Vehicle identification number: 0710374
Mercedes S202 C 43 AMG 4.3 Brake discs (306 hp Petrol M 113.944)
Recommended part replacement interval for your car for the part category Brake discs: every 50.000 km
- Diameter [mm]: 330
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 28
- Fitting Position: Front Axle
- Height [mm]: 46,5
- Surface: Coated
- Centering Diameter [mm]: 67
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 26
- Tightening Torque [Nm]: 110
- Bore Diameter [mm]: 13,0
- Supplementary Article / Supplementary Info Info 2: without bolts / screws
- Drilled: no
- Item number: 82B0621
- Manufacturer: RIDEX
- EAN number: 4059191135738
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 300
- Brake Disc Type: internally vented
- Brake Disc Thickness [mm]: 22
- Fitting Position: Rear Axle
- Height [mm]: 55,4
- Surface: Coated
- Centering Diameter [mm]: 67
- Hole Arrangement / Number: 05 / 06
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 19,4
- Inner Diameter [mm]: 164,0
- Weight [kg]: 7,1
- Bore Diameter [mm]: 13,2
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel studs
- Drilled: no
- Item number: 82B0846
- Manufacturer: RIDEX
- EAN number: 4059191138128
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 300
- Brake Disc Type: internally vented
- Product line: COATED DISC LINE
- Brake Disc Thickness [mm]: 22
- Fitting Position: Rear Axle
- Height [mm]: 56
- Surface: Coated
- Centering Diameter [mm]: 67
- Number of Holes: 5
- Minimum thickness [mm]: 19,4
- Tightening Torque [Nm]: 110
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 09.A742.11
- Manufacturer: BREMBO
- EAN number: 8020584019863
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year from: 09 / 1997
- Fitting Position: Rear Axle
- Diameter [mm]: 300,0
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22,0
- Height [mm]: 55,3
- Surface: Coated
- Centering Diameter [mm]: 67,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112,0
- Minimum thickness [mm]: 19,4
- Inner Diameter [mm]: 164,0
- Machining: Alloyed / High-carbon
- MAPP code available
- Test Mark: E1 90R-02C0296 / 0783
- Bore Diameter [mm]: 13,2
- Drilled: no
- Item number: 24.0122-0228.1
- Manufacturer: ATE
- EAN number: 4006633222228
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 300
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22
- Fitting Position: Rear Axle
- Height [mm]: 58,5
- Surface: Oiled
- Centering Diameter [mm]: 67
- Number of Holes: 5
- Minimum thickness [mm]: 19,4
- Test Mark: E1 90R-02C0438 / 1623
- Drilled: no
- Item number: BG3726
- Manufacturer: DELPHI
- EAN number: 5012759285060
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year to: 02 / 2001
- Fitting Position: Rear Axle
- Diameter [mm]: 300,1
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22
- Height [mm]: 55,4
- Surface: Coated
- Centering Diameter [mm]: 67
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 19,4
- Machining: Alloyed / High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 13,2
- Drilled: no
- Item number: 0 986 479 653
- Manufacturer: BOSCH
- EAN number: 4047024749412
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 300
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22
- Fitting Position: Rear Axle
- Height [mm]: 55,3
- Surface: Painted
- Centering Diameter [mm]: 67
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 19,4
- Thread Size: 13,25
- Colour: black
- Test Mark: E1 90R-02 C0226 / 0199
- Drum diameter [mm]: 164
- Drilled: no
- Item number: DF4355
- Manufacturer: TRW
- EAN number: 3322937402663
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 334
- Brake Disc Type: Vented, two-part brake disc, floating brake disc, Aluminium Brake Disc Hub
- Product line: FORMULA Z COAT Z
- Brake Disc Thickness [mm]: 32
- Fitting Position: Front Axle Right
- Height [mm]: 48
- Surface: Coated
- Centering Diameter [mm]: 67
- Rim Hole Number: 5
- Hole Arrangement / Number: 6 / 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 30,4
- Weight [kg]: 9,8
- Machining: Alloyed / High-carbon
- paired article number: 400.3668.75
- directional
- Drilled: no
- Item number: 400.3669.75
- Manufacturer: ZIMMERMANN
- EAN number: 4250238746218
- Condition: New
price incl. 19% VAT
- Diameter [mm]: 334
- Brake Disc Type: Vented, two-part brake disc, floating brake disc, Aluminium Brake Disc Hub
- Product line: FORMULA Z COAT Z
- Brake Disc Thickness [mm]: 32
- Fitting Position: Front Axle Left
- Height [mm]: 48
- Surface: Coated
- Centering Diameter [mm]: 67
- Rim Hole Number: 5
- Hole Arrangement / Number: 6 / 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 30,4
- Weight [kg]: 9,6
- Machining: Alloyed / High-carbon
- paired article number: 400.3669.75
- directional
- Drilled: no
- Item number: 400.3668.75
- Manufacturer: ZIMMERMANN
- EAN number: 4250238746201
- Condition: New
price incl. 19% VAT
- Diameter [mm]: 300
- Brake Disc Type: internally vented
- Brake Disc Thickness [mm]: 22
- Fitting Position: Rear Axle
- Surface: Coated
- Centering Diameter [mm]: 67
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 54
- Minimum thickness [mm]: 19,4
- Weight [kg]: 6,926
- Number of mounting bores: 1
- Observe service information
- Drilled: no
- Item number: ADA104330
- Manufacturer: BLUE PRINT
- EAN number: 5050063628418
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 300
- Brake Disc Type: internally vented
- Brake Disc Thickness [mm]: 22
- Fitting Position: Rear Axle
- Surface: Coated
- Centering Diameter [mm]: 67
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 53,5
- Minimum thickness [mm]: 19,4
- Weight [kg]: 6,926
- Number of mounting bores: 1
- Observe service information
- Drilled: no
- Item number: 23212
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816232124
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 278
- Brake Disc Type: solid
- Supplementary Info: Original VAICO Quality
- Brake Disc Thickness [mm]: 9
- Fitting Position: Rear Axle
- Height [mm]: 55,3
- Centering Diameter [mm]: 67
- Number of Holes: 6
- Rim Hole Number: 5
- Bore Diameter 2 [mm]: 9,2
- Bore Diameter 1 [mm]: 13,3
- Bolt Hole Circle Ø [mm]: 112
- Hub Diameter 1 [mm]: 67
- Minimum thickness [mm]: 7,3
- Inner Diameter [mm]: 164
- Weight [kg]: 4,521
- fulfils ECE norm: R90
- Packaging width [cm]: 32
- Packaging height [cm]: 12
- Packaging Depth [cm]: 32
- Drilled: no
- Item number: V30-80059
- Manufacturer: VAICO
- EAN number: 4046001349553
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Diameter [mm]: 300
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22
- Fitting Position: Rear Axle
- Height [mm]: 55,4
- Surface: Coated
- Centering Diameter [mm]: 67
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 19,4
- Hub Diameter [mm]: 168
- Weight [kg]: 7,06
- Drilled: no
- Item number: 17401
- Manufacturer: A.B.S.
- EAN number: 8717109254709
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 300
- Brake Disc Type: Vented
- Construction Year to: 05 / 2000
- Supplementary Info: Original VAICO Quality
- Brake Disc Thickness [mm]: 22
- Fitting Position: Rear Axle
- Height [mm]: 58,5
- Centering Diameter [mm]: 67
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 19,4
- Weight [kg]: 7,176
- Machining: Alloyed / High-carbon
- Brake Disc Hub Height [mm]: 37
- Packaging width [cm]: 32
- Packaging height [cm]: 13
- Packaging Depth [cm]: 32
- Drilled: no
- Item number: V30-80060
- Manufacturer: VAICO
- EAN number: 4046001349560
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Diameter [mm]: 300
- Brake Disc Type: internally vented
- Product line: PRO
- Brake Disc Thickness [mm]: 22
- Fitting Position: Rear Axle
- Height [mm]: 55,4
- Surface: Coated
- Centering Diameter [mm]: 67
- Hole Arrangement / Number: 05 / 06
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 19,4
- Weight [kg]: 7,1
- Technical Information Number: 54372PRO
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel studs
- Assy. / disassy. by qualified personnel required!
- Drilled: no
- Item number: 8DD 355 111-851
- Manufacturer: HELLA
- EAN number: 4082300376517
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 300
- Brake Disc Type: internally vented
- Product line: COAT Z
- Brake Disc Thickness [mm]: 22
- Fitting Position: Rear Axle
- Height [mm]: 56
- Surface: Coated
- Centering Diameter [mm]: 67
- Rim Hole Number: 5
- Hole Arrangement / Number: 6 / 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 19,4
- Weight [kg]: 7
- Machining: High-carbon
- Test Mark: ECE R90 APPROVED
- Drilled: no
- Item number: 400.3645.20
- Manufacturer: ZIMMERMANN
- EAN number: 4250238719281
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 300
- Brake Disc Type: Vented
- Product line: PREMIER
- Brake Disc Thickness [mm]: 22
- Fitting Position: Rear Axle
- Height [mm]: 55,2
- Surface: Oiled
- Centering Diameter [mm]: 67
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 19,4
- Weight [kg]: 14,15
- Tightening Torque [Nm]: 110
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Packing Type: Box
- Packaging length [cm]: 30
- Packaging width [cm]: 30
- Packaging height [cm]: 11
- Drilled: no
- Item number: DDF1764
- Manufacturer: FERODO
- EAN number: 4044197515424
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 330
- Brake Disc Type: Vented
- Product line: PREMIER Coat+ disc
- Brake Disc Thickness [mm]: 28
- Fitting Position: Front Axle
- Height [mm]: 46,5
- Surface: Coated
- Centering Diameter [mm]: 67
- Number of Holes: 5
- Minimum thickness [mm]: 26
- Weight [kg]: 5,17
- Tightening Torque [Nm]: 110
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Packaging length [cm]: 33
- Packaging width [cm]: 33
- Packaging height [cm]: 9,4
- Drilled: no
- Item number: DDF1856C-1
- Manufacturer: FERODO
- EAN number: 4044197589944
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 334
- Brake Disc Type: Vented, two-part brake disc
- Product line: COATED
- Brake Disc Thickness [mm]: 32
- Fitting Position: Front Axle Right, Right
- Height [mm]: 48
- Surface: Coated
- Centering Diameter [mm]: 67
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 30,4
- Weight [kg]: 10,36
- paired article number: 17477
- Drilled: no
- Item number: 17478
- Manufacturer: A.B.S.
- EAN number: 8717109256413
- Condition: New
price incl. 19% VAT
- Diameter [mm]: 334
- Brake Disc Type: internally vented, two-part brake disc, Smooth
- Brake Disc Thickness [mm]: 32
- Fitting Position: Front Axle, Right, Front Axle Right
- Surface: Coated
- Minimum thickness [mm]: 30,4
- Weight [kg]: 9,7
- Machining: High-carbon
- Test Mark: ECE R90 APPROVED
- paired article number: TFL42103
- Drilled: no
- Item number: TFR42104
- Manufacturer: SHW Performance
- EAN number: 0048544884175
- Condition: New
price incl. 19% VAT
- 1
- 2
- 3
- 4
How much will brake disc replacement cost for my MERCEDES-BENZ C-Class T-modell (S202) C43AMG (202.093) 306hp / 225kW?
The cost of replacing brake discs ranges from 140 to 400 pounds