Vehicle identification number: 0009371
MERCEDES-BENZ /8 (W115) Saloon 200 D 2.0 Brake discs (55 hp Diesel OM 615.913)
Recommended part replacement interval for your car for the part category Brake discs: every 50.000 km
- Fitting Position: Rear Axle
- Diameter [mm]: 279
- Brake Disc Type: solid
- Drilled: no
- Surface: Oiled
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Brake Disc Thickness [mm]: 10
- Height [mm]: 72
- Centering Diameter [mm]: 67
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 8,3
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 15,5
- Item number: 0 986 478 199
- Manufacturer: BOSCH
- EAN number: 4047024199170
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 273
- Construction Year to: 01 / 1976
- Construction Year from: 08 / 1971
- Brake Disc Type: solid
- Drilled: no
- Supplementary Info: Original VAICO Quality
- Brake Disc Thickness [mm]: 12,6
- Height [mm]: 63,3
- Centering Diameter [mm]: 80
- Rim Hole Number: 5
- Bore Diameter 1 [mm]: 15
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 11
- Weight [kg]: 5,053
- Brake Disc Hub Height [mm]: 50,4
- Packaging width [cm]: 27,4
- Packaging height [cm]: 6,5
- Packaging Depth [cm]: 27,6
- Item number: V30-40004
- Manufacturer: VAICO
- EAN number: 4046001169557
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Front Axle
- Diameter [mm]: 273
- Vehicle Identification Number (VIN) to: ***********105289
- Brake Disc Type: solid
- Drilled: no
- Surface: Coated
- Brake Disc Thickness [mm]: 12,7
- Centering Diameter [mm]: 69,6
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 63
- Minimum thickness [mm]: 10,6
- Weight [kg]: 5,27
- Number of mounting bores: 5
- Observe service information
- Item number: ADU174320
- Manufacturer: BLUE PRINT
- EAN number: 5050063309768
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 273
- Vehicle Identification Number (VIN) from: ***********105290
- Brake Disc Type: solid
- Drilled: no
- Surface: Coated
- Brake Disc Thickness [mm]: 12,7
- Centering Diameter [mm]: 80
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 63
- Minimum thickness [mm]: 10,6
- Weight [kg]: 5,24
- Observe service information
- Item number: 08540
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816085409
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle, Front Axle
- Diameter [mm]: 273
- Brake Disc Type: solid
- Drilled: no
- Supplementary Info: Original VAICO Quality
- Brake Disc Thickness [mm]: 12,6
- Height [mm]: 63,3
- Centering Diameter [mm]: 69,5
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 11
- Weight [kg]: 5,901
- Brake Disc Hub Height [mm]: 50,5
- Packaging width [cm]: 28
- Packaging height [cm]: 13
- Packaging Depth [cm]: 28
- Item number: V30-40003
- Manufacturer: VAICO
- EAN number: 4046001169540
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Rear Axle
- Diameter [mm]: 279
- Brake Disc Type: solid
- Drilled: no
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Brake Disc Thickness [mm]: 10
- Height [mm]: 71,8
- Centering Diameter [mm]: 67
- Hole Arrangement / Number: 05 / 07
- Wheel Bolt Bore Diameter [mm]: 15,3
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 8,3
- Inner Diameter [mm]: 160
- Weight [kg]: 4,3
- Packaging length [cm]: 29,3
- Packaging width [cm]: 29,3
- Packaging height [cm]: 16,5
- Item number: 92032600
- Manufacturer: TEXTAR
- EAN number: 4019722110221
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 273
- Vehicle Identification Number (VIN) to: 105289
- Brake Disc Type: solid
- Drilled: no
- Surface: Oiled
- Brake Disc Thickness [mm]: 12,6
- Height [mm]: 63,5
- Centering Diameter [mm]: 69,6
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 11
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 15
- Item number: 0 986 478 055
- Manufacturer: BOSCH
- EAN number: 4047024199071
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 273
- Brake Disc Type: solid
- Drilled: no
- Brake Disc Thickness [mm]: 12,7
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- for OE number: 115 421 1112
- Item number: 02.35.045
- Manufacturer: TRUCKTEC AUTOMOTIVE
- EAN number: 4038081169350
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 279
- Construction Year to: 12 / 1976
- Brake Disc Type: solid
- Drilled: no
- Surface: Coated
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Brake Disc Thickness [mm]: 10,0
- Height [mm]: 71,7
- Centering Diameter [mm]: 67,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112,0
- Minimum thickness [mm]: 8,3
- Inner Diameter [mm]: 160,0
- MAPP code available
- Test Mark: E1 90R-02C0248 / 0678
- Bore Diameter [mm]: 15,0
- Item number: 24.0110-0185.1
- Manufacturer: ATE
- EAN number: 4006633062978
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 273
- Vehicle Identification Number (VIN) from: 105290
- Brake Disc Type: solid
- Drilled: no
- Surface: Coated
- Brake Disc Thickness [mm]: 12,6
- Number of Holes: 5
- Item number: 1363105700
- Manufacturer: JP GROUP
- EAN number: 5710412608101
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 279
- Brake Disc Type: solid
- Drilled: no
- Brake Disc Thickness [mm]: 10
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- for OE number: 126 423 0012
- Item number: 02.35.020
- Manufacturer: TRUCKTEC AUTOMOTIVE
- EAN number: 4038081081126
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 273
- Vehicle Identification Number (VIN) to: ***********105289
- Brake Disc Type: solid
- Drilled: no
- Surface: Coated
- Brake Disc Thickness [mm]: 12,7
- Centering Diameter [mm]: 69,6
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 63,3
- Minimum thickness [mm]: 10,6
- Weight [kg]: 5,27
- Number of mounting bores: 5
- Item number: 10 90 8541
- Manufacturer: SWAG
- EAN number: 4044688523266
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 273,3
- Vehicle Identification Number (VIN) from: 105290
- Brake Disc Type: solid
- Drilled: no
- Surface: Oiled
- Brake Disc Thickness [mm]: 12,6
- Height [mm]: 63,5
- Centering Diameter [mm]: 80
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 11
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 15
- Item number: 0 986 478 057
- Manufacturer: BOSCH
- EAN number: 4047024188020
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 279
- Brake Disc Type: solid
- Drilled: no
- Surface: Painted
- Brake Disc Thickness [mm]: 10
- Height [mm]: 71,7
- Centering Diameter [mm]: 67
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 8,3
- Thread Size: 15
- Colour: black
- Test Mark: E190R-02C0204 / 0525
- Drum diameter [mm]: 160
- Item number: DF1574
- Manufacturer: TRW
- EAN number: 3322936157403
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 273,5
- Construction Year to: 12 / 1976
- Vehicle Identification Number (VIN) from: 105290
- Brake Disc Type: solid
- Drilled: no
- Surface: Coated
- Brake Disc Thickness [mm]: 12,6
- Height [mm]: 63,3
- Centering Diameter [mm]: 80,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112,0
- Minimum thickness [mm]: 11,0
- Inner Diameter [mm]: 127,5
- MAPP code available
- Test Mark: E1 90R-02C0165 / 0614
- Bore Diameter [mm]: 15,0
- Item number: 24.0113-0113.1
- Manufacturer: ATE
- EAN number: 4006633056038
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 279
- Brake Disc Type: solid
- Drilled: no
- Surface: Coated
- Brake Disc Thickness [mm]: 10
- Number of Holes: 5
- Item number: 1363102100
- Manufacturer: JP GROUP
- EAN number: 5710412524753
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 273
- Vehicle Identification Number (VIN) from: ***********105290
- Brake Disc Type: solid
- Drilled: no
- Surface: Coated
- Brake Disc Thickness [mm]: 12,7
- Centering Diameter [mm]: 80
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 63,4
- Minimum thickness [mm]: 10,6
- Weight [kg]: 5,24
- Item number: 10 90 8540
- Manufacturer: SWAG
- EAN number: 4044688523259
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 273,0
- Vehicle Identification Number (VIN) to: 105289
- Brake Disc Type: solid
- Drilled: no
- Surface: Coated
- Brake Disc Thickness [mm]: 12,6
- Height [mm]: 63,3
- Centering Diameter [mm]: 69,5
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112,0
- Minimum thickness [mm]: 11,0
- Inner Diameter [mm]: 127,5
- MAPP code available
- Test Mark: E1 90R-02C0165 / 0615
- Bore Diameter [mm]: 15,0
- Item number: 24.0113-0112.1
- Manufacturer: ATE
- EAN number: 4006633056014
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle, Front Axle
- Diameter [mm]: 279, 240
- Brake Disc Type: solid
- Drilled: no
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel studs
- Brake Disc Thickness [mm]: 10
- Height [mm]: 72
- Centering Diameter [mm]: 67
- Hole Arrangement / Number: 05 / 07
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 8
- Weight [kg]: 4
- Technical Information Number: 98200 0326 0 1
- Component Number: BSG 60-210-020
- Packaging length [cm]: 32
- Packaging width [cm]: 30
- Packaging height [cm]: 16
- Item number: BSG 60-210-020
- Manufacturer: BSG
- EAN number: 8719822053621
- Condition: New
price incl. 19% VAT
- Fitting Position: Rear Axle
- Diameter [mm]: 279
- Construction Year to: 12 / 1976
- Brake Disc Type: solid
- Drilled: no
- Surface: Coated
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Brake Disc Thickness [mm]: 10
- Height [mm]: 69,5
- Centering Diameter [mm]: 67
- Hole Arrangement / Number: 5 / 7
- Minimum thickness [mm]: 8,3
- Item number: BS-2800C
- Manufacturer: OPTIMAL
- EAN number: 4058787135978
- Condition: New
price incl. 19% VAT
- 1
- 2
- 3
- 4
- 5
How much will brake disc replacement cost for my MERCEDES-BENZ /8 (W115) Saloon 200D (115.115) 55hp / 40kW?
The cost of replacing brake discs ranges from 140 to 400 pounds