Vehicle identification number: 0035118
Opel Vectra C Saloon 2.8 V6 Turbo Brake discs (250 hp Petrol Z 28 NET)
Recommended part replacement interval for your car for the part category Brake discs: every 50.000 km
- Fitting Position: Rear Axle
- Diameter [mm]: 291,8
- Brake Disc Type: Vented
- Drilled: no
- Surface: Uncoated
- Machining: Untreated
- Supplementary Article / Supplementary Info Info 2: without bolts / screws
- Brake Disc Thickness [mm]: 19,9
- Height [mm]: 41,5
- Material: Cast Iron
- Centering Diameter [mm]: 65,5
- Number of Holes: 5 / 8
- Wheel Bolt Bore Diameter [mm]: 14,2
- Bolt Hole Circle Ø [mm]: 110
- Item number: 82B0152
- Manufacturer: RIDEX
- EAN number: 4059191317240
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 314
- Brake Disc Type: Vented
- Drilled: no
- Surface: Uncoated
- Machining: Untreated
- Supplementary Article / Supplementary Info Info 2: without bolts / screws
- Brake Disc Thickness [mm]: 28
- Height [mm]: 45,2
- Material: Cast Iron
- Centering Diameter [mm]: 70
- Number of Holes: 5 / 8
- Wheel Bolt Bore Diameter [mm]: 14,2
- Bolt Hole Circle Ø [mm]: 110
- not for vehicle configuration line / variant: OPC
- Item number: 82B0360
- Manufacturer: RIDEX
- EAN number: 4059191131716
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 291,8
- Brake Disc Type: Vented
- Drilled: no
- Surface: Coated
- Supplementary Article / Supplementary Info Info 2: without bolts / screws
- Brake Disc Thickness [mm]: 19,9
- Height [mm]: 41,5
- Material: Cast Iron
- Centering Diameter [mm]: 65,5
- Number of Holes: 5 / 8
- Wheel Bolt Bore Diameter [mm]: 14,2
- Bolt Hole Circle Ø [mm]: 110
- Item number: 82B0152P
- Manufacturer: RIDEX PLUS
- EAN number: 4067448707065
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 345
- Brake Disc Type: Vented
- Drilled: no
- Surface: Uncoated
- Machining: Untreated
- Supplementary Article / Supplementary Info Info 2: without bolts / screws
- Brake Disc Thickness [mm]: 30
- Height [mm]: 45,4
- Material: Cast Iron
- Centering Diameter [mm]: 70,1
- Number of Holes: 5 / 8
- Wheel Bolt Bore Diameter [mm]: 14,2
- Bolt Hole Circle Ø [mm]: 110
- Item number: 82B1141
- Manufacturer: RIDEX
- EAN number: 4059191266388
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 291,8
- Brake Disc Type: Vented
- Drilled: no
- Surface: Uncoated
- Machining: Untreated
- Supplementary Article / Supplementary Info Info 2: without bolts / screws
- Brake Disc Thickness [mm]: 19,9
- Height [mm]: 41,5
- Material: Cast Iron
- Centering Diameter [mm]: 65,5
- Number of Holes: 5 / 8
- Wheel Bolt Bore Diameter [mm]: 14,2
- Bolt Hole Circle Ø [mm]: 110
- Item number: SKBD-0020156
- Manufacturer: STARK
- EAN number: 4059191041206
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 314
- Brake Disc Type: Vented
- Drilled: no
- Surface: Uncoated
- Machining: Untreated
- Supplementary Article / Supplementary Info Info 2: without bolts / screws
- Brake Disc Thickness [mm]: 28
- Height [mm]: 45,2
- Material: Cast Iron
- Centering Diameter [mm]: 70
- Number of Holes: 5 / 8
- Wheel Bolt Bore Diameter [mm]: 14,2
- Bolt Hole Circle Ø [mm]: 110
- not for vehicle configuration line / variant: OPC
- Item number: SKBD-0020365
- Manufacturer: STARK
- EAN number: 4059191042449
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 278
- Brake Disc Type: solid
- Drilled: no
- Surface: Coated
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Brake Disc Thickness [mm]: 12
- Height [mm]: 41,5
- Centering Diameter [mm]: 65,5
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 110
- Minimum thickness [mm]: 10
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 14,3
- Item number: 0 986 479 B74
- Manufacturer: BOSCH
- EAN number: 4047025348966
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 314
- Brake Disc Type: internally vented
- Drilled: no
- Surface: Coated
- Brake Disc Thickness [mm]: 28
- Centering Diameter [mm]: 70
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 110
- Thickness [mm]: 45
- Minimum thickness [mm]: 25
- Number of mounting bores: 1
- Observe service information
- Item number: 44130
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816441304
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Diameter [mm]: 292
- Brake Disc Type: Vented
- Drilled: no
- Supplementary Info: Original VAICO Quality
- Brake Disc Thickness [mm]: 19,9
- Height [mm]: 41,4
- Centering Diameter [mm]: 65,5
- Number of Holes: 5
- Rim Hole Number: 5
- Bore Diameter 2 [mm]: 6,5
- Bolt Hole Circle Ø [mm]: 110
- Minimum thickness [mm]: 18
- Weight [kg]: 5,74
- Brake Disc Hub Height [mm]: 21,6
- Packaging width [cm]: 26
- Packaging height [cm]: 10
- Packaging Depth [cm]: 26
- Item number: V40-80050
- Manufacturer: VAICO
- EAN number: 4046001339295
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Rear Axle
- Diameter [mm]: 278
- Brake Disc Type: solid
- Drilled: no
- Supplementary Info: Original VAICO Quality
- Brake Disc Thickness [mm]: 11,9
- Height [mm]: 41,4
- Centering Diameter [mm]: 65,5
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 110
- Minimum thickness [mm]: 10
- Inner Diameter [mm]: 145,2
- Weight [kg]: 4,936
- Brake Disc Hub Height [mm]: 29,5
- Packaging width [cm]: 28
- Packaging height [cm]: 9
- Packaging Depth [cm]: 28
- Item number: V40-40032
- Manufacturer: VAICO
- EAN number: 4046001339349
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Rear Axle
- Diameter [mm]: 292
- Brake Disc Type: Vented
- Drilled: no
- Brake Disc Thickness [mm]: 20
- Height [mm]: 42,4
- Centering Diameter [mm]: 65,5
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 110
- Minimum thickness [mm]: 18
- Weight [kg]: 5,47
- Test Mark: ECE-R90
- Item number: 9072565
- Manufacturer: FTE
- EAN number: 3276429798881
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 278
- Brake Disc Type: solid
- Drilled: no
- Surface: Coated
- Brake Disc Thickness [mm]: 12
- Centering Diameter [mm]: 65,6
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 110
- Thickness [mm]: 42
- Minimum thickness [mm]: 10
- Number of mounting bores: 1
- Observe service information
- Item number: 23562
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816235620
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Diameter [mm]: 278
- Brake Disc Type: solid
- Drilled: no
- Surface: Coated
- Brake Disc Thickness [mm]: 12
- Centering Diameter [mm]: 65,6
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 110
- Thickness [mm]: 42
- Minimum thickness [mm]: 10
- Number of mounting bores: 1
- Observe service information
- Item number: ADA104336
- Manufacturer: BLUE PRINT
- EAN number: 5050063618969
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Diameter [mm]: 278
- Brake Disc Type: solid
- Drilled: no
- Surface: Coated
- Brake Disc Thickness [mm]: 12
- Centering Diameter [mm]: 65,6, 65,5
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 110
- Thickness [mm]: 41,5
- Minimum thickness [mm]: 10
- Weight [kg]: 4,730
- Number of mounting bores: 1
- Item number: 40 92 3562
- Manufacturer: SWAG
- EAN number: 4044688565730
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Diameter [mm]: 278
- Construction Year from: 10 / 2006
- Brake Disc Type: solid
- Drilled: no
- Surface: Coated
- Brake Disc Thickness [mm]: 12
- Height [mm]: 41,5
- Centering Diameter [mm]: 65,5
- Number of Holes: 5
- Minimum thickness [mm]: 10
- Test Mark: E1 90R-02C0250 / 1562
- Item number: BG3731C
- Manufacturer: DELPHI
- EAN number: 5012759533598
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 278
- Brake Disc Type: solid
- Drilled: no
- Surface: Painted
- Brake Disc Thickness [mm]: 12
- Height [mm]: 41,4
- Centering Diameter [mm]: 65,5
- Number of Holes: 7
- Bolt Hole Circle Ø [mm]: 110
- Minimum thickness [mm]: 10
- Thread Size: 14
- Colour: black
- Test Mark: E1 90R-02 C0190 / 0525
- Item number: DF4266
- Manufacturer: TRW
- EAN number: 3322937369706
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 278
- Brake Disc Type: solid
- Drilled: no
- Supplementary Info: ORIGINAL Quality
- Brake Disc Thickness [mm]: 12
- Height [mm]: 41,4
- Centering Diameter [mm]: 65,5
- Number of Holes: 5
- Wheel Bolt Bore Diameter [mm]: 14
- Bolt Hole Circle Ø [mm]: 110
- Minimum thickness [mm]: 10
- Required quantity: 2
- Item number: 615 523 0025
- Manufacturer: MEYLE
- EAN number: 4040074200490
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 292
- Brake Disc Type: internally vented
- Drilled: no
- Surface: Coated
- Brake Disc Thickness [mm]: 20
- Centering Diameter [mm]: 65,5
- Rim Hole Number: 5
- Thickness [mm]: 42
- Minimum thickness [mm]: 18
- Number of mounting bores: 1
- Observe service information
- Item number: 23545
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816235453
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Paired product: 573186J
- Diameter [mm]: 292
- Brake Disc Type: Vented
- Drilled: no
- Surface: Coated
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Brake Disc Thickness [mm]: 20
- Height [mm]: 41,5
- Centering Diameter [mm]: 65,5
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 110
- Minimum thickness [mm]: 18
- Weight [kg]: 10,44
- Tightening Torque [Nm]: 120
- Version: JC
- Packing Type: Box
- Packaging width [cm]: 31
- Packaging height [cm]: 11,5
- Item number: 562220JC
- Manufacturer: JURID
- EAN number: 3306437218207
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 292
- Brake Disc Type: Vented
- Drilled: no
- Supplementary Info: ORIGINAL Quality
- Brake Disc Thickness [mm]: 20
- Height [mm]: 41,5
- Centering Diameter [mm]: 65,5
- Number of Holes: 5
- Wheel Bolt Bore Diameter [mm]: 14
- Bolt Hole Circle Ø [mm]: 110
- Minimum thickness [mm]: 18
- Required quantity: 2
- Braking System: for vehicles with reinforced brakes
- Item number: 615 523 6027
- Manufacturer: MEYLE
- EAN number: 4040074410318
- Condition: New
price incl. 19% VAT
excl. delivery costs
- 1
- 2
- 3
- 4
- 5
How much will brake disc replacement cost for my OPEL Vectra C Saloon (Z02) 2.8 V6 Turbo (F69) 250hp / 184kW?
The cost of replacing brake discs ranges from 140 to 400 pounds