Vehicle identification number: 2131AAV
Honda CR-V IV 1.6 i-DTEC Automatic transmission fluid (120 hp Diesel N16A2)
Recommended part replacement interval for your car for the part category Automatic transmission fluid: every 120.000 km / every 8 years
-
- Transmission Type: 9-Speed Automatic Transmission
- Transmission Code: 9HP48
- Oil Viscosity Classification SAE: ATF III
- Manufacturer recommendations: ATF plus 9, BMW L12108, VW G 060 162, ZF LIFEGUARDFLUID 8, BMW ATF 3+, Fiat 9.55550-AV5, Honda ATF Type 3.1, VW G 055 540
- Product line: -ORIGINAL Quality
- Packing Type: Bottle
- Colour: yellow
- Capacity [litre]: 1
- Item number: 014 019 3200
- Our price: 19,57 €
- Manufacturer: MEYLE
- EAN number: 4040074122747
- Condition: New
Safety data sheet available for professional user on request This is a high-performance reduced-viscosity ATF for improved power transmission. Specially formulated to the requirements of modern 6, 8 and 9-speed automatic transmissions in compliance with the manufacturer's instructions.
price incl. 19% VAT
excl. delivery costs
- Recommended change interval [years]: 5
- Recommended change interval [km]: 80000
- Oil manufacturer recommendation: VW G 055 162, ZF LIFEGUARDFLUID 9, ATF VI, Honda 08200-9017, Ford Mercon LV, BMW M-1375.4, ZF LIFEGUARDFLUID 8, BMW L12108, VW G 060 162, BMW ATF 3+, Honda ATF Type 3.1, Dexron VI, VW G 055 005, Aisin Warner AW-1, Land Rover TYK 50005, Toyota JWS3324, ATF 9HP, Fiat 9.55550-AV5
- Observe system fill quantity
- Observe the vehicle manufacturer specifications
- Chemical Properties: Part Synthetic Oil
- Packing Type: Bottle
- Transmission Type: 6-Speed Automatic Transmission, 8-Speed Automatic Transmission, 9-Speed Automatic Transmission
- Transmission Code: 9HP48
- Colour: yellow
- Capacity [litre]: 1
- Height [mm]: 225
- Width [mm]: 115,0
- Length [mm]: 60
- Item number: V60-0442
- Our price: 37,65 €
- Manufacturer: VAICO
- EAN number: 4062375310012
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
price incl. 19% VAT
excl. delivery costs
Sample photo only
- Recommended change interval [years]: 5
- Recommended change interval [km]: 80000
- Oil manufacturer recommendation: VW G 060 162, BMW M-1375.4, Honda ATF Type 3.1, Toyota JWS3324, VW G 055 162, Aisin Warner AW-1, Fiat 9.55550-AV5, ATF VI, ZF LIFEGUARDFLUID 9, ZF LIFEGUARDFLUID 8, Land Rover TYK 50005, ATF 9HP, Honda 08200-9017, VW G 055 005, Ford Mercon LV, Dexron VI, BMW L12108, BMW ATF 3+
- Observe system fill quantity
- Observe the vehicle manufacturer specifications
- Chemical Properties: Part Synthetic Oil
- Packing Type: Canister
- Transmission Type: 9-Speed Automatic Transmission, 6-Speed Automatic Transmission, 8-Speed Automatic Transmission
- Transmission Code: 9HP48
- Colour: yellow
- Capacity [litre]: 5
- Height [mm]: 230
- Width [mm]: 115,0
- Length [mm]: 300
- Item number: V60-0443
- Our price: 160,62 €
- Manufacturer: VAICO
- EAN number: 4062375309962
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
price incl. 19% VAT
-
- Transmission Type: 9-Speed Automatic Transmission
- Transmission Code: 9HP48
- Oil Viscosity Classification SAE: ATF III
- Manufacturer recommendations: ATF plus 9, BMW L12108, VW G 060 162, ZF LIFEGUARDFLUID 8, BMW ATF 3+, Fiat 9.55550-AV5, Honda ATF Type 3.1, VW G 055 540, Toyota JWS 3324
- Product line: -ORIGINAL Quality
- Packing Type: Canister
- Transmission Type: for 9-speed automatic transmission
- Colour: Colourless
- Capacity [litre]: 10
- Item number: 014 019 3210
- Our price: 170,13 €
- Manufacturer: MEYLE
- EAN number: 4040074366752
- Condition: New
Safety data sheet available for professional user on request This is a high-performance reduced-viscosity ATF for improved power transmission. Specially formulated to the requirements of modern 6, 8 and 9-speed automatic transmissions in compliance with the manufacturer's instructions.
price incl. 19% VAT
-
- Transmission Type: 9-Speed Automatic Transmission
- Transmission Code: 9HP48
- Oil Viscosity Classification SAE: ATF III
- Manufacturer recommendations: ATF plus 9, BMW L12108, VW G 060 162, ZF LIFEGUARDFLUID 8, BMW ATF 3+, Fiat 9.55550-AV5, Honda ATF Type 3.1, VW G 055 540, Toyota JWS 3324
- Product line: -ORIGINAL Quality
- Packing Type: Canister
- Transmission Type: for 9-speed automatic transmission
- Colour: Colourless
- Capacity [litre]: 10
- Item number: 014 019 3212
- Our price: 189,71 €
- Manufacturer: MEYLE
- EAN number: 4040074366769
- Condition: New
Safety data sheet available for professional user on request This is a high-performance reduced-viscosity ATF for improved power transmission. Specially formulated to the requirements of modern 6, 8 and 9-speed automatic transmissions in compliance with the manufacturer's instructions.
price incl. 19% VAT
- Diameter [mm]: 302
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 10
- Fitting Position: Rear Axle
- Height [mm]: 61
- Centering Diameter [mm]: 64,1
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 114,3
- Drilled: no
- Item number: 25211
- Manufacturer: MAPCO
- EAN number: 4043605448989
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 293
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 28,0
- Fitting Position: Front Axle
- Height [mm]: 47,1
- Surface: Coated
- Centering Diameter [mm]: 64,1
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 114,3
- Minimum thickness [mm]: 26
- Inner Diameter [mm]: 155
- Bore Diameter [mm]: 12,7
- Drilled: no
- Item number: C34056ABE
- Manufacturer: ABE
- EAN number: 5900427197626
- Condition: New
- Quantity Unit: Axle Set
- Brake System: SUMITOMO
- Thickness [mm]: 18,5
- Fitting Position: Front Axle
- Number of wear indicators [per axle]: 2
- Height [mm]: 58,5
- Width [mm]: 154,8
- Item number: 05P1634
- Our price: 24,53 €
- Manufacturer: LPR
- EAN number: 8032928097994
- Condition: New
- Quantity Unit: Axle Set
- Wear Warning Contact: with acoustic wear warning
- Thickness [mm]: 16,9
- Fitting Position: Rear Axle
- Supplementary Article / Supplementary Info: with accessories
- Height [mm]: 42,2
- Width [mm]: 108,8
- Test Mark: E1 90R-01831 / 966
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- MAPP code available
- Number of bolts / screws: 2
- Item number: 13.0460-5754.2
- Our price: 48,16 €
- Manufacturer: ATE
- EAN number: 4006633313483
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- TecDoc Engine Number: N16A2
- Construction Year to: 12 / 2018
- Fitting Position: Front Axle
- Quantity Unit: Axle Set
- Wear Warning Contact: with acoustic wear warning
- Thickness [mm]: 19
- Material: Low-Metallic
- Height 1 [mm]: 57
- Height 2 [mm]: 60,3
- Width [mm]: 151
- WVA Number: 24640
- Test Mark: ECE-R90
- Supplementary Article / Supplementary Info Info 2: with mounting manual, with anti-squeak plate, with bolts / screws
- Article number of recommended accessories: 1987474722, 1987474311
- Number of bolts / screws: 2
- Observe technical data
- Item number: 0 986 494 379
- Our price: 34,36 €
- Manufacturer: BOSCH
- EAN number: 4047024784727
- Condition: New
- Quantity Unit: Axle Set
- Wear Warning Contact: with acoustic wear warning
- Fitting Position: Front Axle
- Height 1 [mm]: 60,2
- Width 1 [mm]: 151
- Thickness 1 [mm]: 19
- Item number: J3604001
- Our price: 36,51 €
- Manufacturer: HERTH+BUSS JAKOPARTS
- EAN number: 4029416249915
- Condition: New
quantity 1: 4
price incl. 19% VAT
excl. delivery costs
- Quantity Unit: Axle Set
- Wear Warning Contact: with acoustic wear warning
- Fitting Position: Rear Axle
- Height 1 [mm]: 42,1
- Height 2 [mm]: 42,1
- Width 2 [mm]: 108,7
- Width 1 [mm]: 108,7
- Thickness 1 [mm]: 16,5
- Thickness 2 [mm]: 16,5
- Item number: J3614016
- Our price: 39,99 €
- Manufacturer: HERTH+BUSS JAKOPARTS
- EAN number: 4029416149581
- Condition: New
quantity 1: 2 quantity 2: 2
price incl. 19% VAT
- Quantity Unit: Axle Set
- Wear Warning Contact: with acoustic wear warning
- Fitting Position: Rear Axle
- Supplementary Article / Supplementary Info: with accessories
- Height 1 [mm]: 42
- Width 1 [mm]: 108,9
- Thickness 1 [mm]: 15,5
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate
- Net weight [kg]: 1,01
- Item number: 222641
- Our price: 76,47 €
- Manufacturer: NK
- EAN number: 5703858821869
- Condition: New
price incl. 19% VAT
- Diameter [mm]: 293
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 28
- Fitting Position: Front Axle
- Height [mm]: 47,1
- Centering Diameter [mm]: 64,1
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 114,3
- Drilled: no
- Item number: 25210
- Manufacturer: MAPCO
- EAN number: 4043605448972
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 304,5
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 9,0
- Fitting Position: Rear Axle
- Height [mm]: 61
- Surface: Coated
- Centering Diameter [mm]: 64,1
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 114,3
- Minimum thickness [mm]: 7,5
- Inner Diameter [mm]: 200
- Bore Diameter [mm]: 12,8
- Drilled: no
- Item number: C44034ABE
- Manufacturer: ABE
- EAN number: 5900427204072
- Condition: New
price incl. 19% VAT
-
- TecDoc Engine Number: N16A2
- Construction Year to: 12 / 2018
- Fitting Position: Front Axle
- Diameter [mm]: 293
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 28
- Height [mm]: 47,1
- Surface: Oiled
- Centering Diameter [mm]: 64,1
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 114,3
- Minimum thickness [mm]: 26
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 12,8
- Drilled: no
- Item number: 0 986 479 456
- Manufacturer: BOSCH
- EAN number: 4047024400535
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Quantity Unit: Axle Set
- Wear Warning Contact: with acoustic wear warning
- Fitting Position: Front Axle
- Supplementary Article / Supplementary Info: with accessories
- Height 1 [mm]: 60,5
- Height 2 [mm]: 57,0
- Width 2 [mm]: 151,1
- Width 1 [mm]: 151,1
- Thickness 1 [mm]: 19,3
- Thickness 2 [mm]: 20,0
- Test Mark: E1 90R-011107 / 964
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- MAPP code available
- Number of bolts / screws: 2
- Item number: 13.0460-5753.2
- Our price: 60,72 €
- Manufacturer: ATE
- EAN number: 4006633313469
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 302,0
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 10,0
- Fitting Position: Rear Axle
- Height [mm]: 61
- Surface: Coated
- Centering Diameter [mm]: 64,1
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 114,3
- Minimum thickness [mm]: 8,0
- Inner Diameter [mm]: 200,0
- MAPP code available
- Test Mark: E1 90R-02C0248 / 0999
- Bore Diameter [mm]: 12,5
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0110-0329.1
- Manufacturer: ATE
- EAN number: 4006633311236
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 293,0
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 28,0
- Fitting Position: Front Axle
- Height [mm]: 47,1
- Surface: Coated
- Centering Diameter [mm]: 64,1
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 114,3
- Minimum thickness [mm]: 26,0
- Inner Diameter [mm]: 155,0
- MAPP code available
- Test Mark: E1 90R-02C0118 / 0135
- Bore Diameter [mm]: 12,7
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0128-0217.1
- Manufacturer: ATE
- EAN number: 4006633314596
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- TecDoc Engine Number: N16A2
- Construction Year to: 12 / 2018
- Fitting Position: Rear Axle
- Quantity Unit: Axle Set
- Wear Warning Contact: with acoustic wear warning
- Thickness [mm]: 16,5
- Material: Low-Metallic
- Height [mm]: 42,1
- Width [mm]: 108,8
- WVA Number: 24637
- Test Mark: ECE-R90
- Supplementary Article / Supplementary Info Info 2: with mounting manual, with anti-squeak plate, with bolts / screws
- Article number of recommended accessories: 1987474610, 1987474312
- Number of bolts / screws: 2
- Observe technical data
- Item number: 0 986 494 329
- Our price: 28,93 €
- Manufacturer: BOSCH
- EAN number: 4047024646285
- Condition: New