Mercedes Sprinter W906 315 CDI Axle bushes (150 hp Diesel OM 651.957)
- Supplementary Info: Original VAICO Quality
- Fitting Position: Front Axle Left, Front Axle Right
- Weight [kg]: 0,055
- Inner Diameter 2 [mm]: 12
- Packaging height [cm]: 9
- Packaging Depth [cm]: 5
- Item number: V30-1264
- Manufacturer: VAICO
- EAN number: 4046001281310
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
- Fitting Position: Front Axle
- Payload: not for increased payload
- Brake System: Brembo
- Material: Low-Metallic
- Thickness [mm]: 20,7
- Quantity Unit: Axle Set
- Height [mm]: 67
- Width [mm]: 163
- WVA Number: 29192
- Test Mark: ECE-R90
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate, with mounting manual
- Manufacturer Restriction: Brembo System
- Article number of recommended accessories: 1987473006, 1987473036, 1987474474, 1987474310, 1987474311, 1987473037
- Number of bolts / screws: 4
- Observe technical data
- Item number: 0 986 494 121
- Our price: 43,43 €
- Manufacturer: BOSCH
- EAN number: 4047024221178
- Condition: New
- Fitting Position: Rear Axle
- Brake System: Bosch
- Material: Low-Metallic
- Thickness [mm]: 18,8
- Quantity Unit: Axle Set
- Height [mm]: 63,2
- Width [mm]: 136,7
- WVA Number: 29190
- Test Mark: ECE-R90
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate, with mounting manual
- Article number of recommended accessories: 1987474311, 1987473038, 1987473036
- Observe technical data
- Item number: 0 986 494 123
- Our price: 40,52 €
- Manufacturer: BOSCH
- EAN number: 4047024221192
- Condition: New
- Fitting Position: Rear Axle
- Brake System: Bosch
- Wear Warning Contact: incl. wear warning contact
- Supplementary Article / Supplementary Info: with accessories
- Thickness [mm]: 19,8
- Quantity Unit: Axle Set
- Number of wear indicators [per axle]: 2
- Height [mm]: 63
- Width [mm]: 137
- WVA Number: 29190
- Weight [kg]: 1,5
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- Article number of recommended accessories: 98033800
- Packaging length [cm]: 15,2
- Packaging width [cm]: 8,8
- Packaging height [cm]: 8,4
- Item number: 2919001
- Our price: 53,42 €
- Manufacturer: TEXTAR
- EAN number: 4019722283277
- Condition: New
-
- Fitting Position: Front Axle
- for special equipment code: RS3
- Diameter [mm]: 300
- Brake Disc Type: internally vented
- Brake Disc Thickness [mm]: 28
- Height [mm]: 68,4
- Centering Diameter [mm]: 85
- Hole Arrangement / Number: 06 / 07
- Wheel Bolt Bore Diameter [mm]: 15,6
- Bolt Hole Circle Ø [mm]: 130
- Minimum thickness [mm]: 25
- Inner Diameter [mm]: 155
- Weight [kg]: 9,3
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Packaging length [cm]: 30,8
- Packaging width [cm]: 30,8
- Packaging height [cm]: 16
- Drilled: no
- Item number: 93143200
- Manufacturer: TEXTAR
- EAN number: 4019722275081
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Brake System: Bosch
- Wear Warning Contact: incl. wear warning contact
- Supplementary Article / Supplementary Info: with accessories
- Product line: PREMIER ECO FRICTION
- Quantity Unit: Axle Set
- Number of wear indicators [per axle]: 2
- Height [mm]: 63
- Width [mm]: 136,9
- WVA Number: 29190
- Test Mark: R90 Homologated
- Weight [kg]: 1,75
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- Quantity per axle: 1, 4
- Packing Type: Box
- Number of clips: 8
- Packaging length [cm]: 20,6
- Packaging width [cm]: 12,4
- Packaging height [cm]: 8
- Number of threaded bolts: 2
- Item number: FVR1780
- Our price: 38,97 €
- Manufacturer: FERODO
- EAN number: 4044197337866
- Condition: New
-
- Fitting Position: Front Axle
- Payload: for increased payload
- Article number of recommended accessories: 98033700
- Brake System: Brembo
- Wear Warning Contact: prepared for wear warning indicator
- Supplementary Article / Supplementary Info: with accessories
- Thickness [mm]: 21
- Quantity Unit: Axle Set
- Height [mm]: 74
- Width [mm]: 169
- WVA Number: 29200
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws, with anti-squeak plate
- Item number: P 50 059
- Our price: 36,42 €
- Manufacturer: BREMBO
- EAN number: 8020584059555
- Condition: New
-
- Fitting Position: Front Axle
- Payload: not for increased payload
- Brake System: Brembo PF 2.48
- Wear Warning Contact: incl. wear warning contact
- Supplementary Article / Supplementary Info: with accessories
- Thickness [mm]: 21
- Product line: Prime
- Quantity Unit: Axle Set
- Number of wear indicators [per axle]: 2
- Height [mm]: 67
- Width [mm]: 163
- WVA Number: 29192
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws, with anti-squeak plate
- Warning Contact Length [mm]: 109
- Item number: P 50 085
- Our price: 32,59 €
- Manufacturer: BREMBO
- EAN number: 8020584061244
- Condition: New
- Fitting Position: Front Axle
- Wear Warning Contact: prepared for wear warning indicator
- Quantity Unit: Axle Set
- Length [mm]: 163,2
- Width [mm]: 66,9
- Thickness 1 [mm]: 20,3
- Test Mark: ECE R90 Approved
- Weight [kg]: 2,398
- Supplementary Article / Supplementary Info Info 2: with fastening material
- Observe service information
- Item number: 16710
- Our price: 28,71 €
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816167105
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Diameter [mm]: 300
- Brake Disc Type: internally vented
- Brake Disc Thickness [mm]: 28
- Surface: Coated
- Centering Diameter [mm]: 85
- Rim Hole Number: 6
- Bolt Hole Circle Ø [mm]: 130
- Thickness [mm]: 68,4
- Minimum thickness [mm]: 25
- Weight [kg]: 9,227
- Number of mounting bores: 1
- Observe service information
- Drilled: no
- Item number: 27698
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816276982
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 298
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 16,3
- Surface: Coated
- Centering Diameter [mm]: 85
- Rim Hole Number: 6
- Bolt Hole Circle Ø [mm]: 130
- Thickness [mm]: 71,4
- Minimum thickness [mm]: 14
- Weight [kg]: 7,235
- Number of mounting bores: 1
- Tyres: for single tyres
- Observe service information
- Drilled: no
- Item number: 27699
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816276999
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Brake System: Brembo
- Wear Warning Contact: prepared for wear warning indicator
- Supplementary Article / Supplementary Info: with accessories
- Thickness [mm]: 20,8
- Quantity Unit: Axle Set
- Length [mm]: 163,1
- Height [mm]: 67,1
- Weight [kg]: 2,739
- Supplementary Article / Supplementary Info Info 2: with adhesive film, with bolts / screws
- Item number: 1245.00
- Our price: 27,76 €
- Manufacturer: REMSA
- EAN number: 8427975028228
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 299,5
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 28
- Height [mm]: 68,5
- Surface: Coated
- Centering Diameter [mm]: 85
- Number of Holes: 6
- Bolt Hole Circle Ø [mm]: 130
- Minimum thickness [mm]: 25
- Machining: Alloyed / High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 15,5
- Drilled: no
- Item number: 0 986 479 294
- Manufacturer: BOSCH
- EAN number: 4047024233645
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Brake System: Brembo
- Wear Warning Contact: prepared for wear warning indicator
- Supplementary Article / Supplementary Info: with accessories
- Product line: PREMIER ECO FRICTION
- Quantity Unit: Axle Set
- Height [mm]: 73,5
- Width [mm]: 169,3
- WVA Number: 29200
- Test Mark: R90 Homologated
- Weight [kg]: 3,144
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- Article number of recommended accessories: FWI294
- Quantity per axle: 1, 4
- Packing Type: Box
- Packaging length [cm]: 20,32
- Packaging width [cm]: 12,192
- Packaging height [cm]: 8,128
- Number of threaded bolts: 4
- Item number: FVR1777
- Our price: 44,68 €
- Manufacturer: FERODO
- EAN number: 4044197337804
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Brake System: Brembo
- Wear Warning Contact: prepared for wear warning indicator
- Supplementary Article / Supplementary Info: with accessories
- Product line: PREMIER ECO FRICTION
- Quantity Unit: Axle Set
- Height [mm]: 66,9
- Width [mm]: 163,2
- WVA Number: 29192
- Test Mark: R90 Homologated
- Weight [kg]: 2,67
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- Article number of recommended accessories: FWI294, FWI311
- Quantity per axle: 1, 4
- Packing Type: Box
- Packaging length [cm]: 20,32
- Packaging width [cm]: 12,19
- Packaging height [cm]: 7,62
- Number of threaded bolts: 4
- Item number: FVR1778
- Our price: 37,28 €
- Manufacturer: FERODO
- EAN number: 4044197337828
- Condition: New
- Fitting Position: Rear Axle
- Brake System: Bosch
- Wear Warning Contact: incl. wear warning contact
- Supplementary Article / Supplementary Info: with accessories
- Thickness [mm]: 19
- Quantity Unit: Axle Set
- Number of wear indicators [per axle]: 2
- Height [mm]: 63
- Width [mm]: 137
- WVA Number: 29190
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws, with anti-squeak plate
- Warning Contact Length [mm]: 99
- Item number: P 50 084
- Our price: 37,18 €
- Manufacturer: BREMBO
- EAN number: 8020584061237
- Condition: New
- Fitting Position: Front Axle
- Wear Warning Contact: prepared for wear warning indicator
- Quantity Unit: Axle Set
- Length [mm]: 169,2
- Width [mm]: 73,1
- Thickness 1 [mm]: 20,3
- Test Mark: ECE R90 Approved
- Weight [kg]: 2,770
- Supplementary Article / Supplementary Info Info 2: with fastening material
- Observe service information
- Item number: 16753
- Our price: 37,87 €
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816167532
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Diameter [mm]: 303
- Brake Disc Type: internally vented
- Brake Disc Thickness [mm]: 28
- Surface: Coated
- Centering Diameter [mm]: 120
- Rim Hole Number: 6
- Bolt Hole Circle Ø [mm]: 145
- Thickness [mm]: 93
- Minimum thickness [mm]: 25
- Weight [kg]: 10,320
- Tyres: for dual tyres
- Observe service information
- Drilled: no
- Item number: 27700
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816277002
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Brake System: BOSCH
- Thickness [mm]: 20,2
- Supplementary Info: Q+, original equipment manufacturer quality
- Quantity Unit: Axle Set
- Length [mm]: 136,8
- Height [mm]: 63
- Width [mm]: 136,8
- Weight [kg]: 1,569
- Supplementary Article / Supplementary Info Info 2: with fastening material
- Warning Contact Length [mm]: 95
- Packaging width [cm]: 9
- Packaging height [cm]: 9
- Packaging Depth [cm]: 16
- Item number: V30-8197
- Our price: 47,31 €
- Manufacturer: VAICO
- EAN number: 4046001359767
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
price incl. 19% VAT
- Fitting Position: Front Axle
- Brake System: Brembo
- Wear Warning Contact: prepared for wear warning indicator
- Thickness [mm]: 20,8
- Quantity Unit: Axle Set
- Height 1 [mm]: 66,9
- Height [mm]: 66,9
- Width [mm]: 163,2
- WVA Number: 29192
- Weight [kg]: 2,67
- Article number of recommended accessories: FWI294, FWI311
- Packing Type: Box
- Packaging length [cm]: 20
- Packaging width [cm]: 11
- Packaging height [cm]: 11
- Item number: 2919209560
- Our price: 30,79 €
- Manufacturer: JURID
- EAN number: 3306437093538
- Condition: New