Renault Espace J63 2.2 4x4 Brake discs (108 hp Petrol J7T 772)
Recommended part replacement interval for your car for the part category Brake discs: every 50.000 km
- Fitting Position: Rear Axle
- Diameter [mm]: 253,7
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 12
- Height [mm]: 54,3
- Material: Cast Iron
- Surface: Uncoated
- Centering Diameter [mm]: 66,1
- Number of Holes: 4 / 6
- Wheel Bolt Bore Diameter [mm]: 12,8
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 10,5
- Inner Diameter [mm]: 134
- Tightening Torque [Nm]: 85
- Braking / Drive Dynamics: for vehicles with ABS
- Bore Diameter [mm]: 66, 12,8
- Supplementary Article / Supplementary Info Info 2: without bolts / screws
- Drilled: no
- Item number: 82B0927
- Manufacturer: RIDEX
- EAN number: 4059191141029
- Condition: New
price incl. 19% VAT
excl. delivery costs


- Fitting Position: Front Axle
- Diameter [mm]: 258,7
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 20,3
- Height [mm]: 46,4
- Material: Cast Iron
- Surface: Uncoated
- Centering Diameter [mm]: 61
- Number of Holes: 4 / 6
- Wheel Bolt Bore Diameter [mm]: 13
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 17,7
- Inner Diameter [mm]: 130
- Bore Diameter [mm]: 13,5
- Supplementary Article / Supplementary Info Info 2: without bolts / screws
- Drilled: no
- Item number: 82B0756
- Manufacturer: RIDEX
- EAN number: 4059191139507
- Condition: New
-
- Construction Year from: 05 / 1993
- Fitting Position: Rear Axle
- Braking / Drive Dynamics: for vehicles with ABS
- Vehicle Equipment: for vehicles with level control
- Diameter [mm]: 254
- Brake Disc Type: solid
- Height [mm]: 54
- Centering Diameter [mm]: 66
- Number of Holes: 4
- Minimum thickness [mm]: 10,5
- Drilled: no
- Item number: R1191P
- Manufacturer: SAMKO
- EAN number: 2234315875589
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 254
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 12
- Height [mm]: 54,5
- Centering Diameter [mm]: 66
- Rim Hole Number: 4
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 10,5
- Hub Diameter [mm]: 142
- Weight [kg]: 3,89
- Drilled: no
- Item number: 15959
- Manufacturer: A.B.S.
- EAN number: 8717109011210
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 254,0
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 12,0
- Height [mm]: 54,3
- Centering Diameter [mm]: 66,0
- Number of Holes: 4
- Test Mark: ECE-R90
- Drilled: no
- Item number: 23-0218
- Manufacturer: METELLI
- EAN number: 8032747201787
- Condition: New
-
- Construction Year to: 10 / 1996
- Fitting Position: Rear Axle
- Diameter [mm]: 257,0
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 10,5
- Height [mm]: 35,3
- Centering Diameter [mm]: 61,0
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100,0
- Minimum thickness [mm]: 9,5
- Inner Diameter [mm]: 134,0
- MAPP code available
- Test Mark: E1 90R-02C0165 / 0818
- Bore Diameter [mm]: 12,6
- Drilled: no
- Item number: 24.0111-0150.1
- Manufacturer: ATE
- EAN number: 4006633083720
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 259
- Brake Disc Type: Vented
- Product line: PREMIER
- Brake Disc Thickness [mm]: 20,2
- Height [mm]: 46,3
- Surface: Oiled
- Centering Diameter [mm]: 61
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 17,7
- Weight [kg]: 10,12
- Tightening Torque [Nm]: 85
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Packing Type: Box
- Packaging length [cm]: 25,5
- Packaging width [cm]: 25,5
- Packaging height [cm]: 8,5
- Drilled: no
- Item number: DDF159
- Manufacturer: FERODO
- EAN number: 5016687115994
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 259
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 20,2
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 17,7
- Weight [kg]: 2,3
- Required quantity: 2
- Drilled: no
- Item number: 15116
- Manufacturer: MAPCO
- EAN number: 4043605006264
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 259
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 20,2
- Height [mm]: 46,3
- Surface: Coated
- Centering Diameter [mm]: 61
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 17,7
- Weight [kg]: 10,12
- Tightening Torque [Nm]: 85
- Version: JC
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Packing Type: Box
- Packaging length [cm]: 27
- Packaging width [cm]: 27
- Packaging height [cm]: 12
- Drilled: no
- Item number: 561334JC
- Manufacturer: JURID
- EAN number: 3306437207553
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 259
- Brake Disc Type: internally vented
- Brake Disc Thickness [mm]: 20,2
- Height [mm]: 46
- Centering Diameter [mm]: 61
- Number of Holes: 4
- Minimum thickness [mm]: 17,7
- Tightening Torque [Nm]: 85
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 09.3149.14
- Manufacturer: BREMBO
- EAN number: 8020584012468
- Condition: New
-
- Braking / Drive Dynamics: for vehicles with ABS
- Vehicle Equipment: for vehicles with level control
- Fitting Position: Rear Axle
- Diameter [mm]: 253,5
- Brake Disc Type: solid
- Supplementary Info: Original VAICO Quality
- Brake Disc Thickness [mm]: 12
- Height [mm]: 54,2
- Centering Diameter [mm]: 66
- Rim Hole Number: 4
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 10,5
- Brake Disc Hub Height [mm]: 42,2
- Packaging width [cm]: 26
- Packaging height [cm]: 11
- Packaging Depth [cm]: 26
- Drilled: no
- Item number: V46-40012
- Manufacturer: VAICO
- EAN number: 4046001470141
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
- Fitting Position: Front Axle
- Braking / Drive Dynamics: for vehicles with ABS
- Diameter [mm]: 259
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 20,2
- Height [mm]: 46
- Surface: Painted
- Centering Diameter [mm]: 61
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 17,7
- Thread Size: 13
- Colour: black
- Test Mark: E1 90R-02 C0176 / 0701
- Drilled: no
- Item number: DF1017
- Manufacturer: TRW
- EAN number: 3322936101703
- Condition: New
-
- Fitting Position: Front Axle
- Braking / Drive Dynamics: for vehicles with ABS
- Diameter [mm]: 259
- Brake Disc Thickness [mm]: 20,2
- Height [mm]: 46
- Centering Diameter [mm]: 61
- Number of Holes: 4
- Drilled: no
- Item number: R1181V
- Manufacturer: SAMKO
- EAN number: 2234315875588
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 259
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 19,9
- Height [mm]: 46
- Centering Diameter [mm]: 61
- Rim Hole Number: 4
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 17,7
- Hub Diameter [mm]: 140
- Weight [kg]: 4,66
- Drilled: no
- Item number: 15114
- Manufacturer: A.B.S.
- EAN number: 8717109002973
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 259,0
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 19,7
- Height [mm]: 46
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 61,0
- Test Mark: ECE-R90
- Drilled: no
- Item number: 800-108
- Manufacturer: CIFAM
- EAN number: 2210324407170
- Condition: New
price incl. 19% VAT
- Fitting Position: Rear Axle
- Diameter [mm]: 265
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 10,3
- Height [mm]: 54,3
- Surface: Oiled
- Centering Diameter [mm]: 66
- Number of Holes: 5
- Minimum thickness [mm]: 9,5
- Test Mark: E1 90R-02C0100 / 1551
- Drilled: no
- Item number: BG3552
- Manufacturer: DELPHI
- EAN number: 5012759159354
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 259
- Brake Disc Type: Vented
- Construction Year to: 05 / 1996
- Brake Disc Thickness [mm]: 20,2
- Height [mm]: 46,3
- Centering Diameter [mm]: 61
- Number of Holes: 4
- Minimum thickness [mm]: 17,7
- Weight [kg]: 4,95
- Test Mark: K.B.A.: 61209
- Drilled: no
- Item number: 6204.10
- Manufacturer: REMSA
- EAN number: 8427975151858
- Condition: New
-
- TecDoc Engine Number: J7T 772, J7T 773
- Engine Code: J7T 776
- Construction Year to: 09 / 1996
- Fitting Position: Front Axle
- Diameter [mm]: 259
- Brake Disc Type: Vented, internally vented
- Brake Disc Thickness [mm]: 20,2
- Height [mm]: 46
- Surface: Oiled
- Centering Diameter [mm]: 61
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 17,7
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 12,7
- Drilled: no
- Item number: 0 986 478 270
- Manufacturer: BOSCH
- EAN number: 4047024199330
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 259
- Brake Disc Type: internally vented
- Brake Disc Thickness [mm]: 20,2
- Height [mm]: 46,3
- Centering Diameter [mm]: 61
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 61
- Thickness [mm]: 20,2
- Minimum thickness [mm]: 17,7
- Wear Warning Contact: with integrated wear warning contact
- Registration Type: with General Operating Permit (ABE)
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: C3R007ABE
- Manufacturer: ABE
- EAN number: 5900427201101
- Condition: New
-
- Construction Year from: 05 / 1993
- Braking / Drive Dynamics: for vehicles with ABS
- Vehicle Equipment: for vehicles with level control
- Fitting Position: Rear Axle
- Diameter [mm]: 253,8
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 12,0
- Height [mm]: 54,2
- Centering Diameter [mm]: 66,0
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100,0
- Minimum thickness [mm]: 10,5
- Inner Diameter [mm]: 134,0
- MAPP code available
- Test Mark: E1 90R-02C0165 / 0816
- Bore Diameter [mm]: 12,6
- Drilled: no
- Item number: 24.0112-0134.1
- Manufacturer: ATE
- EAN number: 4006633147262
- Condition: New
price incl. 19% VAT
excl. delivery costs
- 1
- 2
- 3
- 4
- 5
How much will brake disc replacement cost for my RENAULT Espace II (J63/S63) 2.2 4x4 (J/S637, J63G) 108hp / 79kW?
The cost of replacing brake discs ranges from 140 to 400 pounds