VW California T5 Minibus (7EC, 7EF, 7EG, 7HF) 1.9 TDI Blower motor resistor (84 hp Diesel BRR)
- Voltage [V]: 12
- Number of pins: 4
- Item number: 55229
- Our price: 19,17 €
- Manufacturer: AIC
- EAN number: 4046283552290
- Condition: New
Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use.
For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules.
If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at:
Phone: 040 - 25 30 66 55 Email: [email protected]
This often avoids extensive troubleshooting that is disproportionate to normal repair times.
The following applies to complaints: The more complete the processes are submitted, the faster they can be processed.
Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
price incl. 19% VAT
excl. delivery costs

- Voltage [V]: 12
- Vehicle Equipment: for vehicles without automatic climate control
- Number of pins: 4
- Item number: 665171
- Our price: 26,12 €
- Manufacturer: ERA
- EAN number: 8053379803385
- Condition: New
-
- for PR number: 0WL, 0WN, 0WM, 0WP, 0WQ, 2E3, 2E4, 0WR
- Vehicle Identification Number (VIN) to: 7H-5-120000, 7H-A-050000, 7H-8-200000
- Fitting Position: Rear Axle
- Vehicle Identification Number (VIN) from: 7H-6-000001, 7H-8-028000, 7H-A-200001
- Brake System: Lucas / TRW
- Wear Warning Contact: incl. wear warning contact
- Supplementary Article / Supplementary Info: with accessories
- Thickness [mm]: 17,4
- Quantity Unit: Axle Set
- Height [mm]: 59,0
- Width [mm]: 116,1
- Test Mark: E1 90R-02A0498 / 0489, E9 90R-02A1163 / 0715
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- Warning Contact Length [mm]: 170
- MAPP code available
- Article number of recommended accessories: 13.0460-0023.2
- Number of bolts / screws: 4
- Observe dimensions
- Item number: 13.0460-2882.2
- Our price: 48,26 €
- Manufacturer: ATE
- EAN number: 4006633127134
- Condition: New
-
- for PR number: 0WR
- Vehicle Identification Number (VIN) to: 7H-8-027999
- Fitting Position: Rear Axle
- Brake System: ATE
- Wear Warning Contact: incl. wear warning contact
- Thickness [mm]: 19,1
- Quantity Unit: Axle Set
- Height 1 [mm]: 50,9
- Height 2 [mm]: 53,9
- Width 2 [mm]: 140,7
- Width 1 [mm]: 141,3
- Test Mark: E1 90R-01845 / 684
- Warning Contact Length [mm]: 310
- MAPP code available
- Item number: 13.0460-7218.2
- Our price: 53,09 €
- Manufacturer: ATE
- EAN number: 4006633271257
- Condition: New
-
- for PR number: 2E3
- Fitting Position: Front Axle
- Brake System: ATE
- Wear Warning Contact: incl. wear warning contact
- Quantity Unit: Axle Set
- Number of wear indicators [per axle]: 1
- Height 1 [mm]: 73,3
- Height 2 [mm]: 74,8
- Width 2 [mm]: 156,2
- Width 1 [mm]: 155,0
- Thickness 1 [mm]: 19,7
- Thickness 2 [mm]: 18,7
- Test Mark: E1 90R-02A0465 / 0816
- Warning Contact Length [mm]: 195
- MAPP code available
- Item number: 13.0460-7236.2
- Our price: 52,22 €
- Manufacturer: ATE
- EAN number: 4006633310765
- Condition: New
-
- Vehicle Identification Number (VIN) from: 7H-A-200001, 7H-6-000001, 7H-8-028000
- Fitting Position: Rear Axle
- for PR number: 0WL, 0WN, 0WM, 0WP, 0WQ, 2E3, 2E4, 0WR
- Vehicle Identification Number (VIN) to: 7H-5-120000, 7H-A-050000, 7H-8-200000
- Diameter [mm]: 294,0
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 21,9
- Height [mm]: 44,4
- Surface: Coated
- Centering Diameter [mm]: 76,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 120,0
- Minimum thickness [mm]: 19,5
- Inner Diameter [mm]: 154,6
- Machining: High-carbon
- MAPP code available
- Test Mark: E1 90R-02C0118 / 0060
- Bore Diameter [mm]: 16,6
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0122-0211.1
- Manufacturer: ATE
- EAN number: 4006633113205
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Vehicle Identification Number (VIN) to: 7H-A-050000
- for PR number: 2E4
- Fitting Position: Front Axle
- Diameter [mm]: 333,0
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 32,5
- Height [mm]: 55,6
- Surface: Coated
- Centering Diameter [mm]: 76,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 120,0
- Minimum thickness [mm]: 28,5
- Inner Diameter [mm]: 154,6
- Machining: High-carbon
- MAPP code available
- Test Mark: E1 90R-02C0115 / 0412
- Bore Diameter [mm]: 16,6
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0132-0116.1
- Manufacturer: ATE
- EAN number: 4006633113670
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year to: 11 / 2009
- Fitting Position: Front Axle
- for PR number: 2E4
- Diameter [mm]: 333
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 32,5
- Height [mm]: 55,4
- Surface: Coated
- Centering Diameter [mm]: 76
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 120
- Minimum thickness [mm]: 28,5
- Machining: High-carbon
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 16,6
- Drilled: no
- Item number: 0 986 479 096
- Manufacturer: BOSCH
- EAN number: 4047024250406
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year to: 11 / 2009
- Fitting Position: Front Axle
- for PR number: 2E3
- Diameter [mm]: 308
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 30
- Height [mm]: 55,5
- Surface: Oiled
- Centering Diameter [mm]: 76
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 120
- Minimum thickness [mm]: 25,5
- Machining: High-carbon
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 16,6
- Drilled: no
- Item number: 0 986 479 211
- Manufacturer: BOSCH
- EAN number: 4047023113801
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year to: 11 / 2009
- Fitting Position: Rear Axle
- not for gross vehicle weight [kg]: 3200
- not for PR number: 0WR
- Wear Warning Contact: incl. wear warning contact
- Material: Low-Metallic
- Supplementary Article / Supplementary Info: with accessories
- Thickness [mm]: 17,5
- Quantity Unit: Axle Set
- Height [mm]: 58,6
- Width [mm]: 116,2
- WVA Number: 23326
- Test Mark: ECE-R90
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate, with bolts / screws
- Article number of recommended accessories: 1987474434, 1987474402
- Number of bolts / screws: 4
- Observe technical data
- Item number: 0 986 494 108
- Our price: 38,46 €
- Manufacturer: BOSCH
- EAN number: 4047024130302
- Condition: New
-
- Construction Year to: 11 / 2009
- Fitting Position: Front Axle
- for PR number: 2E4
- Wear Warning Contact: with integrated wear sensor
- Material: Low-Metallic
- Quantity Unit: Axle Set
- Height 1 [mm]: 72,9
- Height 2 [mm]: 74,8
- Width 2 [mm]: 156,4
- Width 1 [mm]: 155
- Thickness 1 [mm]: 17,1
- Thickness 2 [mm]: 17,6
- WVA Number: 23748
- Test Mark: ECE-R90
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate, with mounting manual
- Article number of recommended accessories: 1987474687, 1987474433
- Observe technical data
- Item number: 0 986 494 203
- Our price: 55,28 €
- Manufacturer: BOSCH
- EAN number: 4047024558632
- Condition: New
-
- Construction Year to: 06 / 2007
- Fitting Position: Rear Axle
- Gross vehicle weight [kg]: 3200
- for PR number: 0WR
- Wear Warning Contact: with integrated wear sensor
- Material: Low-Metallic
- Thickness [mm]: 19,1
- Quantity Unit: Axle Set
- Height 1 [mm]: 50,8
- Height 2 [mm]: 53,9
- Width 2 [mm]: 141,7
- Width 1 [mm]: 140,9
- WVA Number: 24367
- Test Mark: ECE-R90
- Supplementary Article / Supplementary Info Info 2: with piston clip, with anti-squeak plate
- Article number of recommended accessories: 1987474434, 1987474402
- Observe technical data
- Item number: 0 986 494 309
- Our price: 40,93 €
- Manufacturer: BOSCH
- EAN number: 4047024684430
- Condition: New
-
- Fitting Position: Rear Axle
- for PR number: 2E3, 2E4
- Brake System: Lucas
- Wear Warning Contact: not prepared for wear warning indicator
- Supplementary Article / Supplementary Info: with accessories
- Thickness [mm]: 17,7
- Quantity Unit: Axle Set
- Height [mm]: 59
- Width [mm]: 116,5
- WVA Number: 23326
- Weight [kg]: 1,381
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- Packaging length [cm]: 15,2
- Packaging width [cm]: 8,8
- Packaging height [cm]: 8,4
- Item number: 2332601
- Our price: 43,99 €
- Manufacturer: TEXTAR
- EAN number: 4019722274497
- Condition: New
-
- Fitting Position: Front Axle
- for PR number: 2E3
- Diameter [mm]: 308
- Brake Disc Type: internally vented
- Brake Disc Thickness [mm]: 29,5
- Height [mm]: 55,5
- Centering Diameter [mm]: 76
- Number of Holes: 5
- Minimum thickness [mm]: 25,5
- Drilled: no
- Item number: V2005V
- Manufacturer: LPR
- EAN number: 8032532108796
- Condition: New
price incl. 19% VAT
-
- for PR number: 2E4
- Vehicle Identification Number (VIN) to: 7H-A-050000
- Fitting Position: Front Axle
- Brake System: ATE
- Wear Warning Contact: incl. wear warning contact
- Quantity Unit: Axle Set
- Number of wear indicators [per axle]: 1
- Height 1 [mm]: 73,3
- Height 2 [mm]: 74,8
- Width 2 [mm]: 156,2
- Width 1 [mm]: 155,0
- Thickness 1 [mm]: 18,1
- Thickness 2 [mm]: 17,6
- Test Mark: E1 90R-02A0465 / 0816
- Warning Contact Length [mm]: 195
- MAPP code available
- Item number: 13.0460-7240.2
- Our price: 74,18 €
- Manufacturer: ATE
- EAN number: 4006633310772
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- for PR number: 0WR
- Vehicle Identification Number (VIN) to: 7H-8-027999
- Fitting Position: Rear Axle
- Diameter [mm]: 314,0
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22,0
- Height [mm]: 75,5
- Surface: Coated
- Centering Diameter [mm]: 76,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 120,0
- Minimum thickness [mm]: 18,0
- Inner Diameter [mm]: 185,0
- MAPP code available
- Test Mark: E1 90R-02C0234 / 1094
- Bore Diameter [mm]: 16,6
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0122-0215.1
- Manufacturer: ATE
- EAN number: 4006633227803
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- for PR number: 2E3
- Fitting Position: Front Axle
- Diameter [mm]: 308,0
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 29,5
- Height [mm]: 55,6
- Surface: Coated
- Centering Diameter [mm]: 76,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 120,0
- Minimum thickness [mm]: 25,5
- Inner Diameter [mm]: 154,6
- Machining: High-carbon
- MAPP code available
- Test Mark: E1 90R-02C0115 / 0880
- Bore Diameter [mm]: 16,6
- Drilled: no
- Item number: 24.0130-0114.1
- Manufacturer: ATE
- EAN number: 4006633119313
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year to: 11 / 2009
- Fitting Position: Rear Axle
- for PR number: 0WR
- Diameter [mm]: 314
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22
- Height [mm]: 75,7
- Surface: Oiled
- Centering Diameter [mm]: 76,1
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 120
- Minimum thickness [mm]: 20
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 16,8
- Drilled: no
- Item number: 0 986 479 094
- Manufacturer: BOSCH
- EAN number: 4047024118256
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year to: 11 / 2009
- Fitting Position: Rear Axle
- not for PR number: 0WR
- Diameter [mm]: 294
- Brake Disc Type: Vented, internally vented
- Brake Disc Thickness [mm]: 22
- Height [mm]: 44,2
- Surface: Coated
- Centering Diameter [mm]: 76
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 120
- Minimum thickness [mm]: 19,5
- Machining: High-carbon
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 16,6
- Drilled: no
- Item number: 0 986 479 097
- Manufacturer: BOSCH
- EAN number: 3165143939604
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year to: 11 / 2009
- Fitting Position: Front Axle
- for PR number: 2E3
- Wear Warning Contact: with integrated wear sensor
- Material: Low-Metallic
- Quantity Unit: Axle Set
- Height 1 [mm]: 72,9
- Height 2 [mm]: 74,8
- Width 2 [mm]: 156,4
- Width 1 [mm]: 155
- Thickness 1 [mm]: 18,1
- Thickness 2 [mm]: 19,1
- WVA Number: 23749
- Test Mark: ECE-R90
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate, with piston clip
- Article number of recommended accessories: 1987474687, 1987474433
- Observe technical data
- Item number: 0 986 494 107
- Our price: 35,45 €
- Manufacturer: BOSCH
- EAN number: 4047024130203
- Condition: New