Vehicle identification number: 8566045
Ford Transit mk5 Van 2.3 16V RWD Brake discs (146 hp Petrol E5FA)
Recommended part replacement interval for your car for the part category Brake discs: every 50.000 km
- Fitting Position: Front Axle
- Diameter [mm]: 294
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 24,3
- Height [mm]: 42,7
- Material: Cast Iron
- Surface: Uncoated
- Centering Diameter [mm]: 82
- Number of Holes: 5
- Wheel Bolt Bore Diameter [mm]: M10x1,5
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 22,1, 22.1
- Inner Diameter [mm]: 126,6
- Thread Size: M10x1,5
- Supplementary Article / Supplementary Info Info 2: without bolts / screws
- Drilled: no
- Item number: 82B0749
- Manufacturer: RIDEX
- EAN number: 4059191133543
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 276
- Brake Disc Type: Vented
- Supplementary Info: Original VAICO Quality
- Brake Disc Thickness [mm]: 24,5
- Height [mm]: 43
- Centering Diameter [mm]: 82
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 22,1
- Drive Type: Front-Wheel Drive
- Brake Disc Hub Height [mm]: 18,7
- Packaging width [cm]: 28
- Packaging height [cm]: 9
- Packaging Depth [cm]: 28
- Drilled: no
- Item number: V25-80014
- Manufacturer: VAICO
- EAN number: 4046001446344
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Front Axle
- Diameter [mm]: 276
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 24,5
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 82
- Minimum thickness [mm]: 22,1
- Weight [kg]: 3,15
- Drilled: no
- Item number: 15821
- Manufacturer: MAPCO
- EAN number: 4043605009432
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 294
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 25
- Height [mm]: 43
- Centering Diameter [mm]: 82
- Number of Holes: 5
- Minimum thickness [mm]: 22,1
- Item number: PB 2711
- Manufacturer: STARLINE
- EAN number: 221136211839218118392
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 294
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 24,3
- Height [mm]: 42,7
- Material: Cast Iron
- Surface: Uncoated
- Centering Diameter [mm]: 82
- Number of Holes: 5
- Wheel Bolt Bore Diameter [mm]: M10x1,5
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 22,1, 22.1
- Inner Diameter [mm]: 126,6
- Thread Size: M10x1,5
- Supplementary Article / Supplementary Info Info 2: without bolts / screws
- Drilled: no
- Item number: SKBD-0022899
- Manufacturer: STARK
- EAN number: 4059191083176
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 294
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 24,5
- Height [mm]: 43
- Centering Diameter [mm]: 82
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 22,1
- Weight [kg]: 14,74
- Tightening Torque [Nm]: 100
- Supplementary Article / Supplementary Info Info 2: without bolts / screws
- Packing Type: Box
- Packaging length [cm]: 29,5
- Packaging width [cm]: 29,5
- Packaging height [cm]: 9
- Drilled: no
- Item number: 562140CH
- Manufacturer: CHAMPION
- EAN number: 4060426066192
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 276
- Brake Disc Type: Vented
- Supplementary Info: ORIGINAL Quality
- Brake Disc Thickness [mm]: 24,5
- Height [mm]: 43
- Centering Diameter [mm]: 82
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 22,1
- Thread Size: M10x1,5
- Required quantity: 2
- Drive Type: Front-Wheel Drive
- Drilled: no
- Item number: 715 521 7022
- Manufacturer: MEYLE
- EAN number: 4040074386149
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year to: 02 / 2003
- Vehicle Identification Number (VIN): NM0**************
-
- Vehicle Identification Number (VIN): SFA**************, WF0**************, Y4F**************
- Fitting Position: Front Axle
- Diameter [mm]: 294
- Brake Disc Type: internally vented
- Brake Disc Thickness [mm]: 24,3
- Surface: Coated
- Centering Diameter [mm]: 82,1
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 100
- Thickness [mm]: 43
- Minimum thickness [mm]: 22
- Weight [kg]: 7,0
- Observe service information
- Drilled: no
- Item number: 19515
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816195153
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
-
- Drive Type: Rear-Wheel Drive
- Construction Year to: 04 / 2006
- Fitting Position: Front Axle
- Diameter [mm]: 294
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 24,3
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 82
- Minimum thickness [mm]: 22,1
- Weight [kg]: 3,7
- Drilled: no
- Item number: 15819
- Manufacturer: MAPCO
- EAN number: 4043605009418
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 294
- Brake Disc Type: Vented
- Supplementary Info: Original VAICO Quality
- Brake Disc Thickness [mm]: 24,5
- Height [mm]: 43
- Centering Diameter [mm]: 82
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 22,1
- Brake Disc Hub Height [mm]: 18,6
- Packaging width [cm]: 30
- Packaging height [cm]: 9
- Packaging Depth [cm]: 30
- Drilled: no
- Item number: V25-80015
- Manufacturer: VAICO
- EAN number: 4046001446351
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 294
- Brake Disc Type: Vented
- Supplementary Info: ORIGINAL Quality
- Brake Disc Thickness [mm]: 24,5
- Height [mm]: 43
- Centering Diameter [mm]: 82
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 22,1
- Thread Size: M10x1,5
- Required quantity: 2
- Vehicle Production Country: Great Britain
- Drilled: no
- Item number: 715 521 7021
- Manufacturer: MEYLE
- EAN number: 4040074383964
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle
- Vehicle Production Country: Turkey
-
- Fitting Position: Front Axle
- Diameter [mm]: 294
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 24,5
- Height [mm]: 43
- Surface: Oiled
- Centering Diameter [mm]: 82,1
- Number of Holes: 5
- Minimum thickness [mm]: 22,1
- Test Mark: E1 90R-02C0957 / 2544
- Drilled: no
- Item number: BG3504
- Manufacturer: DELPHI
- EAN number: 5012759140406
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 294
- Brake Disc Type: Vented
- Product line: PREMIER Coat+ disc
- Brake Disc Thickness [mm]: 24,5
- Height [mm]: 43
- Surface: Coated
- Centering Diameter [mm]: 82
- Number of Holes: 5
- Minimum thickness [mm]: 22,1
- Weight [kg]: 7,37
- Tightening Torque [Nm]: 100
- Supplementary Article / Supplementary Info Info 2: without bolts / screws
- Packaging length [cm]: 28,5
- Packaging width [cm]: 28,5
- Packaging height [cm]: 9,3
- Drilled: no
- Item number: DDF1112C
- Manufacturer: FERODO
- EAN number: 4044197844937
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 294
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 24,3
- Height [mm]: 42,9
- Surface: Painted
- Centering Diameter [mm]: 82
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 22,1
- Thread Size: M10 x 1,5
- Colour: black
- Test Mark: E190R-02C0176 / 0490
- Drilled: no
- Item number: DF4217
- Manufacturer: TRW
- EAN number: 3322937321148
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 294
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 24,5
- Height [mm]: 42,9
- Centering Diameter [mm]: 82
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100
- Colour: black
- Drilled: no
- Item number: FT31157
- Manufacturer: FAST
- EAN number: 5901797019037
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle
-
- Fitting Position: Front Axle
- Alternatively
- Diameter [mm]: 294
- Brake Disc Type: Vented, internally vented
- Brake Disc Thickness [mm]: 24,3
- Height [mm]: 43
- Surface: Coated
- Centering Diameter [mm]: 82
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 22,1
- fulfils ECE norm: ECE-R90
- Drilled: no
- Item number: 0 986 479 B29
- Manufacturer: BOSCH
- EAN number: 4047025348836
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle
- Vehicle Production Country: Turkey
- Vehicle type: Transit 350
-
- Fitting Position: Front Axle
- Vehicle type: Transit 330
- Diameter [mm]: 294
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 24,3
- Height [mm]: 43
- Surface: Coated
- Centering Diameter [mm]: 82
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 22,1
- Hub Diameter [mm]: 130
- Weight [kg]: 6,95
- Drilled: no
- Item number: 17115
- Manufacturer: A.B.S.
- EAN number: 8717109236552
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 276
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 24,5
- Surface: Coated
- Number of Holes: 5
- Drilled: no
- Item number: 1563104300
- Manufacturer: JP GROUP
- EAN number: 5710412610395
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year to: 02 / 2003
- Vehicle Identification Number (VIN): NM0**************
-
- Vehicle Identification Number (VIN): SFA**************, WF0**************, Y4F**************
- Fitting Position: Front Axle
- Diameter [mm]: 294
- Brake Disc Type: internally vented
- Brake Disc Thickness [mm]: 24,3
- Surface: Coated
- Centering Diameter [mm]: 82,1
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 100
- Thickness [mm]: 43
- Minimum thickness [mm]: 22
- Weight [kg]: 7,0
- Observe service information
- Drilled: no
- Item number: ADF124341
- Manufacturer: BLUE PRINT
- EAN number: 5057746063207
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
-
- TecDoc Engine Number: E5FA, E5FC
- Vehicle type: FT 260 S, FT 280 M, FT 280 S, FT 300 S, FT 330 L, FT 330 M, FT 330 S, FT 350 EL, FT 350 L, FT 350 M, FT 280 L
- Fitting Position: Front Axle
- Construction Year from: 08 / 2001
- Diameter [mm]: 294
- Brake Disc Type: Vented, internally vented
- Brake Disc Thickness [mm]: 24,5
- Height [mm]: 43
- Surface: Oiled
- Centering Diameter [mm]: 82
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 22,1
- fulfils ECE norm: ECE-R90
- Drilled: no
- Item number: 0 986 478 303
- Manufacturer: BOSCH
- EAN number: 3165143442517
- Condition: New
price incl. 19% VAT
excl. delivery costs
- 1
- 2
- 3
- 4
- 5
How much will brake disc replacement cost for my FORD Transit Mk5 Van (V184, V185) 2.3 16V RWD (FAA_, FAB_, FAC_) 146hp / 107kW?
The cost of replacing brake discs ranges from 140 to 400 pounds