Vehicle identification number: 1313BSN
W221 S 250 CDI 2.2 Brake discs (204 hp Diesel OM 651.961)
Recommended part replacement interval for your car for the part category Brake discs: every 50.000 km
- Fitting Position: Rear Axle
- Diameter [mm]: 320
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 24
- Height [mm]: 58,3
- Material: Cast Iron
- Surface: Uncoated
- Centering Diameter [mm]: 67
- Number of Holes: 5 / 6
- Wheel Bolt Bore Diameter [mm]: 15,3
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 21,4
- Inner Diameter [mm]: 180
- Vehicle Equipment: for vehicles with AMG Sports Package
- Supplementary Article / Supplementary Info Info 2: without bolts / screws
- Drilled: no
- Item number: 82B0954
- Manufacturer: RIDEX
- EAN number: 4059191139910
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 12
- Height [mm]: 58,4
- Material: Cast Iron
- Surface: Uncoated
- Centering Diameter [mm]: 67
- Number of Holes: 5 / 6
- Wheel Bolt Bore Diameter [mm]: 15,3
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 10
- Inner Diameter [mm]: 180
- Vehicle Equipment: for vehicles without AMG sports package, for vehicles without sports package
- Bore Diameter [mm]: 15,3
- Supplementary Article / Supplementary Info Info 2: without bolts / screws
- Drilled: no
- Item number: 82B0998
- Manufacturer: RIDEX
- EAN number: 4059191154463
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22
- Height [mm]: 58,3
- Material: Cast Iron
- Surface: Uncoated
- Centering Diameter [mm]: 67
- Number of Holes: 5 / 6
- Wheel Bolt Bore Diameter [mm]: 15,3
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 19,4
- Inner Diameter [mm]: 180
- Vehicle Equipment: for vehicles without AMG sports package, for vehicles without sports package
- Bore Diameter [mm]: 15,2
- Supplementary Article / Supplementary Info Info 2: without bolts / screws
- Drilled: no
- Item number: 82B1127
- Manufacturer: RIDEX
- EAN number: 4059191217830
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 335
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 32
- Height [mm]: 64,5
- Material: Cast Iron
- Surface: Uncoated
- Centering Diameter [mm]: 67
- Number of Holes: 5 / 6
- Wheel Bolt Bore Diameter [mm]: 15,3
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 30
- Inner Diameter [mm]: 154,3
- Machining: High-carbon
- Vehicle Equipment: for vehicles without AMG sports package, for vehicles without sports package
- Supplementary Article / Supplementary Info Info 2: without bolts / screws
- Drilled: yes
- Item number: 82B0598
- Manufacturer: RIDEX
- EAN number: 4059191127467
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 350
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 32
- Height [mm]: 64,5
- Material: Cast Iron
- Surface: Uncoated
- Centering Diameter [mm]: 67
- Number of Holes: 5 / 6
- Wheel Bolt Bore Diameter [mm]: 15,3
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 30
- Inner Diameter [mm]: 154,3
- Machining: High-carbon
- Vehicle Equipment: for vehicles with AMG Sports Package, for vehicles with sports package
- Bore Diameter [mm]: 15,2
- Supplementary Article / Supplementary Info Info 2: without bolts / screws
- Drilled: yes
- Item number: 82B0554
- Manufacturer: RIDEX
- EAN number: 4059191134175
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 12
- Height [mm]: 58,4
- Material: Cast Iron
- Surface: Uncoated
- Centering Diameter [mm]: 67
- Number of Holes: 5 / 6
- Wheel Bolt Bore Diameter [mm]: 15,3
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 10
- Inner Diameter [mm]: 180
- Vehicle Equipment: for vehicles without AMG sports package, for vehicles without sports package
- Bore Diameter [mm]: 15,3
- Supplementary Article / Supplementary Info Info 2: without bolts / screws
- Drilled: no
- Item number: SKBD-0023148
- Manufacturer: STARK
- EAN number: 4059191144419
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: solid
- Supplementary Info: Original VAICO Quality
- Brake Disc Thickness [mm]: 12
- Height [mm]: 58,3
- Centering Diameter [mm]: 67
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 10
- Vehicle Equipment: for vehicles without AMG sports package
- Brake Disc Hub Height [mm]: 46,3
- Packaging width [cm]: 32
- Packaging height [cm]: 13
- Packaging Depth [cm]: 32
- Drilled: no
- Item number: V30-40017
- Manufacturer: VAICO
- EAN number: 4046001446405
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
Sample photo only
-
- Vehicle Equipment: for vehicles without AMG sports package
- Construction Year to: 05 / 2013
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 12
- Height [mm]: 58,3
- Surface: Coated
- Centering Diameter [mm]: 67
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 10
- Inner Diameter [mm]: 180
- Bore Diameter [mm]: 15,3
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Item number: 24011201831PR-PCS-MS
- Manufacturer: MASTER-SPORT
- EAN number: 4255708576371
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 12
- Surface: Coated
- Centering Diameter [mm]: 67
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 58
- Minimum thickness [mm]: 10
- Weight [kg]: 5,413
- Number of mounting bores: 1
- Observe service information
- Drilled: no
- Item number: ADU174379
- Manufacturer: BLUE PRINT
- EAN number: 5057746117757
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 331
- Brake Disc Type: solid
- Supplementary Info: Original VAICO Quality
- Brake Disc Thickness [mm]: 13,9
- Height [mm]: 55,3
- Centering Diameter [mm]: 67
- Rim Hole Number: 5
- Bore Diameter 2 [mm]: 9
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 12,3
- Weight [kg]: 8,718
- Suspension: for vehicles without sports suspension
- Brake Disc Hub Height [mm]: 41
- Packaging width [cm]: 34
- Packaging height [cm]: 12
- Packaging Depth [cm]: 34
- Drilled: no
- Item number: V30-40043
- Manufacturer: VAICO
- EAN number: 4046001248290
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 12
- Surface: Coated
- Centering Diameter [mm]: 67
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 58,3
- Minimum thickness [mm]: 10
- Weight [kg]: 5,413
- Number of mounting bores: 1
- Observe service information
- Drilled: no
- Item number: 26404
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816264040
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 12
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- for OE number: 221 423 0712
- Drilled: no
- Item number: 02.35.211
- Manufacturer: TRUCKTEC AUTOMOTIVE
- EAN number: 4038081443887
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Rear Axle
- Vehicle Equipment: for vehicles with AMG Sports Package, for vehicles with sports package
- Diameter [mm]: 320
- Brake Disc Type: internally vented
- Brake Disc Thickness [mm]: 24
- Height [mm]: 58,3
- Surface: Painted
- Centering Diameter [mm]: 67
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 21,4
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel studs
- Drilled: no
- Item number: QD2019HC
- Manufacturer: QUARO
- EAN number: 5903766335780
- Condition: New
-
- Fitting Position: Rear Axle
- Vehicle Equipment: for vehicles without sports package
- Diameter [mm]: 300
- Brake Disc Type: solid
- Product line: COATED
- Brake Disc Thickness [mm]: 12
- Height [mm]: 58,4
- Surface: Coated
- Centering Diameter [mm]: 67
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 10
- Hub Diameter [mm]: 168
- Weight [kg]: 5,42
- Drilled: no
- Item number: 17838
- Manufacturer: A.B.S.
- EAN number: 8717109566420
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Rear Axle
- Vehicle Equipment: for vehicles without sports package
- Diameter [mm]: 300
- Brake Disc Type: solid
- Product line: COATED DISC LINE
- Brake Disc Thickness [mm]: 12
- Height [mm]: 58
- Surface: Coated
- Centering Diameter [mm]: 67
- Number of Holes: 5
- Minimum thickness [mm]: 10
- Tightening Torque [Nm]: 150
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 08.A734.11
- Manufacturer: BREMBO
- EAN number: 8020584020227
- Condition: New
-
- Fitting Position: Rear Axle
- Vehicle Equipment: for vehicles without AMG sports package
- Construction Year to: 05 / 2013
- Diameter [mm]: 300
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 12
- Height [mm]: 58,3
- Centering Diameter [mm]: 67
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 10,0
- Inner Diameter [mm]: 180,0
- Bore Diameter [mm]: 15,3
- Drilled: no
- Item number: B130570
- Manufacturer: DENCKERMANN
- EAN number: 2218610704866
- Condition: New
-
- Construction Year to: 07 / 2013
- Vehicle Equipment: for vehicles without sports package
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: solid
- Supplementary Info: MEYLE-PD Quality
- Brake Disc Thickness [mm]: 12
- Height [mm]: 58,3
- Surface: Zink flake coated
- Centering Diameter [mm]: 67
- Number of Holes: 5
- Wheel Bolt Bore Diameter [mm]: 15,3
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 10
- Required quantity: 2
- Quality: PREMIUM
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 015 523 0030/PD
- Manufacturer: MEYLE
- EAN number: 4040074209189
- Condition: New
MEYLE-PD brake disc with high-grade finish and brillant appearance: Modern cutting-edge coating technology for long lasting anti-corrosion protection. No degreasing needed, ready-to-fit. Easy rim disassembly due to coated mounting surfaces.
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Rear Axle
- Vehicle Equipment: for vehicles without sports package
- Diameter [mm]: 300
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 12
- Height [mm]: 58,4
- Surface: Painted
- Centering Diameter [mm]: 67
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 10
- Thread Size: 15,3
- Colour: black
- Test Mark: E1 90R-02 C0204 / 0742
- Drum diameter [mm]: 180
- Drilled: no
- Item number: DF4915
- Manufacturer: TRW
- EAN number: 3322937950911
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22
- Height [mm]: 58,3
- Material: Cast Iron
- Surface: Uncoated
- Centering Diameter [mm]: 67
- Number of Holes: 5 / 6
- Wheel Bolt Bore Diameter [mm]: 15,3
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 19,4
- Inner Diameter [mm]: 180
- Vehicle Equipment: for vehicles without AMG sports package, for vehicles without sports package
- Bore Diameter [mm]: 15,2
- Supplementary Article / Supplementary Info Info 2: without bolts / screws
- Drilled: no
- Item number: SKBD-0023277
- Manufacturer: STARK
- EAN number: 4059191194735
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Rear Axle
- Construction Year to: 07 / 2013
- Vehicle Equipment: for vehicles with sports package
- Diameter [mm]: 320
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 24
- Height [mm]: 58
- Surface: Coated
- Centering Diameter [mm]: 67
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 21,5
- Machining: High-carbon
- Colour: grey
- Supplementary Article / Supplementary Info Info 2: without wheel bearing
- Drilled: no
- Item number: BR 422 VH100
- Manufacturer: BRECK
- EAN number: 5901958625435
- Condition: New
- 1
- 2
- 3
- 4
- 5
How much will brake disc replacement cost for my MERCEDES-BENZ S-Class Saloon (W221) S250CDI (221.003, 221.103) 204hp / 150kW?
The cost of replacing brake discs ranges from 140 to 400 pounds