Vehicle identification number: 1313BHM
Mercedes S212 E 300 CDI / BlueTEC 3.0 Brake discs (231 hp Diesel OM 642.852)
Recommended part replacement interval for your car for the part category Brake discs: every 50.000 km
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: Vented
- Brake System: ATE
- Brake Disc Thickness [mm]: 22
- Height [mm]: 67,2
- Material: Cast Iron
- Surface: Uncoated
- Centering Diameter [mm]: 67
- Number of Holes: 5 / 6
- Wheel Bolt Bore Diameter [mm]: 15,4
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 19,4
- Inner Diameter [mm]: 180
- Tightening Torque [Nm]: 130
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: without bolts / screws
- Drilled: no
- Item number: 82B0636
- Manufacturer: RIDEX
- EAN number: 4059191316564
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Rear Axle
- Brake System: ATE
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: internally vented
- Brake Disc Thickness [mm]: 22
- Height [mm]: 68
- Material: Grey Cast Iron
- Surface: Coated
- Centering Diameter [mm]: 67
- Number of Holes: 5
- Minimum thickness [mm]: 19,4
- Tightening Torque [Nm]: 130
- Machining: High-carbon
- Vehicle configuration line / variant: with bolts / screws
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 82B0636P
- Manufacturer: RIDEX PLUS
- EAN number: 4059191997473
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 322
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 32
- Height [mm]: 64,3
- Material: Cast Iron
- Surface: Uncoated
- Centering Diameter [mm]: 67
- Number of Holes: 5 / 6
- Wheel Bolt Bore Diameter [mm]: 15,3
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 29,4
- Inner Diameter [mm]: 154,3
- Machining: Alloyed / High-carbon
- Vehicle Equipment: for vehicles without sports package, for vehicles without AMG sports package
- Bore Diameter [mm]: 15,2
- Supplementary Article / Supplementary Info Info 2: without bolts / screws
- usable for vehicles to construction year: 2016 / 11
- Drilled: no
- Item number: 82B0550
- Manufacturer: RIDEX
- EAN number: 4059191128228
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 322
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 32
- Height [mm]: 64,5
- Material: Cast Iron
- Surface: Uncoated
- Centering Diameter [mm]: 67,1
- Number of Holes: 5 / 6
- Wheel Bolt Bore Diameter [mm]: 15,3
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 30
- Inner Diameter [mm]: 154,2
- Vehicle Equipment: for vehicles with AMG Sports Package, for vehicles with sports package
- Bore Diameter [mm]: 15,2
- Supplementary Article / Supplementary Info Info 2: without bolts / screws
- Drilled: yes
- Item number: 82B0512
- Manufacturer: RIDEX
- EAN number: 4059191125326
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle
- Vehicle Equipment: for vehicles with AMG Sports Package, for vehicles with sports package
- Fitting Position: Front Axle
- Diameter [mm]: 322
- Brake Disc Type: perforated / vented
- Brake Disc Thickness [mm]: 32
- Height [mm]: 64,5
- Material: Grey Cast Iron
- Surface: Coated
- Centering Diameter [mm]: 67
- Hole Arrangement / Number: 05 / 06
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 30
- Weight [kg]: 10,7
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel studs
- Drilled: yes
- Item number: 82B0512P
- Manufacturer: RIDEX PLUS
- EAN number: 4066423805383
- Condition: New
-
- Fitting Position: Rear Axle
- Brake System: ATE
- Diameter [mm]: 300
- Brake Disc Type: internally vented
- Brake Disc Thickness [mm]: 22
- Height [mm]: 68
- Surface: Coated
- Centering Diameter [mm]: 67
- Number of Holes: 5
- Minimum thickness [mm]: 19,4
- Tightening Torque [Nm]: 130
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: GCH20523
- Manufacturer: goCORE
- EAN number: 4067448490684
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: Vented
- Brake System: ATE
- Brake Disc Thickness [mm]: 22
- Height [mm]: 67,2
- Material: Cast Iron
- Surface: Uncoated
- Centering Diameter [mm]: 67
- Number of Holes: 5 / 6
- Wheel Bolt Bore Diameter [mm]: 15,4
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 19,4
- Inner Diameter [mm]: 180
- Tightening Torque [Nm]: 130
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: without bolts / screws
- Drilled: no
- Item number: SKBD-0022011
- Manufacturer: STARK
- EAN number: 4059191064830
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Rear Axle
- Construction Year from: 03 / 2010
- Diameter [mm]: 300
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22
- Height [mm]: 68
- Surface: Oiled
- Centering Diameter [mm]: 67
- Number of Holes: 5
- Minimum thickness [mm]: 19,4
- Test Mark: E1 90R-02C0957 / 2557
- Drilled: no
- Item number: BG3758
- Manufacturer: DELPHI
- EAN number: 5012759280553
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Rear Axle
- Braking System: not for vehicles with reinforced brakes
- Diameter [mm]: 300
- Brake Disc Type: solid
- Product line: COAT Z
- Brake Disc Thickness [mm]: 10
- Height [mm]: 68
- Surface: Coated
- Centering Diameter [mm]: 67
- Rim Hole Number: 5
- Hole Arrangement / Number: 6 / 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 8,3
- Weight [kg]: 5,1
- Machining: High-carbon
- Test Mark: ECE R90 APPROVED
- Drilled: no
- Item number: 400.3621.20
- Manufacturer: ZIMMERMANN
- EAN number: 4250238719229
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Rear Axle
- Braking System: not for vehicles with reinforced brakes
- Diameter [mm]: 300
- Brake Disc Type: solid
- Product line: PRO
- Brake Disc Thickness [mm]: 10
- Height [mm]: 68,3
- Surface: Coated
- Centering Diameter [mm]: 67,1
- Hole Arrangement / Number: 05 / 06
- Wheel Bolt Bore Diameter [mm]: 15,3
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 8,3
- Inner Diameter [mm]: 180
- Weight [kg]: 5,2
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Assy. / disassy. by qualified personnel required!
- Drilled: no
- Item number: 8DD 355 108-841
- Manufacturer: HELLA
- EAN number: 4082300373509
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: internally vented
- Brake Disc Thickness [mm]: 22
- Surface: Coated
- Centering Diameter [mm]: 67
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 65,6
- Minimum thickness [mm]: 20,5
- Weight [kg]: 7,4
- Number of mounting bores: 1
- Drilled: no
- Item number: 10 92 2162
- Manufacturer: SWAG
- EAN number: 4044688529992
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 295
- Brake Disc Type: Vented
- Supplementary Info: Original VAICO Quality
- Brake Disc Thickness [mm]: 28
- Height [mm]: 64,5
- Centering Diameter [mm]: 67
- Number of Holes: 5
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 25,4
- Weight [kg]: 9,358
- TecDoc Engine Number: OM 642.852
- Brake Disc Hub Height [mm]: 36,5
- Packaging width [cm]: 30
- Packaging height [cm]: 13
- Packaging Depth [cm]: 30
- fulfils ECE norm: R90
- Drilled: no
- Item number: V30-80008
- Manufacturer: VAICO
- EAN number: 4046001446597
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: internally vented
- Brake Disc Thickness [mm]: 22
- Surface: Coated
- Centering Diameter [mm]: 67
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 65,6
- Minimum thickness [mm]: 20,5
- Weight [kg]: 7,4
- Number of mounting bores: 1
- Observe service information
- Drilled: no
- Item number: 22162
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816221623
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: Vented
- Supplementary Info: Original VAICO Quality
- Brake Disc Thickness [mm]: 22
- Height [mm]: 68
- Centering Diameter [mm]: 67
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 19,4
- Weight [kg]: 7,86
- Brake Disc Hub Height [mm]: 46,2
- Packaging width [cm]: 32
- Packaging height [cm]: 15
- Packaging Depth [cm]: 32
- fulfils ECE norm: R90
- Drilled: no
- Item number: V30-80050
- Manufacturer: VAICO
- EAN number: 4046001311918
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Rear Axle
- Braking System: not for vehicles with reinforced brakes
- Diameter [mm]: 300
- Brake Disc Type: solid
- Product line: PRO+
- Brake Disc Thickness [mm]: 10
- Height [mm]: 68,3
- Surface: Coated
- Centering Diameter [mm]: 67,1
- Hole Arrangement / Number: 05 / 06
- Wheel Bolt Bore Diameter [mm]: 15,3
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 8,3
- Inner Diameter [mm]: 180
- Weight [kg]: 5,2
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Packaging length [cm]: 30,8
- Packaging width [cm]: 30,8
- Packaging height [cm]: 16
- Drilled: no
- Item number: 92115405
- Manufacturer: TEXTAR
- EAN number: 4019722287244
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Rear Axle
- Brake System: ATE
- Diameter [mm]: 300
- Brake Disc Type: internally vented
- Product line: COATED DISC LINE
- Brake Disc Thickness [mm]: 22
- Height [mm]: 68
- Surface: Coated
- Centering Diameter [mm]: 67
- Number of Holes: 5
- Minimum thickness [mm]: 19,4
- Tightening Torque [Nm]: 130
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 09.A358.11
- Manufacturer: BREMBO
- EAN number: 8020584034743
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: internally vented
- Product line: PRO
- Brake Disc Thickness [mm]: 22
- Height [mm]: 68,2
- Surface: Coated
- Centering Diameter [mm]: 67
- Hole Arrangement / Number: 05 / 06
- Wheel Bolt Bore Diameter [mm]: 15,3
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 19,4
- Inner Diameter [mm]: 180
- Weight [kg]: 7
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Assy. / disassy. by qualified personnel required!
- Drilled: no
- Item number: 8DD 355 108-861
- Manufacturer: HELLA
- EAN number: 4082300373523
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: internally vented
- Brake Disc Thickness [mm]: 22
- Surface: Coated
- Centering Diameter [mm]: 67
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 66
- Minimum thickness [mm]: 20,5
- Weight [kg]: 7,4
- Number of mounting bores: 1
- Observe service information
- Drilled: no
- Item number: ADU174301
- Manufacturer: BLUE PRINT
- EAN number: 5050063006056
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
-
- Construction Year from: 07 / 2010
- Construction Year to: 08 / 2016
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22
- Height [mm]: 68,2
- Surface: Coated
- Centering Diameter [mm]: 67
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 19,4
- Machining: Alloyed / High-carbon
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 15,3
- Drilled: no
- Item number: 0 986 479 042
- Manufacturer: BOSCH
- EAN number: 4047024201040
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 10
- Surface: Coated
- Number of Holes: 5
- Braking System: not for vehicles with reinforced brakes
- Drilled: no
- Item number: 1363202900
- Manufacturer: JP GROUP
- EAN number: 5710412609771
- Condition: New
price incl. 19% VAT
excl. delivery costs
- 1
- 2
- 3
- 4
- 5
How much will brake disc replacement cost for my MERCEDES-BENZ E-Class T-modell (S212) E300CDI / BlueTEC (212.227, 212.221) 231hp / 170kW?
The cost of replacing brake discs ranges from 140 to 400 pounds