Vehicle identification number: 8255329
DAEWOO Leganza Saloon (V100) 2.0 16V Brake discs (133 hp Petrol X 20 SED)
Recommended part replacement interval for your car for the part category Brake discs: every 50.000 km
- Fitting Position: Rear Axle
- Diameter [mm]: 258
- Brake Disc Type: solid
- Drilled: no
- Supplementary Info: Original VAICO Quality
- Brake Disc Thickness [mm]: 10,3
- Height [mm]: 64,7
- Centering Diameter [mm]: 57
- Rim Hole Number: 4
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 8
- Brake Disc Hub Height [mm]: 54,5
- Packaging width [cm]: 26
- Packaging height [cm]: 13
- Packaging Depth [cm]: 26
- Item number: V51-40003
- Manufacturer: VAICO
- EAN number: 4046001551048
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Rear Axle
- Diameter [mm]: 258
- Brake Disc Type: solid
- Drilled: no
- Surface: Coated
- Brake Disc Thickness [mm]: 10
- Centering Diameter [mm]: 57
- Rim Hole Number: 4
- Bolt Hole Circle Ø [mm]: 100
- Thickness [mm]: 67
- Minimum thickness [mm]: 8
- Number of mounting bores: 1
- Observe service information
- Rim Size [inch]: 14.0
- Item number: 23542
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816235422
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 258
- Brake Disc Type: solid
- Drilled: no
- Surface: Coated
- Brake Disc Thickness [mm]: 10
- Centering Diameter [mm]: 57
- Rim Hole Number: 4
- Bolt Hole Circle Ø [mm]: 100
- Thickness [mm]: 67
- Minimum thickness [mm]: 8
- Number of mounting bores: 1
- Observe service information
- Rim Size [inch]: 14.0
- Item number: ADG04326
- Manufacturer: BLUE PRINT
- EAN number: 5050063043266
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 256
- Brake Disc Type: internally vented
- Drilled: no
- Surface: Coated
- Brake Disc Thickness [mm]: 24
- Centering Diameter [mm]: 60
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 114
- Thickness [mm]: 47
- Minimum thickness [mm]: 22
- Number of mounting bores: 1
- Observe service information
- Item number: 23539
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816235392
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 256
- Brake Disc Type: Vented
- Drilled: no
- Surface: Oiled
- for model code: Kondor (Doninvest)
- Brake Disc Thickness [mm]: 24
- Height [mm]: 47
- Centering Diameter [mm]: 60
- Number of Holes: 5
- Minimum thickness [mm]: 22,4
- Test Mark: E1 90R-02C0074 / 1561
- Item number: BG3531
- Manufacturer: DELPHI
- EAN number: 5012759152621
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 256
- Brake Disc Type: internally vented
- Drilled: no
- Surface: Coated
- Brake Disc Thickness [mm]: 24
- Centering Diameter [mm]: 60
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 114
- Thickness [mm]: 47
- Minimum thickness [mm]: 22
- Number of mounting bores: 1
- Observe service information
- Item number: ADG04329
- Manufacturer: BLUE PRINT
- EAN number: 5050063177466
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 256
- Brake Disc Type: Vented
- Drilled: no
- Surface: Painted
- Brake Disc Thickness [mm]: 24
- Height [mm]: 46,8
- Centering Diameter [mm]: 60
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 114,3
- Minimum thickness [mm]: 22,4
- Colour: black
- Test Mark: E1 90R-02 C0176 / 0531
- Item number: DF6441
- Manufacturer: TRW
- EAN number: 3322938169763
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 258
- Brake Disc Type: solid
- Drilled: no
- Surface: Oiled
- for model code: Kondor (Doninvest)
- Brake Disc Thickness [mm]: 10
- Height [mm]: 63,4
- Centering Diameter [mm]: 57
- Number of Holes: 5
- Minimum thickness [mm]: 8,5
- Test Mark: E1 90R-02C0241 / 0038
- Item number: BG3554
- Manufacturer: DELPHI
- EAN number: 5012759159378
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 258
- Brake Disc Type: solid
- Drilled: no
- Surface: Coated
- Brake Disc Thickness [mm]: 10
- Centering Diameter [mm]: 57
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 114
- Thickness [mm]: 65
- Minimum thickness [mm]: 8
- Number of mounting bores: 1
- Observe service information
- Item number: ADG04371
- Manufacturer: BLUE PRINT
- EAN number: 5050063043716
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 258
- Brake Disc Type: solid
- Drilled: no
- Surface: Coated
- Brake Disc Thickness [mm]: 10
- Centering Diameter [mm]: 57
- Rim Hole Number: 4
- Bolt Hole Circle Ø [mm]: 100
- Thickness [mm]: 66,5
- Minimum thickness [mm]: 8
- Weight [kg]: 4,72
- Number of mounting bores: 1
- Rim Size [inch]: 14.0
- Item number: 89 92 3542
- Manufacturer: SWAG
- EAN number: 4044688532596
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 258
- Brake Disc Type: solid
- Drilled: no
- Surface: Coated
- Brake Disc Thickness [mm]: 10
- Centering Diameter [mm]: 57
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 114
- Thickness [mm]: 65
- Minimum thickness [mm]: 8
- Number of mounting bores: 1
- Observe service information
- Item number: 23540
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816235408
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 256
- Brake Disc Type: internally vented
- Drilled: no
- Surface: Coated
- Brake Disc Thickness [mm]: 24
- Centering Diameter [mm]: 60
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 114,3
- Thickness [mm]: 47
- Minimum thickness [mm]: 22
- Weight [kg]: 5,67
- Number of mounting bores: 1
- Item number: 89 92 3539
- Manufacturer: SWAG
- EAN number: 4044688532565
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 258
- Brake Disc Type: solid
- Drilled: no
- Surface: Coated
- Brake Disc Thickness [mm]: 10
- Centering Diameter [mm]: 57
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 114,3
- Thickness [mm]: 65
- Minimum thickness [mm]: 8
- Weight [kg]: 4,500
- Number of mounting bores: 1
- Item number: 89 92 3540
- Manufacturer: SWAG
- EAN number: 4044688532572
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 255,8
- Brake Disc Type: Vented
- Drilled: no
- Surface: Oiled
- Brake Disc Thickness [mm]: 24
- Height [mm]: 46,8
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 22
- Wheel Hub Diameter [mm]: 60
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 12,7
- Item number: 0 986 479 T89
- Manufacturer: BOSCH
- EAN number: 4047025350709
- Condition: New
price incl. 19% VAT
- Fitting Position: Front Axle
- Diameter [mm]: 256
- Brake Disc Type: Vented
- Drilled: no
- Brake Disc Thickness [mm]: 24,0
- Height [mm]: 46,8
- Centering Diameter [mm]: 60,0
- Number of Holes: 5
- Test Mark: ECE-R90, ECE R90 APPROVED
- Item number: 23-1137
- Manufacturer: METELLI
- EAN number: 2212192988930
- Condition: New
Sample photo only
- Fitting Position: Front Axle
- Diameter [mm]: 256, 255,8
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 24
- Number of Holes: 5
- Production Number: K6048330
- Item number: 6048330
- Manufacturer: KRAFT
- EAN number: 5901159327299
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 258
- Brake Disc Type: solid
- Drilled: no
- Brake Disc Thickness [mm]: 10,5
- Height [mm]: 64,7
- Centering Diameter [mm]: 57
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 114,3
- Minimum thickness [mm]: 8
- Hub Diameter [mm]: 182
- Weight [kg]: 4,5
- Item number: 16925
- Manufacturer: A.B.S.
- EAN number: 8717109021844
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 258
- Brake Disc Type: solid
- Drilled: no
- Surface: Painted
- Brake Disc Thickness [mm]: 10,3
- Height [mm]: 65
- Number of bores: 5
- Bolt Hole Circle Ø [mm]: 57
- Minimum thickness [mm]: 9
- for OE number: 96219485
- Item number: 61-0W-001C
- Manufacturer: ASHIKA
- EAN number: 8052553563510
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 256
- Brake Disc Type: Vented
- Drilled: no
- Brake Disc Thickness [mm]: 24
- Height [mm]: 47
- Centering Diameter [mm]: 60
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 114,3
- Minimum thickness [mm]: 22,4
- Hub Diameter [mm]: 149
- Weight [kg]: 5,36
- Item number: 16926
- Manufacturer: A.B.S.
- EAN number: 8717109021851
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 255,8, 256
- Brake Disc Type: Vented
- Drilled: no
- Brake Disc Thickness [mm]: 24
- Height [mm]: 46,8
- Centering Diameter [mm]: 60,1
- Number of Holes: 5
- Minimum thickness [mm]: 22,4
- Weight [kg]: 5,36
- Test Mark: K.B.A.: 61209
- Item number: 6960.10
- Manufacturer: REMSA
- EAN number: 8427975159403
- Condition: New
- 1
- 2
- 3
- 4
- 5
How much will brake disc replacement cost for my DAEWOO Leganza Saloon (V100) 2.0 16V 133hp / 98kW?
The cost of replacing brake discs ranges from 140 to 400 pounds