake drum reboring dimension [mm]: 181
- Supplementary Article / Supplementary Info Info 2: without wheel bearing
- Weight [kg]: 5,06
- Support plate diameter [mm]: 50,3
- Thread Size: M 12x1,5
- Inner Diameter 2 [mm]: 39,9
- Packaging width [cm]: 24
- Packaging height [cm]: 7
- Packaging Depth [cm]: 24
- Item number: V10-60009
- Manufacturer: VAICO
- EAN number: 4046001377921
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
-
- Transmission Type: Manual Transmission
- Braking System: not for vehicles with reinforced brakes
- Diameter [mm]: 212
- Inner brake drum diameter [mm]: 180
- Rim Hole Number: 4
- Bolt Hole Circle Ø [mm]: 100
- Thickness [mm]: 75
- Width [mm]: 30
- for OE number: 191 501 615 B
- Item number: 02123
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816021230
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Supplementary Info: Original VAICO Quality
- Drum diameter [mm]: 200,0
- Outer brake drum diameter [mm]: 240
- Inner brake drum height [mm]: 50,5
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Total brake drum height [mm]: 81
- max. brake drum reboring dimension [mm]: 201,5
- Supplementary Article / Supplementary Info Info 2: without ABS sensor ring, without wheel bearing
- Weight [kg]: 8,57
- Support plate diameter [mm]: 50,3
- Thread Size: M 12x1,5
- Inner Diameter 2 [mm]: 39,9
- Packaging width [cm]: 28
- Packaging height [cm]: 8
- Packaging Depth [cm]: 28
- Item number: V10-60008
- Manufacturer: VAICO
- EAN number: 4046001377754
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Rear Axle
-
- Transmission Type: Manual Transmission
- Braking System: not for vehicles with reinforced brakes
- Diameter [mm]: 211,5
- Inner brake drum diameter [mm]: 180
- Rim Hole Number: 4
- Bolt Hole Circle Ø [mm]: 100
- Thickness [mm]: 74,5
- Width [mm]: 30
- Item number: 32 90 2123
- Manufacturer: SWAG
- EAN number: 4044688522320
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Outer brake drum diameter [mm]: 211
- Inner brake drum diameter [mm]: 180
- Inner brake drum height [mm]: 39
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Total brake drum height [mm]: 74,5
- Supplementary Article / Supplementary Info Info 2: without wheel bearing
- Centering Diameter [mm]: 50,2
- Item number: 0 986 477 002
- Manufacturer: BOSCH
- EAN number: 3165141021394
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Outer brake drum diameter [mm]: 240
- Inner brake drum height [mm]: 50
- Bolt Hole Circle Ø [mm]: 100
- Total brake drum height [mm]: 81
- max. brake drum reboring dimension [mm]: 201
- Supplementary Article / Supplementary Info Info 2: with wheel hub, without wheel bearing, without wheel studs
- Centering Diameter [mm]: 39,8
- Technical Information Number: 98100 0067 0 1
- Packaging length [cm]: 26,3
- Packaging width [cm]: 25,9
- Packaging height [cm]: 11,1
- Item number: 19-0823
- Manufacturer: MAXGEAR
- EAN number: 5907558539745
- Condition: New
- Fitting Position: Rear Axle
- Inner brake drum diameter [mm]: 200
- Rim Hole Number: 4
- Bolt Hole Circle Ø [mm]: 100
- Supplementary Article / Supplementary Info Info 2: without wheel bearing
- Braking System: for vehicles with reinforced brakes
- Thickness [mm]: 40
- for OE number: 1H0 501 615 A
- Item number: 14060
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816140603
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
-
- Transmission Type: Manual Transmission
- Braking System: not for vehicles with reinforced brakes
- Outer brake drum diameter [mm]: 211,5
- Inner brake drum diameter [mm]: 180,0
- Inner brake drum height [mm]: 38,5
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100,0
- Total brake drum height [mm]: 74,6
- max. brake drum reboring dimension [mm]: 181,0
- Supplementary Article / Supplementary Info Info 2: without wheel bearing
- Support plate diameter [mm]: 50,3
- MAPP code available
- Thread Size: M12x1,5
- Inner Diameter 2 [mm]: 39,9
- Test Mark: E1 90R-02D0955 / 0093
- Item number: 24.0218-0007.1
- Manufacturer: ATE
- EAN number: 4006633057219
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Outer brake drum diameter [mm]: 239,3
- Inner brake drum diameter [mm]: 200
- Inner brake drum height [mm]: 49
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Total brake drum height [mm]: 81,5
- Centering Diameter [mm]: 50,2
- Brake Size: 200x400
- Item number: 0 986 477 041
- Manufacturer: BOSCH
- EAN number: 3165141984446
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
-
- Transmission Type: Automatic Transmission, Manual Transmission
- Braking System: for vehicles with reinforced brakes
- Outer brake drum diameter [mm]: 240,0
- Inner brake drum height [mm]: 50,0
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100,0
- Total brake drum height [mm]: 81,3
- max. brake drum reboring dimension [mm]: 201,0
- Supplementary Article / Supplementary Info Info 2: without wheel bearing
- Support plate diameter [mm]: 50,3
- MAPP code available
- Thread Size: M12x1,5
- Inner Diameter 2 [mm]: 39,9
- Test Mark: E1 90R-02D0955 / 0094
- Item number: 24.0220-0018.1
- Manufacturer: ATE
- EAN number: 4006633142380
- Condition: New
price incl. 19% VAT
excl. delivery costs
Sample photo only
- Fitting Position: Rear Axle
-
- Transmission Type: Manual Transmission
- Braking System: not for vehicles with reinforced brakes
- Outer brake drum diameter [mm]: 212
- Inner brake drum diameter [mm]: 180
- Inner brake drum height [mm]: 39
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Total brake drum height [mm]: 75
- max. brake drum reboring dimension [mm]: 181,0
- Supplementary Article / Supplementary Info Info 2: with wheel bearing
- Support plate diameter [mm]: 50,3
- MAPP code available
- Inner Diameter 2 [mm]: 39,9
- Item number: 19-3724
- Manufacturer: MAXGEAR
- EAN number: 5903766392967
- Condition: New
- Fitting Position: Rear Axle
-
- Transmission Type: Manual Transmission
- Braking System: not for vehicles with reinforced brakes
- Outer brake drum diameter [mm]: 211,5
- Inner brake drum diameter [mm]: 180,0
- Inner brake drum height [mm]: 38,5
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100,0
- Total brake drum height [mm]: 74,6
- max. brake drum reboring dimension [mm]: 181,0
- Supplementary Article / Supplementary Info Info 2: with wheel bearing
- Support plate diameter [mm]: 50,3
- MAPP code available
- Thread Size: M12x1,5
- Inner Diameter 2 [mm]: 39,9
- Test Mark: E1 90R-02D0955 / 0093
- Item number: 24.0218-0707.2
- Manufacturer: ATE
- EAN number: 4006633307079
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Inner brake drum diameter [mm]: 200
- Rim Hole Number: 4
- Bolt Hole Circle Ø [mm]: 100
- Supplementary Article / Supplementary Info Info 2: without wheel bearing
- Weight [kg]: 8,7
- Braking System: for vehicles with reinforced brakes
- Thickness [mm]: 40
- Item number: 30 91 4060
- Manufacturer: SWAG
- EAN number: 4044688524898
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
-
- Transmission Type: Automatic Transmission, Manual Transmission
- Braking System: for vehicles with reinforced brakes
- Outer brake drum diameter [mm]: 240,0
- Inner brake drum diameter [mm]: 200,0
- Inner brake drum height [mm]: 50,0
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100,0
- Total brake drum height [mm]: 81,3
- max. brake drum reboring dimension [mm]: 201,0
- Supplementary Article / Supplementary Info Info 2: with wheel bearing, without ABS sensor ring
- Support plate diameter [mm]: 50,3
- MAPP code available
- Thread Size: M12x1,5
- Inner Diameter 2 [mm]: 39,9
- Test Mark: E1 90R-02D0955 / 0094
- Item number: 24.0220-0718.2
- Manufacturer: ATE
- EAN number: 4006633307178
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
-
- Required quantity: 2
- Brake Type: Drum Brake
- Outer brake drum diameter [mm]: 180
- Diameter [mm]: 211
- Number of Holes: 4
- Supplementary Article / Supplementary Info Info 2: with integrated wheel bearing
- Width [mm]: 74,5
- Inner Diameter [mm]: 180
- Item number: VKBD 0148
- Manufacturer: SKF
- EAN number: 7316571837949
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Outer brake drum diameter [mm]: 211
- Inner brake drum diameter [mm]: 180
- Inner brake drum height [mm]: 38
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Total brake drum height [mm]: 74,5
- Supplementary Article / Supplementary Info Info 2: with wheel bearing
- Centering Diameter [mm]: 50,2
- Item number: 0 986 477 111
- Manufacturer: BOSCH
- EAN number: 3165143934920
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Outer brake drum diameter [mm]: 240
- Inner brake drum diameter [mm]: 200
- Inner brake drum height [mm]: 49
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Total brake drum height [mm]: 81
- Supplementary Article / Supplementary Info Info 2: with wheel bearing
- Centering Diameter [mm]: 50,2
- Brake Size: 200x400
- Item number: 0 986 477 267
- Manufacturer: BOSCH
- EAN number: 4047025359238
- Condition: New
price incl. 19% VAT
- Fitting Position: Rear Axle
- Outer brake drum diameter [mm]: 211,6
- Inner brake drum diameter [mm]: 180
- Inner brake drum height [mm]: 38,6
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Total brake drum height [mm]: 74,6
- max. brake drum reboring dimension [mm]: 181
- Centering Diameter [mm]: 39,8
- Surface: Painted
- Item number: TA-0901C
- Manufacturer: JAPANPARTS
- EAN number: 8052553581408
- Condition: New
- Fitting Position: Rear Axle
-
- Transmission Type: Manual Transmission
- Braking System: not for vehicles with reinforced brakes
- Drum diameter [mm]: 180
- Outer brake drum diameter [mm]: 212
- Inner brake drum height [mm]: 38,5
- Number of Holes: 4
- Total brake drum height [mm]: 74,5
- max. brake drum reboring dimension [mm]: 181
- Support plate diameter [mm]: 50
- Inner Diameter 2 [mm]: 39,9
- Item number: PB 6055
- Manufacturer: STARLINE
- EAN number: 221136211839344118393
- Condition: New
- Fitting Position: Rear Axle
-
- Transmission Type: Automatic Transmission, Manual Transmission
- Braking System: for vehicles with reinforced brakes
- Drum diameter [mm]: 200
- Inner brake drum height [mm]: 51
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Net weight [kg]: 5,40
- Gross Weight [kg]: 5,62
- Item number: 24022000181-PCS-MS
- Manufacturer: MASTER-SPORT
- EAN number: 4250083135328
- Condition: New
price incl. 19% VAT
excl. delivery costs
- 1
- 2
- 3