Vehicle identification number: 7107AAR
Mitsubishi Outlander 2 2.0 DI-D Brake discs (140 hp Diesel BSY)
Recommended part replacement interval for your car for the part category Brake discs: every 50.000 km
- Fitting Position: Rear Axle
- Diameter [mm]: 302
- Brake Disc Type: solid
- Drilled: no
- Surface: Uncoated
- Machining: Untreated
- Supplementary Article / Supplementary Info Info 2: without bolts / screws
- Brake Disc Thickness [mm]: 10
- Height [mm]: 58,7
- Material: Cast Iron
- Centering Diameter [mm]: 80
- Number of Holes: 5 / 8
- Wheel Bolt Bore Diameter [mm]: 12,6
- Bolt Hole Circle Ø [mm]: 114,3
- Item number: 82B0405
- Manufacturer: RIDEX
- EAN number: 4059191317776
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 294
- Brake Disc Type: Vented
- Drilled: no
- Surface: Uncoated
- Machining: Untreated
- Supplementary Article / Supplementary Info Info 2: without bolts / screws
- Brake Disc Thickness [mm]: 24
- Height [mm]: 45,7
- Material: Cast Iron
- Centering Diameter [mm]: 69
- Number of Holes: 5 / 7
- Wheel Bolt Bore Diameter [mm]: 12,6
- Bolt Hole Circle Ø [mm]: 114,3
- usable for vehicles to construction year: 2016 / 11
- Item number: 82B0154
- Manufacturer: RIDEX
- EAN number: 4059191315710
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 302
- Brake Disc Type: solid
- Drilled: no
- Surface: Coated
- Supplementary Article / Supplementary Info Info 2: without bolts / screws
- Brake Disc Thickness [mm]: 10
- Height [mm]: 58,7
- Material: Cast Iron
- Centering Diameter [mm]: 80
- Number of Holes: 5 / 8
- Wheel Bolt Bore Diameter [mm]: 12,6
- Bolt Hole Circle Ø [mm]: 114,3
- Item number: 82B0405P
- Manufacturer: RIDEX PLUS
- EAN number: 4066423805130
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 294
- Brake Disc Type: Vented
- Drilled: no
- Surface: Coated
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel studs
- Brake Disc Thickness [mm]: 24
- Height [mm]: 45,7
- Material: Grey Cast Iron
- Centering Diameter [mm]: 69
- Number of Holes: 5 / 7
- Wheel Bolt Bore Diameter [mm]: 12,6
- Bolt Hole Circle Ø [mm]: 114,3
- usable for vehicles to construction year: 2016 / 11
- Item number: 82B0154P
- Manufacturer: RIDEX PLUS
- EAN number: 4066423804850
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 302
- Brake Disc Type: solid
- Drilled: no
- Surface: Uncoated
- Machining: Untreated
- Supplementary Article / Supplementary Info Info 2: without bolts / screws
- Brake Disc Thickness [mm]: 10
- Height [mm]: 58,7
- Material: Cast Iron
- Centering Diameter [mm]: 80
- Number of Holes: 5 / 8
- Wheel Bolt Bore Diameter [mm]: 12,6
- Bolt Hole Circle Ø [mm]: 114,3
- Item number: SKBD-0022074
- Manufacturer: STARK
- EAN number: 4059191065882
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 294
- Brake Disc Type: Vented
- Drilled: no
- Surface: Uncoated
- Machining: Untreated
- Supplementary Article / Supplementary Info Info 2: without bolts / screws
- Brake Disc Thickness [mm]: 24
- Height [mm]: 45,7
- Material: Cast Iron
- Centering Diameter [mm]: 69
- Number of Holes: 5 / 7
- Wheel Bolt Bore Diameter [mm]: 12,6
- Bolt Hole Circle Ø [mm]: 114,3
- usable for vehicles to construction year: 2016 / 11
- Item number: SKBD-0020158
- Manufacturer: STARK
- EAN number: 4059191032020
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 302
- Construction Year from: 09 / 2009
- Brake Disc Type: solid
- Drilled: no
- Surface: Coated
- Vehicle Equipment: for vehicles with 3rd seating row
- Product line: Prime
- Brake Disc Thickness [mm]: 10
- Height [mm]: 59
- Centering Diameter [mm]: 80
- Number of Holes: 5
- Minimum thickness [mm]: 8,4
- Tightening Torque [Nm]: 100
- Item number: 08.A755.11
- Manufacturer: BREMBO
- EAN number: 8020584032855
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 302
- Brake Disc Type: solid
- Drilled: no
- Surface: Coated
- Brake Disc Thickness [mm]: 10
- Centering Diameter [mm]: 80
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 114
- Thickness [mm]: 59
- Minimum thickness [mm]: 8,4
- Number of mounting bores: 3
- Number of seats: 7
- Observe service information
- Item number: 29309
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816293095
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 294
- Construction Year to: 06 / 2010
- Brake Disc Type: Vented
- Drilled: no
- Surface: Oiled
- Brake Disc Thickness [mm]: 24
- Height [mm]: 45,9
- Centering Diameter [mm]: 69
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 114,3
- Minimum thickness [mm]: 22,4
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 12,7
- Item number: 0 986 479 372
- Manufacturer: BOSCH
- EAN number: 4047024293243
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 302
- Brake Disc Type: solid
- Drilled: no
- Surface: Coated
- Supplementary Article / Supplementary Info Info 2: without bolts / screws
- Brake Disc Thickness [mm]: 10
- Height [mm]: 58,7
- Material: Cast Iron
- Centering Diameter [mm]: 80
- Number of Holes: 5 / 8
- Wheel Bolt Bore Diameter [mm]: 12,6
- Bolt Hole Circle Ø [mm]: 114,3
- Item number: GCH20379
- Manufacturer: goCORE
- EAN number: 4067448489244
- Condition: New
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- Fitting Position: Front Axle
- Diameter [mm]: 294
- Brake Disc Type: Vented
- Drilled: no
- Surface: Coated
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Brake Disc Thickness [mm]: 24
- Height [mm]: 45,7
- Material: Grey Cast Iron
- Centering Diameter [mm]: 69
- Number of Holes: 5 / 7
- Wheel Bolt Bore Diameter [mm]: 12,6
- Bolt Hole Circle Ø [mm]: 114,3
- usable for vehicles to construction year: 2016 / 11
- Item number: GCH20111
- Manufacturer: goCORE
- EAN number: 4069198074886
- Condition: New
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- Fitting Position: Rear Axle
- Diameter [mm]: 302
- Construction Year to: 08 / 2009
- Construction Year from: 09 / 2009
- Brake Disc Type: solid
- Drilled: no
- Vehicle Equipment: for vehicles without 3rd seating row
- Supplementary Info: Original VAICO Quality
- Brake Disc Thickness [mm]: 10
- Height [mm]: 60,1
- Centering Diameter [mm]: 80
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 114,3
- Minimum thickness [mm]: 8,4
- Brake Disc Hub Height [mm]: 48,7
- Packaging width [cm]: 32
- Packaging height [cm]: 12
- Packaging Depth [cm]: 32
- Item number: V22-40013
- Manufacturer: VAICO
- EAN number: 4046001550027
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Rear Axle
- Diameter [mm]: 302
- Brake Disc Type: solid
- Drilled: no
- Brake Disc Thickness [mm]: 10
- Item number: V33-40010
- Manufacturer: VAICO
- EAN number: 4062375125524
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 302,3
- Construction Year to: 06 / 2010
- Construction Year from: 09 / 2009
- Brake Disc Type: solid
- Drilled: no
- Surface: Oiled
- Brake Disc Thickness [mm]: 10
- Height [mm]: 60,5
- Centering Diameter [mm]: 80
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 114,3
- Minimum thickness [mm]: 8,4
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 12,6
- Item number: 0 986 479 R07
- Manufacturer: BOSCH
- EAN number: 4047025126946
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 294
- Brake Disc Type: Vented
- Drilled: no
- Supplementary Info: Original VAICO Quality
- Brake Disc Thickness [mm]: 24
- Height [mm]: 45,5
- Centering Diameter [mm]: 69
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 114,3
- Minimum thickness [mm]: 22,4
- Brake Disc Hub Height [mm]: 21,7
- Packaging width [cm]: 30
- Packaging height [cm]: 10
- Packaging Depth [cm]: 30
- Item number: V22-80008
- Manufacturer: VAICO
- EAN number: 4046001550430
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Rear Axle
- Diameter [mm]: 302
- Brake Disc Type: solid
- Drilled: no
- Surface: Coated
- Brake Disc Thickness [mm]: 10
- Centering Diameter [mm]: 80
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 114
- Thickness [mm]: 60
- Minimum thickness [mm]: 8,4
- Number of seats: 5
- Observe service information
- Item number: ADC443125
- Manufacturer: BLUE PRINT
- EAN number: 5050063056358
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 302
- Brake Disc Type: solid
- Drilled: no
- Surface: Coated
- Brake Disc Thickness [mm]: 10
- Centering Diameter [mm]: 80
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 114
- Thickness [mm]: 60
- Minimum thickness [mm]: 8,4
- Number of seats: 5
- Observe service information
- Item number: 108491
- Manufacturer: FEBI BILSTEIN
- EAN number: 4054224084915
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 294
- Brake Disc Type: internally vented
- Drilled: no
- Surface: Coated
- Brake Disc Thickness [mm]: 24
- Centering Diameter [mm]: 69
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 114
- Thickness [mm]: 46
- Minimum thickness [mm]: 22,4
- Observe service information
- Item number: 28440
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816284406
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 302
- Brake Disc Type: solid
- Drilled: no
- Surface: Coated
- Brake Disc Thickness [mm]: 10
- Centering Diameter [mm]: 80
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 114
- Thickness [mm]: 59
- Minimum thickness [mm]: 8,4
- Number of mounting bores: 3
- Number of seats: 7
- Observe service information
- Item number: ADC443109
- Manufacturer: BLUE PRINT
- EAN number: 5050063639377
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 302
- Brake Disc Type: solid
- Drilled: no
- Surface: Coated
- Supplementary Article / Supplementary Info Info 2: without bolts / screws
- Brake Disc Thickness [mm]: 10
- Height [mm]: 59
- Centering Diameter [mm]: 80
- Number of Holes: 5
- Minimum thickness [mm]: 8,4
- Weight [kg]: 11,35
- Tightening Torque [Nm]: 100
- Version: JC
- Packing Type: Box
- Packaging length [cm]: 33
- Packaging width [cm]: 33
- Packaging height [cm]: 15
- Item number: 562527JC
- Manufacturer: JURID
- EAN number: 3306437188555
- Condition: New
price incl. 19% VAT
excl. delivery costs
- 1
- 2
- 3
- 4
- 5
How much will brake disc replacement cost for my MITSUBISHI Outlander II Off-Road (CW_W) 2.0DI-D (CW8W) 140hp / 103kW?
The cost of replacing brake discs ranges from 140 to 400 pounds