VAUXHALL Corsavan Mk2 (C) (X01) 1.2 16V Brake drum (80 hp Petrol Z 12 XEP)
- Fitting Position: Rear Axle
-
- Braking / Drive Dynamics: for vehicles without ABS
- Diameter [mm]: 200
- Outer brake drum diameter [mm]: 200, 228,0
- Inner brake drum height [mm]: 35
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Total brake drum height [mm]: 86
- max. brake drum reboring dimension [mm]: 201, 202
- Supplementary Article / Supplementary Info Info 2: with wheel hub, without wheel bearing, without ABS sensor ring
- Thread Size: M12x1,5
- Fitted Diameter1 / Fitted Diameter2 [mm]: 50-52.9
- Item number: 123B0101
- Manufacturer: RIDEX
- EAN number: 4059191421442
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Supplementary Info: Original VAICO Quality
- Drum diameter [mm]: 230,0
- Outer brake drum diameter [mm]: 265
- Inner brake drum height [mm]: 50
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Total brake drum height [mm]: 65
- max. brake drum reboring dimension [mm]: 231
- Support plate diameter [mm]: 57
- Bore Diameter [mm]: 14,5
- Item number: V40-60001
- Manufacturer: VAICO
- EAN number: 4046001479670
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Rear Axle
- Drum diameter [mm]: 203
- Outer brake drum diameter [mm]: 249,5
- Inner brake drum height [mm]: 45
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Total brake drum height [mm]: 61
- max. brake drum reboring dimension [mm]: 204,7
- Support plate diameter [mm]: 60
- Bore Diameter [mm]: 14
- Number of Doors: 3
- Item number: V40-60003
- Manufacturer: VAICO
- EAN number: 4062375161119
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Rear Axle
- Outer brake drum diameter [mm]: 228
- Inner brake drum diameter [mm]: 200
- Inner brake drum height [mm]: 35
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Total brake drum height [mm]: 86
- max. brake drum reboring dimension [mm]: 201
- Supplementary Article / Supplementary Info Info 2: with wheel hub, without wheel bearing, without wheel studs
- Braking / Drive Dynamics: for vehicles without ABS
- Centering Diameter [mm]: 52,9
- Technical Information Number: 98100 0241 0 1
- Packaging length [cm]: 26,3
- Packaging width [cm]: 25,9
- Packaging height [cm]: 11,1
- Item number: 19-2180
- Manufacturer: MAXGEAR
- EAN number: 5901619566008
- Condition: New
- Fitting Position: Rear Axle
- Braking / Drive Dynamics: for vehicles without ABS
- Outer brake drum diameter [mm]: 228
- Inner brake drum diameter [mm]: 200
- Inner brake drum height [mm]: 36
- Rim Hole Number: 4
- Bolt Hole Circle Ø [mm]: 100
- Total brake drum height [mm]: 86
- Supplementary Article / Supplementary Info Info 2: without bearing
- Wheel Hub Diameter [mm]: 53
- Wheel Hub Diameter 2 [mm]: 51
- Item number: 2770-S
- Manufacturer: A.B.S.
- EAN number: 8717109238440
- Condition: New
- Fitting Position: Rear Axle
-
- Braking / Drive Dynamics: for vehicles without ABS
- Diameter [mm]: 200
- Outer brake drum diameter [mm]: 200, 228,0
- Inner brake drum height [mm]: 35
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Total brake drum height [mm]: 86
- max. brake drum reboring dimension [mm]: 201, 202
- Supplementary Article / Supplementary Info Info 2: with wheel hub, without wheel bearing, without ABS sensor ring
- Thread Size: M12x1,5
- Fitted Diameter1 / Fitted Diameter2 [mm]: 50-52.9
- Item number: SKBDM-0800100
- Manufacturer: STARK
- EAN number: 4059191199075
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Drum diameter [mm]: 228
- Outer brake drum diameter [mm]: 228
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Total brake drum height [mm]: 94
- Braking / Drive Dynamics: for vehicles with ABS
- Item number: V40-60005
- Manufacturer: VAICO
- EAN number: 4062375279814
- Condition: New
- Fitting Position: Rear Axle
- Braking / Drive Dynamics: for vehicles without ABS
- Outer brake drum diameter [mm]: 228,0
- Inner brake drum diameter [mm]: 200,0
- Inner brake drum height [mm]: 35,0
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100,0
- Total brake drum height [mm]: 85,7
- max. brake drum reboring dimension [mm]: 201,0
- Supplementary Article / Supplementary Info Info 2: without wheel bearing, without ABS sensor ring
- Support plate diameter [mm]: 53,0
- MAPP code available
- Thread Size: M12x1,5
- Inner Diameter 2 [mm]: 47,0
- Item number: 24.0220-0039.1
- Manufacturer: ATE
- EAN number: 4006633106986
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Braking / Drive Dynamics: for vehicles with ABS
- Outer brake drum diameter [mm]: 228
- Inner brake drum diameter [mm]: 200
- Inner brake drum height [mm]: 46
- Rim Hole Number: 4
- Bolt Hole Circle Ø [mm]: 100
- Total brake drum height [mm]: 94
- Supplementary Article / Supplementary Info Info 2: without bearing
- Wheel Hub Diameter [mm]: 53
- Item number: 2739-S
- Manufacturer: A.B.S.
- EAN number: 8717109238136
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Outer brake drum diameter [mm]: 228
- Inner brake drum diameter [mm]: 200
- Inner brake drum height [mm]: 54
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Total brake drum height [mm]: 94,2
- max. brake drum reboring dimension [mm]: 201
- Braking / Drive Dynamics: for vehicles with ABS
- Support plate diameter [mm]: 52,9
- Thread Size: M12x1,5
- Inner Diameter 2 [mm]: 27
- Item number: 35004
- Manufacturer: MAPCO
- EAN number: 4043605763501
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 265
- Rim Hole Number: 4
- Bolt Hole Circle Ø [mm]: 100
- max. brake drum reboring dimension [mm]: 231
- Weight [kg]: 4,2
- Centering Diameter [mm]: 57
- Thickness [mm]: 69
- Width [mm]: 50
- Number of mounting bores: 1
- Inner Diameter [mm]: 230
- for OE number: 05 68 066
- Item number: 17310
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816173106
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 200
- Outer brake drum diameter [mm]: 200,1
- Inner brake drum height [mm]: 54,8
- Number of Holes: 4
- Total brake drum height [mm]: 94,1
- max. brake drum reboring dimension [mm]: 201
- Supplementary Article / Supplementary Info Info 2: without wheel bearing kit
- Item number: 14.E311.10
- Manufacturer: BREMBO
- EAN number: 8020584325230
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Outer brake drum diameter [mm]: 228
- Inner brake drum diameter [mm]: 200
- Inner brake drum height [mm]: 54
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Total brake drum height [mm]: 94
- max. brake drum reboring dimension [mm]: 201
- Supplementary Article / Supplementary Info Info 2: with wheel hub, without wheel bearing, without wheel studs
- Weight [kg]: 5,5
- Braking / Drive Dynamics: for vehicles with ABS
- Centering Diameter [mm]: 52,9
- Wheel Bolt Bore Diameter [mm]: 12
- Assy. / disassy. by qualified personnel required!
- Item number: 8DT 355 300-411
- Manufacturer: HELLA
- EAN number: 4082300390339
- Condition: New
price incl. 19% VAT
- Fitting Position: Rear Axle
- Diameter [mm]: 265
- Rim Hole Number: 4
- Bolt Hole Circle Ø [mm]: 100
- max. brake drum reboring dimension [mm]: 231
- Weight [kg]: 4,2
- Centering Diameter [mm]: 57
- Thickness [mm]: 69
- Width [mm]: 50
- Number of mounting bores: 1
- Inner Diameter [mm]: 230
- for OE number: 05 68 066
- Item number: ADBP470019
- Manufacturer: BLUE PRINT
- EAN number: 5057746189327
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Outer brake drum diameter [mm]: 228
- Inner brake drum diameter [mm]: 200
- Inner brake drum height [mm]: 54
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Total brake drum height [mm]: 94
- max. brake drum reboring dimension [mm]: 201
- Supplementary Article / Supplementary Info Info 2: with wheel hub, without wheel bearing, without wheel studs
- Centering Diameter [mm]: 52,9
- Technical Information Number: 98100 0242 0 1
- Packaging length [cm]: 26,3
- Packaging width [cm]: 25,9
- Packaging height [cm]: 11,1
- Item number: 19-3701
- Manufacturer: MAXGEAR
- EAN number: 5903766333236
- Condition: New
Sample photo only
- Fitting Position: Rear Axle
- Inner brake drum diameter [mm]: 200
- Inner brake drum height [mm]: 54
- Bolt Hole Circle Ø [mm]: 100
- Weight [kg]: 5,5
- Braking / Drive Dynamics: for vehicles with ABS
- Number of mounting bores: 4
- Item number: 9190059
- Manufacturer: FTE
- EAN number: 3276429306963
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Outer brake drum diameter [mm]: 268,5
- Inner brake drum diameter [mm]: 228
- Inner brake drum height [mm]: 48
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Total brake drum height [mm]: 61
- max. brake drum reboring dimension [mm]: 230
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel studs, without ABS sensor ring
- Weight [kg]: 5,800
- Item number: 19-2239
- Manufacturer: MAXGEAR
- EAN number: 5901619571835
- Condition: New
- Fitting Position: Rear Axle
- Inner brake drum diameter [mm]: 228
- Inner brake drum height [mm]: 54
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Total brake drum height [mm]: 94
- max. brake drum reboring dimension [mm]: 201
- Supplementary Article / Supplementary Info Info 2: without ABS sensor ring, without wheel bearing
- Weight [kg]: 5,56
- Item number: 19-1357
- Manufacturer: MAXGEAR
- EAN number: 5901619542569
- Condition: New
- Fitting Position: Rear Axle
- Braking / Drive Dynamics: for vehicles without ABS
- Outer brake drum diameter [mm]: 228
- Inner brake drum diameter [mm]: 200
- Inner brake drum height [mm]: 34
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Total brake drum height [mm]: 84
- Centering Diameter [mm]: 52,9
- Item number: BF471
- Manufacturer: DELPHI
- EAN number: 5012759226056
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 265,2
- Rim Hole Number: 4
- Bolt Hole Circle Ø [mm]: 100
- max. brake drum reboring dimension [mm]: 231
- Weight [kg]: 4,2
- Centering Diameter [mm]: 57
- Thickness [mm]: 69,2
- Width [mm]: 50
- Number of mounting bores: 1
- Inner Diameter [mm]: 230
- Item number: 40 91 7310
- Manufacturer: SWAG
- EAN number: 4044688571984
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- 1
- 2
- 3
- 4