Vehicle identification number: 0005CID
BMW F21 M140i 3.0 Brake discs (340 hp Petrol B58 B30 A)
Recommended part replacement interval for your car for the part category Brake discs: every 50.000 km
- Fitting Position: Front Axle
- Diameter [mm]: 340
- Brake Disc Type: Vented
- Drilled: no
- Surface: Uncoated
- Machining: Untreated
- Supplementary Article / Supplementary Info Info 2: without bolts / screws
- Brake Disc Thickness [mm]: 30
- Height [mm]: 73,2
- Material: Cast Iron
- Centering Diameter [mm]: 79
- Number of Holes: 5 / 6
- Wheel Bolt Bore Diameter [mm]: 16,7
- Bolt Hole Circle Ø [mm]: 120
- Braking System: for vehicles without Performance brakes
- Item number: 82B0386
- Manufacturer: RIDEX
- EAN number: 4059191456260
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 345
- Brake Disc Type: Vented
- Drilled: no
- Surface: Uncoated
- Machining: Untreated
- Supplementary Article / Supplementary Info Info 2: without bolts / screws
- Brake Disc Thickness [mm]: 24
- Height [mm]: 66,3
- Material: Cast Iron
- Centering Diameter [mm]: 75
- Number of Holes: 5 / 6
- Wheel Bolt Bore Diameter [mm]: 16,6
- Bolt Hole Circle Ø [mm]: 120
- Braking System: for vehicles without M-performance brakes
- Item number: 82B1333
- Manufacturer: RIDEX
- EAN number: 4059191456383
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 345
- Brake Disc Type: two-part brake disc
- Drilled: yes
- Surface: Uncoated
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: without bolts / screws
- Brake Disc Thickness [mm]: 24
- Height [mm]: 66,3
- Material: Cast Iron
- Centering Diameter [mm]: 75
- Number of Holes: 5 / 6
- Wheel Bolt Bore Diameter [mm]: 16,6
- Bolt Hole Circle Ø [mm]: 120
- Minimum thickness [mm]: 22,4
- Inner Diameter [mm]: 160,8
- Braking System: for vehicles with Performance brakes
- Item number: 82B1434
- Manufacturer: RIDEX
- EAN number: 4059191771233
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 340
- Brake Disc Type: Vented
- Drilled: no
- Surface: Uncoated
- Machining: Untreated
- Supplementary Article / Supplementary Info Info 2: without bolts / screws
- Brake Disc Thickness [mm]: 30
- Height [mm]: 73,2
- Material: Cast Iron
- Centering Diameter [mm]: 79
- Number of Holes: 5 / 6
- Wheel Bolt Bore Diameter [mm]: 16,7
- Bolt Hole Circle Ø [mm]: 120
- Braking System: for vehicles without Performance brakes
- Item number: SKBD-0022025
- Manufacturer: STARK
- EAN number: 4059191069347
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 345
- Brake Disc Type: Vented
- Drilled: no
- Surface: Uncoated
- Machining: Untreated
- Supplementary Article / Supplementary Info Info 2: without bolts / screws
- Brake Disc Thickness [mm]: 24
- Height [mm]: 66,3
- Material: Cast Iron
- Centering Diameter [mm]: 75
- Number of Holes: 5 / 6
- Wheel Bolt Bore Diameter [mm]: 16,6
- Bolt Hole Circle Ø [mm]: 120
- Braking System: for vehicles without M-performance brakes
- Item number: SKBD-0023475
- Manufacturer: STARK
- EAN number: 4059191423996
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 340
- Brake Disc Type: slotted / perforated, internally vented
- Drilled: yes
- Surface: Coated
- Machining: High-carbon
- Brake Disc Thickness [mm]: 30
- Centering Diameter [mm]: 79
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 120
- Thickness [mm]: 73
- Minimum thickness [mm]: 28,4
- Number of mounting bores: 1
- Observe service information
- Item number: 105724
- Manufacturer: FEBI BILSTEIN
- EAN number: 4054224057247
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 340
- Brake Disc Type: internally vented, slotted, Drilled dimples
- Drilled: no
- Surface: Coated
- Machining: High-carbon
-
- Alternatively
- Braking System: for vehicles with a standard brake system
- Product line: COAT Z
- Brake Disc Thickness [mm]: 30
- Height [mm]: 73
- Centering Diameter [mm]: 79
- Rim Hole Number: 5
- Hole Arrangement / Number: 6 / 5
- Bolt Hole Circle Ø [mm]: 120
- Minimum thickness [mm]: 28,4
- Weight [kg]: 10,9
- Test Mark: KBA 61364
- Item number: 150.2906.20
- Manufacturer: ZIMMERMANN
- EAN number: 4250238755296
- Condition: New
price incl. 19% VAT
- Fitting Position: Front Axle
- Diameter [mm]: 340
- Brake Disc Type: perforated / vented
- Surface: Coated
- Brake Disc Thickness [mm]: 30
- Height [mm]: 73,2
- Centering Diameter [mm]: 79
- Number of Holes: 5
- Number of bores: 1
- Bolt Hole Circle Ø [mm]: 120
- Minimum thickness [mm]: 28,4
- Item number: VKBD 80246 V1
- Manufacturer: SKF
- EAN number: 7316581895922
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 340
- Brake Disc Type: Vented
- Drilled: no
- Supplementary Info: Original VAICO Quality
- Brake Disc Thickness [mm]: 30
- Height [mm]: 73,2
- Centering Diameter [mm]: 79
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 120
- Minimum thickness [mm]: 28,4
- Brake Disc Hub Height [mm]: 43,2
- Packaging width [cm]: 34,2
- Packaging height [cm]: 7,5
- Packaging Depth [cm]: 34,2
- Item number: V20-80020
- Manufacturer: VAICO
- EAN number: 4046001703652
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Rear Axle
- Diameter [mm]: 345
- Brake Disc Type: Vented
- Drilled: no
- Supplementary Info: Original VAICO Quality
- Brake Disc Thickness [mm]: 24
- Height [mm]: 66,1
- Centering Diameter [mm]: 75
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 120
- Minimum thickness [mm]: 22,4
- Brake Disc Hub Height [mm]: 42,1
- Packaging width [cm]: 34,5
- Packaging height [cm]: 6,8
- Packaging Depth [cm]: 34,5
- Item number: V20-80021
- Manufacturer: VAICO
- EAN number: 4046001703539
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 345
- Brake Disc Type: perforated / vented
- Drilled: yes
- Brake Disc Thickness [mm]: 24
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 120
- for OE number: 34 20 6 797 598
- Item number: 08.35.241
- Manufacturer: TRUCKTEC AUTOMOTIVE
- EAN number: 4038081146030
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 345
- Brake Disc Type: Vented
- Surface: Coated
- Supplementary Article / Supplementary Info Info 2: with screw, without integrated wheel bearing
-
- Vehicle Equipment: for vehicles with sports package
- Braking System: for vehicles with M-performance brakes
- Brake Disc Thickness [mm]: 24
- Height [mm]: 66,3
- Centering Diameter [mm]: 75
- Rim Hole Number: 5
- Minimum thickness [mm]: 22,4
- Weight [kg]: 10,52
- Number of mounting bores: 1
- Test Mark: ECE-R90
- Item number: 672789
- Manufacturer: VALEO
- EAN number: 3276426727891
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 340
- Brake Disc Type: slotted / internally vented
- Drilled: no
- Brake Disc Thickness [mm]: 30
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 120
- for OE number: 34 10 6 797 602
- Item number: 08.35.207
- Manufacturer: TRUCKTEC AUTOMOTIVE
- EAN number: 4038081096052
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 340
- Brake Disc Type: Vented
- Drilled: no
- Brake Disc Thickness [mm]: 30
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 120
- for OE number: 34 11 6 792 223
- non-directional
- Item number: 08.35.239
- Manufacturer: TRUCKTEC AUTOMOTIVE
- EAN number: 4038081146009
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 340
- Construction Year from: 05 / 2016
- Brake Disc Type: internally vented
- Surface: Coated
- Brake Disc Thickness [mm]: 30
- Height [mm]: 73,2
- Centering Diameter [mm]: 79
- Number of Holes: 5
- Number of bores: 1
- Bolt Hole Circle Ø [mm]: 120
- Minimum thickness [mm]: 28,4
- Item number: VKBD 80297 V1
- Manufacturer: SKF
- EAN number: 7316581896509
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Paired product: 573355J
- Diameter [mm]: 340
- Brake Disc Type: Vented
- Drilled: no
- Surface: Coated
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Brake Disc Thickness [mm]: 30
- Height [mm]: 73,2
- Centering Diameter [mm]: 79
- Bore Diameter 2 [mm]: 16,7
- Bolt Hole Circle Ø [mm]: 120
- Minimum thickness [mm]: 28,4
- Weight [kg]: 12,35
- Number of mounting bores: 1
- Version: JC
- Test Mark: R90 Homologated
- Bore Diameter [mm]: 16,7
- Packing Type: Box
- Packaging width [cm]: 35
- Packaging height [cm]: 9,3
- Item number: 562979JC-1
- Manufacturer: JURID
- EAN number: 4044197984992
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 340
- Brake Disc Type: Vented
- Drilled: no
- Surface: Coated
- Machining: High-carbon
- Brake Disc Thickness [mm]: 30
- Height [mm]: 73,2
- Centering Diameter [mm]: 79
- Number of Holes: 5
- Minimum thickness [mm]: 28,4
- Test Mark: E1 90R-02C0339 / 1376
- Item number: BG9157C
- Manufacturer: DELPHI
- EAN number: 5012759972267
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 340
- Brake Disc Type: internally vented
- Drilled: no
- Surface: Coated
- Machining: High-carbon
- Brake Disc Thickness [mm]: 30
- Centering Diameter [mm]: 79
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 120
- Thickness [mm]: 73
- Minimum thickness [mm]: 28,4
- Number of mounting bores: 1
- Observe service information
- Item number: ADB114376
- Manufacturer: BLUE PRINT
- EAN number: 5057746095413
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 340
- Brake Disc Type: internally vented
- Drilled: no
- Surface: Coated
- Machining: High-carbon
- Braking System: for vehicles with a standard brake system
- Product line: COAT Z
- Brake Disc Thickness [mm]: 30
- Height [mm]: 73
- Centering Diameter [mm]: 79
- Rim Hole Number: 5
- Hole Arrangement / Number: 6 / 5
- Bolt Hole Circle Ø [mm]: 120
- Minimum thickness [mm]: 28,4
- Weight [kg]: 10,9
- Test Mark: ECE R90 APPROVED
- Item number: 150.2903.20
- Manufacturer: ZIMMERMANN
- EAN number: 4250238755272
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 345
- Brake Disc Type: internally vented
- Drilled: no
- Surface: Coated
- Machining: High-carbon
- Brake Disc Thickness [mm]: 24
- Centering Diameter [mm]: 75
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 120
- Thickness [mm]: 66
- Minimum thickness [mm]: 22,4
- Number of mounting bores: 1
- for OE number: 34 20 6 797 605
- Observe service information
- Item number: 105728
- Manufacturer: FEBI BILSTEIN
- EAN number: 4054224057285
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- 1
- 2
- 3
- 4
- 5
How much will brake disc replacement cost for my BMW 1 Hatchback (F21) M140i 340hp / 250kW?
The cost of replacing brake discs ranges from 140 to 400 pounds