Audi A3 Saloon 2.0 TFSI Automatic transmission fluid (186 hp Petrol CZRA)
Recommended part replacement interval for your car for the part category Automatic transmission fluid: every 50.000 km
- SAE-Viskositätsklasse: ATF DSG
- Manufacturer recommendations: Porsche 000.043.207, Renault BOT 450 EDC, Fiat 9.55550-MZ6, PSA 9734.S2, Porsche 000.043.20, Chrysler 68044345EA, Mitsubishi Dia Quee, AUDI-VW G 052 529 A2, MB 236.21, MB 236.25, MB 001 989 85 03, Ford 1490761, Ford 1490763, Ford XT-11-QDC, AUDI-VW TL 521 82, AUDI-VW G 052 182 A, BMW DCTF-1, BMW FFL-4, BMW MTF-5, BMW 83 22 2 148 578, BMW 82 22 2 148 579, Ford WSS-M2C 936-A, Ford WSD-M2C00-D2, Volvo 1161838, Volvo 1161839
- Recommended change interval [years]: 5
- Recommended change interval [km]: 60000
- Observe system fill quantity
- Article number of recommended accessories: V10-3025, V10-3223
- Observe the vehicle manufacturer specifications
- Article number of the recommended special tool: V99-1017
- Chemical Properties: Synthetic
- Packing Type: Bottle
- Transmission Type: Dual-Clutch Transmission, not for CVT automatic transmission (stepless)
- Transmission Code: DSG
- Colour: yellow
- Capacity [litre]: 1
- Weight [kg]: 0,96
- Height [mm]: 225
- Width [mm]: 115
- Length [mm]: 60
- Supplementary Info: Q+, original equipment manufacturer quality MADE IN GERMANY
- Item number: V60-0118
- Our price: 26,99 €
- Manufacturer: VAICO
- EAN number: 4046001448485
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
price incl. 19% VAT
excl. delivery costs
- SAE-Viskositätsklasse: ATF DSG
- Manufacturer recommendations: Dia Queen SSTF-I, Fiat 9.55550-MZ6, MB 236.21, Nissan R35 Special, Porsche 000.043.20, PSA 9734.S2, AUDI-VW TL 521 82, BMW FFL-4, BMW 82 22 2 148 579, BMW 83 22 2 148 578, BMW DCTF-1, BMW MTF-5, Ford 1490761, Ford 1490763, Volvo 1161838, Volvo 1161839, AUDI-VW G 052 529 A2, BMW 83 22 0 440 214, Chrysler 68044345EA, Ford WSS-M2C 936-A, Ford XT-11-QDC, MB 236.25, Renault BOT 450 EDC, AUDI-VW G 052 182 A2, BMW 83 22 2 147 477, Ford WSD-M2C00-D2
- Recommended change interval [years]: 5
- Recommended change interval [km]: 60000
- Observe system fill quantity
- Article number of recommended accessories: V10-3025, V10-3223
- Observe the vehicle manufacturer specifications
- Article number of the recommended special tool: V99-1017
- Chemical Properties: Synthetic
- Packing Type: Canister
- Transmission Type: Dual-Clutch Transmission, not for CVT automatic transmission (stepless)
- Colour: yellow
- Capacity [litre]: 5
- Weight [kg]: 4,98
- Height [mm]: 230
- Width [mm]: 115
- Length [mm]: 300
- Supplementary Info: Q+, original equipment manufacturer quality MADE IN GERMANY
- Item number: V60-0224
- Our price: 104,99 €
- Manufacturer: VAICO
- EAN number: 4046001596018
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
price incl. 19% VAT

- SAE-Viskositätsklasse: ATF DCT
- Manufacturer recommendations: VW G 052 529, VW G 055 529, VW G 052 182, BMW DCTF-1, BMW MTF-LT-5, PSA 9734.S2, Chrysler 68044345EA, Chrysler 68044345GA, Fiat 9.55550-MZ6, Ford WSS-M2C936-A, Ford WSS-M2C200-D2, MB 236.21, Mitsubishi SSTF-1, Renault EDC 6, Volvo 1161838, Volvo 1161839
- Recommended change interval [years]: 5
- Recommended change interval [km]: 60000
- Product line: TF DCG
- Observe system fill quantity
- Observe the vehicle manufacturer specifications
- Packing Type: Canister
- Transmission Type: for dual-clutch transmission
- Colour: brown
- Capacity [litre]: 20
- Vehicle type: Car
- Item number: V60-0385
- Our price: 266,00 €
- Manufacturer: VAICO
- EAN number: 4062375063116
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT

- Version: Fluid 7.6 DCT
- Product line: Lifeguard
- Packing Type: Bottle
- Transmission Type: for 7-speed dual-clutch transmission
- Transmission Code: DQ-381, DL-382
- Capacity [litre]: 1
- Vehicle type: Car
- Item number: 5961.308.628
- Our price: 27,49 €
- Manufacturer: ZF GETRIEBE
- EAN number: 4053203440063
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 312
- for PR number: 1ZA, 1ZD
- Brake Disc Type: Vented
- Drilled: no
- Supplementary Info: ORIGINAL Quality
- Brake Disc Thickness [mm]: 25
- Height [mm]: 49,9
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Wheel Bolt Bore Diameter [mm]: 15,3
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 22
- Required quantity: 2
- Item number: 115 521 1094
- Manufacturer: MEYLE
- EAN number: 4040074429006
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 288
- for PR number: 1ZP, 1ZE
- Brake Disc Type: internally vented
- Drilled: no
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Product line: Prime
- Brake Disc Thickness [mm]: 25
- Height [mm]: 50
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 22
- Tightening Torque [Nm]: 120
- Item number: 09.9145.14
- Manufacturer: BREMBO
- EAN number: 8020584013922
- Condition: New
price incl. 19% VAT
- Fitting Position: Front Axle
- Diameter [mm]: 288
- for PR number: 1ZP, 1ZE
- Brake Disc Type: internally vented, slotted
- Drilled: no
- Surface: Coated
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Product line: Xtra
- Brake Disc Thickness [mm]: 25
- Height [mm]: 50
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 22
- Tightening Torque [Nm]: 120
- Item number: 09.9145.75
- Manufacturer: BREMBO
- EAN number: 8020584015162
- Condition: New
For maximum performance in wet conditions, Brembo Max is the affordable grooved and painted disc for the enthusiast.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 312
- for PR number: 1ZA, 1ZD
- Brake Disc Type: internally vented
- Drilled: no
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Product line: Prime
- Brake Disc Thickness [mm]: 25
- Height [mm]: 50
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 22
- Tightening Torque [Nm]: 120
- Item number: 09.9772.10
- Manufacturer: BREMBO
- EAN number: 8020584977217
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 312
- Brake Disc Type: internally vented
- Drilled: no
- Surface: Coated
- Brake Disc Thickness [mm]: 25
- Centering Diameter [mm]: 65
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 50
- Minimum thickness [mm]: 22
- Weight [kg]: 8,6
- Number of mounting bores: 1
- Observe service information
- Item number: 24384
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816243847
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Wear Warning Contact: incl. wear warning contact
- Supplementary Article / Supplementary Info: with spring
- Supplementary Article / Supplementary Info Info 2: with adhesive film
- Thickness [mm]: 20
- Quantity Unit: Axle Set
- Number of wear indicators [per axle]: 1
- Length [mm]: 175,2
- Height [mm]: 69,7
- Warning Contact Length [mm]: 200
- Item number: 1470.01
- Our price: 36,99 €
- Manufacturer: REMSA
- EAN number: 8427975033932
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 288
- for PR number: 1ZE, 1ZP, 1ZQ, 1ZJ
- Brake Disc Type: Vented
- Drilled: no
- Surface: Painted
- Machining: High-carbon
- Brake Disc Thickness [mm]: 25
- Height [mm]: 49,5
- Centering Diameter [mm]: 65
- Number of Holes: 9
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 22
- Thread Size: 15,5
- Colour: black
- Test Mark: E190R-02C0176 / 0490
- Item number: DF4295
- Manufacturer: TRW
- EAN number: 3322937369713
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 312
- for PR number: 1ZA, 1ZD, 1ZK, 1ZL
- Brake Disc Type: Vented
- Drilled: no
- Surface: Painted
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Brake Disc Thickness [mm]: 25
- Height [mm]: 49,9
- Centering Diameter [mm]: 65
- Number of Holes: 9
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 22
- Thread Size: 15,4
- Colour: black
- Test Mark: E190R-02 C0176 / 0613
- Item number: DF4464S
- Manufacturer: TRW
- EAN number: 3322937685219
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 310
- for PR number: 1KJ, 1KY, 1KZ, 2ET, 2ER
- Brake Disc Type: Vented
- Drilled: no
- Surface: Painted
- Machining: High-carbon
- Brake Disc Thickness [mm]: 22
- Height [mm]: 48,3
- Centering Diameter [mm]: 65
- Number of Holes: 9
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 20
- Thread Size: 15,5
- Colour: black
- Test Mark: E190R-02C0185 / 0588
- Item number: DF4754
- Manufacturer: TRW
- EAN number: 3322937546220
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 312
- for PR number: 1ZA, 1ZD
- Brake Disc Type: internally vented, slotted
- Drilled: no
- Surface: Coated
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Product line: Xtra
- Brake Disc Thickness [mm]: 25
- Height [mm]: 50
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 22
- Tightening Torque [Nm]: 120
- Item number: 09.9772.75
- Manufacturer: BREMBO
- EAN number: 8020584029725
- Condition: New
For maximum performance in wet conditions, Brembo Max is the affordable grooved and painted disc for the enthusiast.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Paired product: FDB4434
- Diameter [mm]: 272
- for PR number: 1KE, 1KR
- Brake Disc Type: solid
- Drilled: no
- Surface: Oiled
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Product line: PREMIER
- Brake Disc Thickness [mm]: 10
- Height [mm]: 48
- Centering Diameter [mm]: 65
- Number of Holes: 9
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 9
- Weight [kg]: 6,2
- Tightening Torque [Nm]: 120
- Test Mark: R90 homologated
- Packing Type: Box
- Packaging length [cm]: 27,5
- Packaging width [cm]: 27,5
- Packaging height [cm]: 10,5
- Item number: DDF1895
- Manufacturer: FERODO
- EAN number: 4044197541324
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Paired product: FDB4433
- Diameter [mm]: 312
- for PR number: 1ZA, 1ZD
- Brake Disc Type: Vented
- Drilled: no
- Surface: Oiled
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Product line: PREMIER
- Brake Disc Thickness [mm]: 25
- Height [mm]: 50
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 23
- Weight [kg]: 8,94
- Tightening Torque [Nm]: 120
- Test Mark: R90 homologated
- Packing Type: Box
- Packaging length [cm]: 31,3
- Packaging width [cm]: 31,3
- Packaging height [cm]: 10,4
- Item number: DDF1305
- Manufacturer: FERODO
- EAN number: 4044197335183
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 312
- for PR number: 1ZA, 1ZD
- Brake Disc Type: internally vented
- Drilled: no
- Surface: Coated
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Product line: Prime
- Brake Disc Thickness [mm]: 25
- Height [mm]: 50
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 22
- Tightening Torque [Nm]: 120
- Item number: 09.9772.11
- Manufacturer: BREMBO
- EAN number: 8020584018286
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 310
- for PR number: 1KJ
- Brake Disc Type: internally vented
- Drilled: no
- Surface: Coated
- Brake Disc Thickness [mm]: 22
- Centering Diameter [mm]: 65
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 49
- Minimum thickness [mm]: 20
- Weight [kg]: 7,04
- Number of mounting bores: 1
- Observe service information
- Item number: 24386
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816243861
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 288
- for PR number: 1ZE, 1ZP, 1ZJ, 1ZQ
- Brake Disc Type: Vented
- Drilled: no
- Supplementary Info: ORIGINAL Quality
- Brake Disc Thickness [mm]: 25
- Height [mm]: 49,8
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Wheel Bolt Bore Diameter [mm]: 15,3
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 22
- Required quantity: 2
- Item number: 115 521 1045
- Manufacturer: MEYLE
- EAN number: 4040074336779
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 288
- for PR number: 1ZP, 1ZE
- Brake Disc Type: internally vented
- Drilled: no
- Surface: Coated
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Product line: Prime
- Brake Disc Thickness [mm]: 25
- Height [mm]: 50
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 22
- Tightening Torque [Nm]: 120
- Item number: 09.9145.11
- Manufacturer: BREMBO
- EAN number: 8020584024287
- Condition: New
price incl. 19% VAT
excl. delivery costs