Vehicle identification number: 2143AAY
Land Rover Discovery LA 3.0 TD 4x4 Brake discs (245 hp Diesel 306DT(TDV6))
Recommended part replacement interval for your car for the part category Brake discs: every 50.000 km
-
- Vehicle Identification Number (VIN) from: *********DA000001
- Spring Type: for vehicles with air suspension
- Diameter [mm]: 360
- Brake Disc Type: internally vented
- Brake Disc Thickness [mm]: 30
- Fitting Position: Front Axle
- Surface: Coated
- Centering Diameter [mm]: 79
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 120
- Thickness [mm]: 62,1
- Minimum thickness [mm]: 27
- Weight [kg]: 12,06
- Machining: High-carbon
- Number of mounting bores: 2
- Observe service information
- Drilled: no
- Item number: 43930
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816439301
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
-
- Special Purpose Vehicle: not for armoured vehicles
- Spring Type: for vehicles with air suspension
- Fitting Position: Rear Axle
- Diameter [mm]: 350
- Brake Disc Type: Externally Vented, Perforated
- Product line: SPORT COAT Z
- Brake Disc Thickness [mm]: 20
- Height [mm]: 60
- Surface: Coated
- Centering Diameter [mm]: 79
- Rim Hole Number: 5
- Hole Arrangement / Number: 7 / 5
- Bolt Hole Circle Ø [mm]: 120
- Minimum thickness [mm]: 17
- Weight [kg]: 8,9
- Machining: High-carbon
- Test Mark: ohne ABE
- Drilled: yes
- Item number: 450.5203.52
- Manufacturer: ZIMMERMANN
- EAN number: 4250238778790
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle
- Shock Absorber System: Normal Suspension
- Diameter [mm]: 317
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 30
- Height [mm]: 62
- Surface: Painted
- Centering Diameter [mm]: 79
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 120
- Minimum thickness [mm]: 27
- Machining: High-carbon
- Thread Size: 15
- Colour: black
- Test Mark: E1 90R-02 C0176 / 0687
- Drilled: no
- Item number: DF4790
- Manufacturer: TRW
- EAN number: 3322937570164
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Special Purpose Vehicle: not for armoured vehicles
- Fitting Position: Rear Axle
- Diameter [mm]: 350,0
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 20,0
- Height [mm]: 59
- Surface: Coated
- Centering Diameter [mm]: 79,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 120,0
- Minimum thickness [mm]: 17,0
- Inner Diameter [mm]: 210,0
- Machining: Alloyed / High-carbon
- MAPP code available
- Test Mark: E1 90R-02C0234 / 1321
- Bore Diameter [mm]: 15,0
- Drilled: no
- Item number: 24.0120-0201.1
- Manufacturer: ATE
- EAN number: 4006633306737
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle
- Vehicle Identification Number (VIN) to: AA222221
- Diameter [mm]: 360
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 30
- Height [mm]: 62
- Surface: Painted
- Centering Diameter [mm]: 79
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 120
- Minimum thickness [mm]: 27
- Machining: High-carbon
- Thread Size: 15
- Colour: black
- Test Mark: E190R-02C0176 / 0584
- Drilled: no
- Item number: DF4792S
- Manufacturer: TRW
- EAN number: 3322937735235
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 325,0
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 20
- Fitting Position: Rear Axle
- Height [mm]: 59
- Surface: Painted
- Centering Diameter [mm]: 79
- Hole Arrangement / Number: 5 / 7
- Bolt Hole Circle Ø [mm]: 120
- Minimum thickness [mm]: 17
- Inner Diameter [mm]: 210,0
- Machining: High-carbon
- Thread Size: 15
- Bore Diameter up to [mm]: 15
- Drilled: no
- Item number: SKBD-0023194
- Manufacturer: STARK
- EAN number: 4059191145737
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 325
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 20
- Height [mm]: 59
- Surface: Coated
- Centering Diameter [mm]: 79
- Number of Holes: 5
- Hole Arrangement / Number: 5+1+1
- Bolt Hole Circle Ø [mm]: 120
- Minimum thickness [mm]: 17
- Weight [kg]: 15,91
- Tightening Torque [Nm]: 140
- Version: JC
- Supplementary Article / Supplementary Info Info 2: without bolts / screws
- Packing Type: Box
- Packaging length [cm]: 34,5
- Packaging width [cm]: 34,5
- Packaging height [cm]: 14
- Drilled: no
- Item number: 562653JC
- Manufacturer: JURID
- EAN number: 3306437229272
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle
- Special Purpose Vehicle: not for armoured vehicles
- Diameter [mm]: 360
- Brake Disc Type: Vented
- Product line: PREMIER
- Brake Disc Thickness [mm]: 30
- Height [mm]: 62
- Surface: Coated
- Centering Diameter [mm]: 79
- Number of Holes: 5
- Minimum thickness [mm]: 27
- Weight [kg]: 24,84
- Tightening Torque [Nm]: 140
- Supplementary Article / Supplementary Info Info 2: without bolts / screws
- Packaging length [cm]: 36
- Packaging width [cm]: 36
- Packaging height [cm]: 6
- Drilled: no
- Item number: DDF1434C-1
- Manufacturer: FERODO
- EAN number: 4044197972418
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle
- Vehicle Identification Number (VIN) to: AA222221
- Diameter [mm]: 360
- Brake Disc Type: internally vented
- Product line: COAT Z
- Brake Disc Thickness [mm]: 30
- Height [mm]: 62
- Surface: Coated
- Centering Diameter [mm]: 79
- Rim Hole Number: 5
- Hole Arrangement / Number: 6 / 5
- Bolt Hole Circle Ø [mm]: 120
- Minimum thickness [mm]: 27
- Weight [kg]: 12,4
- Machining: High-carbon
- Test Mark: ECE R90 APPROVED
- Drilled: no
- Item number: 450.5202.20
- Manufacturer: ZIMMERMANN
- EAN number: 4250238756729
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 350
- Brake Disc Type: internally vented
- Brake Disc Thickness [mm]: 20
- Fitting Position: Rear Axle
- Surface: Coated
- Centering Diameter [mm]: 79
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 120
- Thickness [mm]: 59
- Minimum thickness [mm]: 17
- Weight [kg]: 9,26
- Machining: High-carbon
- Number of mounting bores: 1
- Observe service information
- Drilled: no
- Item number: 43845
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816438458
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Rear Axle
- Special Purpose Vehicle: not for armoured vehicles
- Suspension: for vehicles with height-adjustable suspension
- Diameter [mm]: 350
- Brake Disc Type: Externally Vented
- Product line: PRO
- Brake Disc Thickness [mm]: 20
- Height [mm]: 59
- Surface: Coated
- Centering Diameter [mm]: 79
- Hole Arrangement / Number: 05 / 07
- Bolt Hole Circle Ø [mm]: 120
- Minimum thickness [mm]: 17
- Weight [kg]: 8,8
- Technical Information Number: 54477PRO
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel studs
- Assy. / disassy. by qualified personnel required!
- Drilled: no
- Item number: 8DD 355 118-781
- Manufacturer: HELLA
- EAN number: 4082300494044
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Vehicle Identification Number (VIN) from: DA000001
- Spring Type: for vehicles with air suspension
- Diameter [mm]: 360
- Brake Disc Type: Vented
- Supplementary Info: Original VAICO Quality
- Brake Disc Thickness [mm]: 30
- Fitting Position: Front Axle
- Height [mm]: 62
- Centering Diameter [mm]: 79
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 120
- Minimum thickness [mm]: 27
- Brake Disc Hub Height [mm]: 32
- Packaging width [cm]: 36
- Packaging height [cm]: 6,5
- Packaging Depth [cm]: 36,3
- Drilled: no
- Item number: V48-80009
- Manufacturer: VAICO
- EAN number: 4046001767456
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Rear Axle
- Shock Absorber System: Normal Suspension
- Diameter [mm]: 325
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 20
- Height [mm]: 59
- Surface: Painted
- Centering Diameter [mm]: 79
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 120
- Minimum thickness [mm]: 17
- Machining: High-carbon
- Thread Size: 15
- Colour: black
- Drilled: no
- Item number: DF4794
- Manufacturer: TRW
- EAN number: 3322937735341
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle
- Special Purpose Vehicle: not for armoured vehicles
- Suspension: for vehicles with height-adjustable suspension
- Diameter [mm]: 360
- Brake Disc Type: internally vented
- Brake Disc Thickness [mm]: 30
- Height [mm]: 62
- Surface: Coated
- Centering Diameter [mm]: 79
- Hole Arrangement / Number: 05 / 06
- Wheel Bolt Bore Diameter [mm]: 15
- Bolt Hole Circle Ø [mm]: 120
- Minimum thickness [mm]: 27
- Inner Diameter [mm]: 174,8
- Weight [kg]: 12
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Packaging length [cm]: 37,3
- Packaging width [cm]: 37,3
- Packaging height [cm]: 10,5
- Drilled: no
- Item number: 92162005
- Manufacturer: TEXTAR
- EAN number: 4019722474163
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Spring Type: for vehicles without air suspension
- Fitting Position: Rear Axle
- Special Purpose Vehicle: not for armoured vehicles
- Diameter [mm]: 325
- Brake Disc Type: Externally Vented, Perforated
- Product line: SPORT COAT Z
- Brake Disc Thickness [mm]: 20
- Height [mm]: 60
- Surface: Coated
- Centering Diameter [mm]: 79
- Rim Hole Number: 5
- Hole Arrangement / Number: 7 / 5
- Bolt Hole Circle Ø [mm]: 120
- Minimum thickness [mm]: 17
- Weight [kg]: 7,7
- Machining: High-carbon
- Test Mark: KBA 60872
- Drilled: yes
- Item number: 450.5209.52
- Manufacturer: ZIMMERMANN
- EAN number: 4250238763871
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 360
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 30
- Fitting Position: Front Axle
- Height [mm]: 62
- Surface: Coated
- Centering Diameter [mm]: 79
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 120
- Minimum thickness [mm]: 27
- Hub Diameter [mm]: 187
- Weight [kg]: 12,06
- Drilled: no
- Item number: 17720
- Manufacturer: A.B.S.
- EAN number: 8717109480818
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 325
- Brake Disc Type: Vented
- Product line: PREMIER Coat+ disc
- Brake Disc Thickness [mm]: 20
- Height [mm]: 59
- Surface: Coated
- Centering Diameter [mm]: 79
- Number of Holes: 5
- Minimum thickness [mm]: 17
- Weight [kg]: 7,96
- Tightening Torque [Nm]: 140
- Supplementary Article / Supplementary Info Info 2: without bolts / screws
- Packaging length [cm]: 32
- Packaging width [cm]: 32
- Packaging height [cm]: 14
- Drilled: no
- Item number: DDF1431C
- Manufacturer: FERODO
- EAN number: 4044197845330
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Rear Axle
- Alternatively
- Diameter [mm]: 350
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 20
- Height [mm]: 59,4
- Surface: Coated
- Centering Diameter [mm]: 79
- Number of Holes: 5
- Minimum thickness [mm]: 17
- Test Mark: E1 90R-02C0460 / 1469
- Drilled: no
- Item number: BG3925C
- Manufacturer: DELPHI
- EAN number: 5012759529898
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 350
- Brake Disc Type: Vented
- Supplementary Info: Original VAICO Quality
- Brake Disc Thickness [mm]: 20
- Fitting Position: Front Axle
- Height [mm]: 59
- Centering Diameter [mm]: 79
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 120
- Minimum thickness [mm]: 17
- Special Purpose Vehicle: not for armoured vehicles
- Brake Disc Hub Height [mm]: 39,5
- Packaging width [cm]: 35
- Packaging height [cm]: 6
- Packaging Depth [cm]: 35
- Drilled: no
- Item number: V48-80005
- Manufacturer: VAICO
- EAN number: 4046001767425
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Rear Axle
- Special Purpose Vehicle: not for armoured vehicles
- Suspension: for vehicles with height-adjustable suspension
- Diameter [mm]: 350
- Brake Disc Type: Externally Vented
- Product line: PRO
- Brake Disc Thickness [mm]: 20
- Height [mm]: 59
- Surface: Coated
- Centering Diameter [mm]: 79
- Hole Arrangement / Number: 05 / 07
- Wheel Bolt Bore Diameter [mm]: 15
- Bolt Hole Circle Ø [mm]: 120
- Minimum thickness [mm]: 17
- Inner Diameter [mm]: 210
- Weight [kg]: 8,8
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Packaging length [cm]: 35,8
- Packaging width [cm]: 35,8
- Packaging height [cm]: 13,5
- Drilled: no
- Item number: 92147703
- Manufacturer: TEXTAR
- EAN number: 4019722436505
- Condition: New
price incl. 19% VAT
excl. delivery costs
- 1
- 2
- 3
- 4
- 5
How much will brake disc replacement cost for my LAND ROVER Discovery IV (L319) 3.0TD 4x4 245hp / 180kW?
The cost of replacing brake discs ranges from 140 to 400 pounds