Vehicle identification number: 3004717
Renault 19 II Chamade 1.4 Automatic transmission filter (75 hp Petrol E7J 742)
Recommended part replacement interval for your car for the part category Automatic transmission filter: every 50.000 km / every 24 months
- Transmission ID: B1 / B3
- Transmission Code: MB1-033
- Transmission Type: 3-Speed Automatic Transmission
- Weight [kg]: 0,282
- Recommended change interval [km]: 80000
- Recommended change interval [years]: 5
- Packaging width [cm]: 4,8
- Packaging height [cm]: 23,3
- Packaging Depth [cm]: 19,7
- Item number: V46-0674
- Our price: 45,99 €
- Manufacturer: VAICO
- EAN number: 4046001642401
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Transmission ID: B1 / B3
- Transmission Code: MB1-033
- Transmission Type: 3-Speed Automatic Transmission
- See accessories list for additionally required parts
- Filter type: Filter Insert
- Recommended change interval [km]: 80000
- Recommended change interval [years]: 5
- Item number: V46-0672
- Our price: 17,99 €
- Manufacturer: VAICO
- EAN number: 4046001642562
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
Sample photo only
- Transmission Type: 3-Speed Automatic Transmission
- Supplementary Article / Supplementary Info: with gasket / seal
- Material: Rubber
- Item number: 8020079
- Our price: 15,99 €
- Manufacturer: METZGER
- EAN number: 4062101043191
- Condition: New
- Transmission Code: MB1 / MB3
- Filter type: Filter Insert
- Supplementary Article / Supplementary Info Info 2: with oil sump gasket
- Height [mm]: 53
- Width 1 [mm]: 216
- Width 2 [mm]: 97
- Item number: TR-053
- Our price: 16,49 €
- Manufacturer: ALCO FILTER
- EAN number: 5294515803422
- Condition: New
-
- Transmission Type: Automatic Transmission
- Transmission Code: MB1 / MB3
- Filter type: Filter Insert
- Length [mm]: 214
- Width [mm]: 57
- Height [mm]: 53
- Item number: E101H
- Our price: 22,99 €
- Manufacturer: HENGST FILTER
- EAN number: 4030776019360
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 238
- Brake Disc Type: solid
- Drilled: no
- Supplementary Article / Supplementary Info Info 2: with wheel hub
- Brake Disc Thickness [mm]: 8
- Height [mm]: 74,5
- Number of Holes: 4
- Minimum thickness [mm]: 7
- Item number: BG2638
- Manufacturer: DELPHI
- EAN number: 5012759426180
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 238
- Brake Disc Type: solid
- Drilled: no
- Surface: Oiled
- Brake Disc Thickness [mm]: 12
- Height [mm]: 41
- Centering Diameter [mm]: 61
- Number of Holes: 4
- Minimum thickness [mm]: 10,5
- Test Mark: E1 90R-02C0967 / 2516
- Item number: BG2217
- Manufacturer: DELPHI
- EAN number: 5012759422168
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 238
- Brake System: TRW
- Brake Disc Type: solid
- Drilled: no
- Braking / Drive Dynamics: for vehicles with ABS
- Brake Disc Thickness [mm]: 12
- Centering Diameter [mm]: 61
- Number of Holes: 4
- Minimum thickness [mm]: 10,5
- Item number: R1081P
- Manufacturer: LPR
- EAN number: 8032532074206
- Condition: New
price incl. 19% VAT
- Fitting Position: Front Axle
- Diameter [mm]: 259
- Construction Year from: 01 / 1995
- Brake Disc Type: internally vented
- Drilled: no
-
- Transmission Type: Automatic Transmission
- Braking / Drive Dynamics: for vehicles with ABS
- Brake Disc Thickness [mm]: 20,6
- Height [mm]: 41
- Centering Diameter [mm]: 61
- Minimum thickness [mm]: 17,7
- Item number: R1301V
- Manufacturer: LPR
- EAN number: 8032532074343
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 238
- Drilled: no
- Supplementary Article / Supplementary Info Info 2: with wheel bearing kit, with ABS sensor ring
- Supplementary Article / Supplementary Info: with accessories
- Brake Disc Thickness [mm]: 8
- Height [mm]: 74
- Centering Diameter [mm]: 25
- Number of Holes: 4
- Minimum thickness [mm]: 7
- Tightening Torque [Nm]: 175
- Item number: R1411PCA
- Manufacturer: LPR
- EAN number: 8032928093385
- Condition: New
Nut and dust cap included.
- Fitting Position: Front Axle
- Diameter [mm]: 238
- Brake Disc Type: Vented
- Drilled: no
- Brake Disc Thickness [mm]: 20
- Height [mm]: 41
- Centering Diameter [mm]: 61
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 18
- Item number: BDC3546
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593166042
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 238
- Brake Disc Type: solid
- Drilled: no
- Supplementary Article / Supplementary Info Info 2: without integrated wheel bearing, without ABS sensor ring
- Brake Disc Thickness [mm]: 8
- Height [mm]: 74,5
- Centering Diameter [mm]: 52
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 7
- Item number: BDC4402
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593583450
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Brake System: Lucas / TRW
- Construction Year from: 09 / 1994
- Wear Warning Contact: incl. wear warning contact
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate, with brake caliper screws
-
- Braking / Drive Dynamics: for vehicles without ABS, for vehicles with ABS
- Transmission Type: Automatic Transmission, Manual Transmission
- Thickness [mm]: 17,4
- Quantity Unit: Axle Set
- Number of wear indicators [per axle]: 2
- Height [mm]: 64,9
- Width [mm]: 99,9
- Test Mark: E9 90R-02A0247 / 0966
- Warning Contact Length [mm]: 220
- MAPP code available
- Article number of recommended accessories: 13.0460-0240.2, 13.0460-0241.2
- Number of bolts / screws: 4
- Item number: 13.0460-2834.2
- Our price: 24,49 €
- Manufacturer: ATE
- EAN number: 4006633058070
- Condition: New
- Fitting Position: Rear Axle
- Brake System: Bendix
- Wear Warning Contact: not prepared for wear warning indicator, excl. wear warning contact
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Braking / Drive Dynamics: for vehicles with ABS
- Thickness [mm]: 11
- Quantity Unit: Axle Set
- Height [mm]: 54,9
- Width [mm]: 105,0
- Test Mark: E1 90R-01891 / 777
- MAPP code available
- Number of bolts / screws: 4
- Thread Size: M5
- Bolt Head- / Nut Design: Female Torx
- Item number: 13.0460-3822.2
- Our price: 26,99 €
- Manufacturer: ATE
- EAN number: 4006633219105
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 238
- Brake Disc Type: solid
- Drilled: no
- Surface: Coated
- Supplementary Article / Supplementary Info Info 2: without ABS sensor ring
- Braking / Drive Dynamics: for vehicles with ABS
- Brake Disc Thickness [mm]: 8,0
- Height [mm]: 74,6
- Centering Diameter [mm]: 52,0
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100,0
- Minimum thickness [mm]: 7,0
- Inner Diameter [mm]: 52,3
- Thread Size: M12x1,5
- MAPP code available
- Item number: 24.0108-0108.1
- Manufacturer: ATE
- EAN number: 4006633282024
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 238
- Brake Disc Type: solid
- Drilled: no
- Supplementary Article / Supplementary Info Info 2: without ABS sensor ring
- Brake Disc Thickness [mm]: 8
- Height [mm]: 74,6
- Centering Diameter [mm]: 52,3
- Number of Holes: 4
- Thickness [mm]: 8
- Minimum thickness [mm]: 7
- Item number: C4R007ABE
- Manufacturer: ABE
- EAN number: 5900427206199
- Condition: New
price incl. 19% VAT
- Fitting Position: Rear Axle
- Diameter [mm]: 238
- Brake Disc Type: solid
- Drilled: no
- Surface: Oiled
- Supplementary Article / Supplementary Info Info 2: with wheel bearing, with ABS sensor ring
- Brake Disc Thickness [mm]: 8
- Height [mm]: 74,6
- Centering Diameter [mm]: 25
- Number of Holes: 4
- Minimum thickness [mm]: 7
- Test Mark: E1 90R-02C0543 / 1779
- Item number: BG9025RS
- Manufacturer: DELPHI
- EAN number: 5012759396278
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 238
- Brake Disc Type: solid
- Drilled: no
- Brake Disc Thickness [mm]: 12
- Height [mm]: 41
- Centering Diameter [mm]: 61
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 10,5
- Item number: BDC3249
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593006577
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 238
- Construction Year to: 12 / 1994
- Construction Year from: 09 / 1994
- Brake Disc Type: solid
- Drilled: no
-
- Transmission Type: Manual Transmission, Automatic Transmission
- Braking / Drive Dynamics: for vehicles without ABS, for vehicles with ABS
- Brake Disc Thickness [mm]: 12,0
- Height [mm]: 41
- Centering Diameter [mm]: 61,0
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100,0
- Minimum thickness [mm]: 10,5
- Inner Diameter [mm]: 129,5
- Bore Diameter [mm]: 12,8
- Item number: BAR12116
- Manufacturer: Barum
- EAN number: 4006633322263
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Brake System: Bendix
- Construction Year from: 09 / 1994
- Wear Warning Contact: incl. wear warning contact
- Thickness [mm]: 18
- Quantity Unit: Axle Set
- Number of wear indicators [per axle]: 2
- Height [mm]: 54,0
- Width [mm]: 105,0
- Warning Contact Length [mm]: 183
- MAPP code available
- Article number of recommended accessories: 13.0460-0402.2, 13.0460-0403.2, 13.0460-0404.2, 13.0460-0411.2
- Observe dimensions
- ABE No.: KBA 60521
- Item number: 13.0460-3911.2
- Our price: 18,99 €
- Manufacturer: ATE
- EAN number: 4006633096935
- Condition: New