Vehicle identification number: 0005AQG
BMW E82 120i 2.0 Brake discs (156 hp Petrol N46 B20 B)
Recommended part replacement interval for your car for the part category Brake discs: every 50.000 km
- Diameter [mm]: 300
- Brake Disc Type: internally vented
- Brake Disc Thickness [mm]: 20
- Fitting Position: Rear Axle
- Surface: Coated
- Centering Diameter [mm]: 75
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 120
- Thickness [mm]: 76,1
- Minimum thickness [mm]: 18,4
- Weight [kg]: 6,58
- Number of mounting bores: 1
- Observe service information
- Drilled: no
- Item number: 43867
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816438670
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle
- Braking System: for vehicles with M-performance brakes
- Diameter [mm]: 338
- Brake Disc Type: internally vented, slotted / perforated
- Product line: COAT Z
- Brake Disc Thickness [mm]: 26
- Height [mm]: 73
- Surface: Coated
- Centering Diameter [mm]: 79
- Rim Hole Number: 5
- Hole Arrangement / Number: 6 / 5
- Bolt Hole Circle Ø [mm]: 120
- Minimum thickness [mm]: 24,4
- Weight [kg]: 10,8
- Machining: High-carbon
- Test Mark: KBA 61385
- Drilled: yes
- Item number: 150.2935.20
- Manufacturer: ZIMMERMANN
- EAN number: 4250238764762
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Rear Axle
- Braking System: for vehicles without M-performance brakes
- Diameter [mm]: 300
- Brake Disc Type: internally vented, Perforated
- Product line: SPORT COAT Z
- Brake Disc Thickness [mm]: 20
- Height [mm]: 76
- Surface: Coated
- Centering Diameter [mm]: 75
- Rim Hole Number: 5
- Hole Arrangement / Number: 6 / 5
- Bolt Hole Circle Ø [mm]: 120
- Minimum thickness [mm]: 18,4
- Weight [kg]: 6,6
- Machining: High-carbon
- Test Mark: ECE R90 APPROVED
- Drilled: yes
- Item number: 150.3462.52
- Manufacturer: ZIMMERMANN
- EAN number: 4250238747338
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle
- Suspension: for vehicles without M technology
- Diameter [mm]: 300
- Brake Disc Type: internally vented
- Product line: PRO+
- Brake Disc Thickness [mm]: 23,8
- Height [mm]: 73,5
- Surface: Coated
- Centering Diameter [mm]: 79
- Hole Arrangement / Number: 05 / 06
- Wheel Bolt Bore Diameter [mm]: 14,7
- Bolt Hole Circle Ø [mm]: 120
- Minimum thickness [mm]: 22,4
- Inner Diameter [mm]: 151,8
- Weight [kg]: 8,3
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Packaging length [cm]: 30,8
- Packaging width [cm]: 30,8
- Packaging height [cm]: 18,5
- Drilled: no
- Item number: 92137705
- Manufacturer: TEXTAR
- EAN number: 4019722287442
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 300
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 20
- Fitting Position: Rear Axle
- Height [mm]: 76,1
- Surface: Painted
- Centering Diameter [mm]: 75
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 120
- Minimum thickness [mm]: 18,4
- Colour: black
- Drilled: no
- Item number: DF6313
- Manufacturer: TRW
- EAN number: 3322938168346
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 300
- Brake Disc Type: internally vented
- Product line: COAT Z
- Brake Disc Thickness [mm]: 24
- Fitting Position: Front Axle
- Height [mm]: 74
- Surface: Coated
- Centering Diameter [mm]: 79
- Rim Hole Number: 5
- Hole Arrangement / Number: 6 / 5
- Bolt Hole Circle Ø [mm]: 120
- Minimum thickness [mm]: 22,4
- Weight [kg]: 8
- Machining: High-carbon
- Test Mark: ECE R90 APPROVED
- Drilled: no
- Item number: 150.3427.20
- Manufacturer: ZIMMERMANN
- EAN number: 4250238718680
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle
- paired article number: 573187CH
- Diameter [mm]: 300
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 24
- Height [mm]: 73,5
- Centering Diameter [mm]: 79
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 120
- Minimum thickness [mm]: 22,4
- Weight [kg]: 16,91
- Tightening Torque [Nm]: 120
- Supplementary Article / Supplementary Info Info 2: without bolts / screws
- Packing Type: Box
- Packaging length [cm]: 30,1
- Packaging width [cm]: 30,1
- Packaging height [cm]: 15,1
- Drilled: no
- Item number: 562342CH
- Manufacturer: CHAMPION
- EAN number: 4060426068172
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle
- Suspension: for vehicles without M technology
- Diameter [mm]: 300
- Brake Disc Type: internally vented
- Product line: PRO
- Brake Disc Thickness [mm]: 23,8
- Height [mm]: 73,5
- Surface: Coated
- Centering Diameter [mm]: 79
- Hole Arrangement / Number: 05 / 06
- Wheel Bolt Bore Diameter [mm]: 14,7
- Bolt Hole Circle Ø [mm]: 120
- Minimum thickness [mm]: 22,4
- Inner Diameter [mm]: 151,8
- Weight [kg]: 8,3
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Assy. / disassy. by qualified personnel required!
- Drilled: no
- Item number: 8DD 355 111-921
- Manufacturer: HELLA
- EAN number: 4082300376586
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 300
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 24
- Fitting Position: Front Axle
- Height [mm]: 73
- Surface: Coated
- Centering Diameter [mm]: 79
- Number of Holes: 5
- Minimum thickness [mm]: 22,4
- Test Mark: E4 90R-02C0703 / 2624
- Drilled: no
- Item number: BG3998C
- Manufacturer: DELPHI
- EAN number: 5012759532188
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle
- Suspension: for vehicles without M technology
- Diameter [mm]: 300
- Brake Disc Type: internally vented
- Brake Disc Thickness [mm]: 23,8
- Height [mm]: 73,5
- Surface: Coated
- Centering Diameter [mm]: 79
- Number of Holes: 5
- Number of bores: 1
- Bolt Hole Circle Ø [mm]: 120
- Minimum thickness [mm]: 22,4
- Item number: VKBD 80079 V2
- Manufacturer: SKF
- EAN number: 7316581894000
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 300
- Brake Disc Type: internally vented
- Brake Disc Thickness [mm]: 24
- Fitting Position: Front Axle
- Surface: Coated
- Centering Diameter [mm]: 79
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 120
- Thickness [mm]: 74
- Minimum thickness [mm]: 22,4
- Weight [kg]: 7,93
- Number of mounting bores: 1
- Observe service information
- Drilled: no
- Item number: ADB114305
- Manufacturer: BLUE PRINT
- EAN number: 5050063005547
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 300
- Brake Disc Type: Vented
- Supplementary Info: Original VAICO Quality
- Brake Disc Thickness [mm]: 24
- Fitting Position: Front Axle
- Height [mm]: 73,5
- Centering Diameter [mm]: 79
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 120
- Minimum thickness [mm]: 22,4
- Inner Diameter [mm]: 152
- Weight [kg]: 8,575
- Suspension: for vehicles without M technology
- Brake Disc Hub Height [mm]: 49
- Packaging width [cm]: 32
- Packaging height [cm]: 15
- Packaging Depth [cm]: 32
- Drilled: no
- Item number: V20-80055
- Manufacturer: VAICO
- EAN number: 4046001349713
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
price incl. 19% VAT
excl. delivery costs
-
- Braking System: for vehicles without M-performance brakes
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: internally vented
- Product line: COAT Z
- Brake Disc Thickness [mm]: 20
- Height [mm]: 76
- Surface: Coated
- Centering Diameter [mm]: 75
- Rim Hole Number: 5
- Hole Arrangement / Number: 6 / 5
- Bolt Hole Circle Ø [mm]: 120
- Minimum thickness [mm]: 18,4
- Weight [kg]: 6,6
- Machining: High-carbon
- Test Mark: ECE R90 APPROVED
- Drilled: no
- Item number: 150.3462.20
- Manufacturer: ZIMMERMANN
- EAN number: 4250238741978
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 338
- Brake Disc Type: slotted / perforated
- Brake Disc Thickness [mm]: 26
- Fitting Position: Front Axle
- Surface: Coated
- Number of Holes: 5
- Braking System: for vehicles with Performance brakes
- Suspension: for vehicles with M technology
- Supplementary Article / Supplementary Info Info 2: 609
- Drilled: yes
- Item number: 1463107000
- Manufacturer: JP GROUP
- EAN number: 5710412863241
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle
- Suspension: for vehicles without M technology
- Diameter [mm]: 300
- Brake Disc Type: internally vented
- Product line: PRO High Carbon
- Brake Disc Thickness [mm]: 23,8
- Height [mm]: 73,5
- Surface: Coated
- Centering Diameter [mm]: 79
- Hole Arrangement / Number: 05 / 06
- Wheel Bolt Bore Diameter [mm]: 14,7
- Bolt Hole Circle Ø [mm]: 120
- Minimum thickness [mm]: 22,4
- Inner Diameter [mm]: 151,8
- Weight [kg]: 8,3
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs, with bolts / screws
- Number of bolts / screws: 2
- Assy. / disassy. by qualified personnel required!
- Drilled: no
- Item number: 8DD 355 128-421
- Manufacturer: HELLA
- EAN number: 4082300660210
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 300
- Brake Disc Type: internally vented, slotted
- Brake Disc Thickness [mm]: 24
- Fitting Position: Front Axle
- Height [mm]: 74
- Surface: Coated
- Centering Diameter [mm]: 79
- Rim Hole Number: 5
- Hole Arrangement / Number: 6 / 5
- Bolt Hole Circle Ø [mm]: 120
- Minimum thickness [mm]: 22,4
- Weight [kg]: 8
- Machining: High-carbon
- Test Mark: ECE R90 APPROVED
- directional
- Drilled: no
- Item number: 150.3427.53
- Manufacturer: ZIMMERMANN
- EAN number: 4250238778011
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 300
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 24
- Fitting Position: Front Axle
- Height [mm]: 73
- Surface: Coated
- Centering Diameter [mm]: 79
- Rim Hole Number: 5
- Minimum thickness [mm]: 22
- Weight [kg]: 8,32
- Braking System: for vehicles with a standard brake system
- Drilled: no
- Item number: 672576
- Manufacturer: VALEO
- EAN number: 3276426725767
- Condition: New
1923-2023: 100 years of braking
price incl. 19% VAT
excl. delivery costs
-
- Braking System: for vehicles without Performance brakes
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: Vented
- Supplementary Info: Original VAICO Quality
- Brake Disc Thickness [mm]: 20
- Height [mm]: 76
- Centering Diameter [mm]: 75
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 120
- Minimum thickness [mm]: 18,4
- Brake Disc Hub Height [mm]: 56
- Packaging width [cm]: 30
- Packaging height [cm]: 16
- Packaging Depth [cm]: 30
- Drilled: no
- Item number: V20-80078
- Manufacturer: VAICO
- EAN number: 4046001550096
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle
- Suspension: for vehicles without sports suspension
- Diameter [mm]: 300
- Brake Disc Type: Vented
- Product line: COATED
- Brake Disc Thickness [mm]: 23,8
- Height [mm]: 73,5
- Surface: Coated
- Centering Diameter [mm]: 79
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 120
- Minimum thickness [mm]: 22,4
- Hub Diameter [mm]: 162
- Weight [kg]: 8,22
- Drilled: no
- Item number: 17662
- Manufacturer: A.B.S.
- EAN number: 8717109375213
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 300
- Brake Disc Type: internally vented
- Product line: PRO
- Brake Disc Thickness [mm]: 20
- Fitting Position: Rear Axle
- Height [mm]: 76,1
- Surface: Coated
- Centering Diameter [mm]: 75
- Hole Arrangement / Number: 05 / 06
- Wheel Bolt Bore Diameter [mm]: 14,7
- Bolt Hole Circle Ø [mm]: 120
- Minimum thickness [mm]: 18,4
- Inner Diameter [mm]: 161
- Weight [kg]: 6,6
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Packaging length [cm]: 30,8
- Packaging width [cm]: 30,8
- Packaging height [cm]: 18,5
- Drilled: no
- Item number: 92199503
- Manufacturer: TEXTAR
- EAN number: 4019722472541
- Condition: New
price incl. 19% VAT
excl. delivery costs
- 1
- 2
- 3
- 4
- 5
How much will brake disc replacement cost for my BMW 1 Coupe (E82) 120i 156hp / 115kW?
The cost of replacing brake discs ranges from 140 to 400 pounds