VAUXHALL Combo Mk2 (C) Box Body / Estate (F25) 1.6 CNG 16V Automatic transmission filter (94 hp Petrol/Compressed Natural Gas (CNG) Z 16 YNG)
Recommended part replacement interval for your car for the part category Automatic transmission filter: every 50.000 km / every 24 months
-
- TecDoc Engine Number: Z 16 YNG
- Transmission Type: Automatic Transmission
- Transmission ID: AF13
- Filter type: Screen Filter, Suction Filter
- Housing Type: Synthetic Material Housing
- Observe system fill quantity
- Item number: 207 690
- Our price: 16,04 €
- Manufacturer: TOPRAN
- EAN number: 7034780000014
- Condition: New
Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
- Transmission Type: Automatic Transmission
- Transmission ID: AF13
- See accessories list for additionally required parts
- Transmission Type: 4-Speed Automatic Transmission
- Transmission Code: AF13
- Filter type: Filter Insert
- Supplementary Info: Original VAICO Quality
- Recommended change interval [km]: 80000
- Recommended change interval [years]: 5
- Item number: V40-0895
- Our price: 29,24 €
- Manufacturer: VAICO
- EAN number: 4046001581076
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Diameter [mm]: 260
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 24
- Fitting Position: Front Axle
- Height [mm]: 41,1
- Surface: Oiled
- Centering Diameter [mm]: 60,1
- Number of Holes: 4
- Minimum thickness [mm]: 21
- Test Mark: E1 90R-02C0277 / 1910
- Drilled: no
- Item number: BG3569
- Manufacturer: DELPHI
- EAN number: 5012759174234
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 264
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 10
- Fitting Position: Rear Axle
- Height [mm]: 42,2
- Centering Diameter [mm]: 57
- Number of Holes: 4
- Minimum thickness [mm]: 8
- Drilled: no
- Item number: O1004P
- Manufacturer: LPR
- EAN number: 8032532108727
- Condition: New
price incl. 19% VAT
- Diameter [mm]: 280
- Brake Disc Type: internally vented
- Brake Disc Thickness [mm]: 25
- Fitting Position: Front Axle
- Height [mm]: 42
- Centering Diameter [mm]: 60
- Number of Holes: 4
- Minimum thickness [mm]: 22
- Drilled: no
- Item number: O1006V
- Manufacturer: LPR
- EAN number: 8032532024430
- Condition: New
-
- Fitting Position: Front Axle
- Brake System: TRW
- Diameter [mm]: 280
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 25
- Height [mm]: 42
- Centering Diameter [mm]: 70
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 110
- Minimum thickness [mm]: 22
- Drilled: no
- Item number: BDC4814
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593604889
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year to: 10 / 2011
- Fitting Position: Rear Axle
- Quantity Unit: Axle Set
- Brake System: Lucas / TRW
- Wear Warning Contact: with acoustic wear warning
- Thickness [mm]: 15,3
- Supplementary Article / Supplementary Info: with accessories
- Height [mm]: 42,8
- Width [mm]: 95,3
- Test Mark: E1 90R-02A0333 / 0253, E9 90R-02A1163 / 1231
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- MAPP code available
- Number of bolts / screws: 4
- Item number: 13.0460-2868.2
- Our price: 34,31 €
- Manufacturer: ATE
- EAN number: 4006633104135
- Condition: New
-
- Construction Year to: 10 / 2011
- Fitting Position: Front Axle
- Diameter [mm]: 280,0
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 25,0
- Height [mm]: 42
- Surface: Coated
- Centering Diameter [mm]: 60,0
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100,0
- Minimum thickness [mm]: 22,0
- Inner Diameter [mm]: 139,0
- Machining: Alloyed / High-carbon
- MAPP code available
- No. of holes 2: 6
- Test Mark: E1 90R-02C0115 / 0389
- Bore Diameter [mm]: 14,5
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0125-0148.1
- Manufacturer: ATE
- EAN number: 4006633206037
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- TecDoc Engine Number: Z 16 YNG
- Construction Year to: 01 / 2012
- Fitting Position: Front Axle
- Quantity Unit: Axle Set
- Brake System: ATE
- Wear Warning Contact: with acoustic wear warning
- Thickness [mm]: 19,3
- Material: Low-Metallic
- Height [mm]: 69,7
- Height 2 [mm]: 76
- Width 2 [mm]: 156,4
- Width 1 [mm]: 155,4
- WVA Number: 23844
- Test Mark: ECE-R90
- Supplementary Article / Supplementary Info Info 2: with mounting manual
- Article number of recommended accessories: 1987473018, 1987473033, 1987474098, 1987474179, 1987474973, 1987474312, 1987474382, 1987474480, 1987474587, 1987474241
- Observe technical data
- Item number: 0 986 424 707
- Our price: 27,92 €
- Manufacturer: BOSCH
- EAN number: 3165143659915
- Condition: New
- Diameter [mm]: 240
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 10
- Fitting Position: Rear Axle
- Height [mm]: 40,5
- Surface: Oiled
- Centering Diameter [mm]: 57
- Number of Holes: 4
- Minimum thickness [mm]: 8
- Test Mark: E1 90R-02C0100 / 1602
- Drilled: no
- Item number: BG3771
- Manufacturer: DELPHI
- EAN number: 5012759280683
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 280
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 25
- Fitting Position: Front Axle
- Height [mm]: 43,2
- Surface: Oiled
- Centering Diameter [mm]: 60
- Number of Holes: 4
- Minimum thickness [mm]: 22
- Test Mark: E1 90R-02C0957 / 2551
- Drilled: no
- Item number: BG3989
- Manufacturer: DELPHI
- EAN number: 5012759370292
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Rear Axle
- Brake System: TRW
- Diameter [mm]: 264
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 10
- Height [mm]: 43
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 8
- Drilled: no
- Item number: BDC4816
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593604902
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle
- Braking System: for vehicles with drum brakes on the rear axle
- Diameter [mm]: 261
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 24
- Height [mm]: 41
- Centering Diameter [mm]: 60
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 22
- Drilled: no
- Item number: BDC5219
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593657830
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle
- Braking System: for vehicles with disc brakes on the rear axle
- Diameter [mm]: 280
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 25
- Height [mm]: 42
- Centering Diameter [mm]: 60
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 22
- Drilled: no
- Item number: BDC5455
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593859562
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Rear Axle
- Brake System: TRW
- Diameter [mm]: 264
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 10
- Height [mm]: 42
- Centering Diameter [mm]: 57
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 8
- Drilled: no
- Item number: BDC5456
- Manufacturer: QUINTON HAZELL
- EAN number: 5050438114249
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year to: 10 / 2011
- Fitting Position: Front Axle
- Quantity Unit: Axle Set
- Brake System: ATE
- Wear Warning Contact: without integrated wear warning contact, with acoustic wear warning
- Number of wear indicators [per axle]: 2
- Height 1 [mm]: 69,7
- Height 2 [mm]: 76,0
- Width 2 [mm]: 156,3
- Width 1 [mm]: 155,1
- Thickness 1 [mm]: 20,5
- Thickness 2 [mm]: 20,2
- Test Mark: E1 90R-02A0335 / 0224, E9 90R-02A1162 / 0788
- MAPP code available
- Article number of recommended accessories: 24.8190-0720.2, 24.8190-0018.2
- Observe dimensions
- Item number: 13.0460-7179.2
- Our price: 48,30 €
- Manufacturer: ATE
- EAN number: 4006633117913
- Condition: New
-
- Construction Year to: 10 / 2011
- Fitting Position: Rear Axle
- Quantity Unit: Axle Set
- Brake System: Lucas / TRW
- Wear Warning Contact: with acoustic wear warning
- Thickness [mm]: 15,3
- Product line: Ceramic
- Supplementary Article / Supplementary Info: with accessories
- Height [mm]: 42,8
- Width [mm]: 95,3
- Test Mark: E1 90R-02A0258 / 0226
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- MAPP code available
- Number of bolts / screws: 4
- Permissible up to vehicle capacity [kW]: 225
- Item number: 13.0470-2868.2
- Our price: 47,31 €
- Manufacturer: ATE
- EAN number: 4006633346429
- Condition: New
Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.
-
- Construction Year to: 10 / 2011
- Fitting Position: Front Axle
- Quantity Unit: Axle Set
- Brake System: ATE
- Wear Warning Contact: without integrated wear warning contact, with acoustic wear warning
- Product line: Ceramic
- Number of wear indicators [per axle]: 2
- Height 1 [mm]: 69,7
- Height 2 [mm]: 76,0
- Width 2 [mm]: 156,3
- Width 1 [mm]: 155,1
- Thickness 1 [mm]: 20,5
- Thickness 2 [mm]: 20,2
- Test Mark: E1 90R-02A0258 / 0225
- MAPP code available
- Article number of recommended accessories: 24.8190-0720.2, 24.8190-0018.2
- Observe dimensions
- Permissible up to vehicle capacity [kW]: 225
- Item number: 13.0470-7179.2
- Our price: 67,47 €
- Manufacturer: ATE
- EAN number: 4006633346979
- Condition: New
Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.
-
- Construction Year to: 10 / 2011
- Fitting Position: Rear Axle
- Diameter [mm]: 264,0
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 10,0
- Height [mm]: 42
- Surface: Coated
- Centering Diameter [mm]: 57,0
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100,0
- Minimum thickness [mm]: 8,0
- Inner Diameter [mm]: 145,0
- MAPP code available
- Test Mark: E1 90R-02C0165 / 0701
- Bore Diameter [mm]: 14,0
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0110-0291.1
- Manufacturer: ATE
- EAN number: 4006633209335
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year to: 10 / 2011
- Fitting Position: Front Axle
- Diameter [mm]: 280,0
- Brake Disc Type: Vented
- Product line: PowerDisc
- Brake Disc Thickness [mm]: 25,0
- Height [mm]: 42
- Surface: Coated
- Centering Diameter [mm]: 60,0
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100,0
- Minimum thickness [mm]: 22,0
- Inner Diameter [mm]: 139,0
- Machining: Alloyed / High-carbon
- MAPP code available
- No. of holes 2: 6
- Test Mark: E1 90R-02C0858 / 1213
- Bore Diameter [mm]: 14,5
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0325-0148.1
- Manufacturer: ATE
- EAN number: 4006633312660
- Condition: New
For vehicles without ABS, a PowerDisc can be used on the rea r axle only if there is one on the front axle. The General Operating Permit (ABE) for the PowerDisc applies to operation on German roads in accordance with the German Road Traffic Registration Ordinance (StVZO). Other countries may require additional type approvals for use on roads.
price incl. 19% VAT
excl. delivery costs