Nissan Primera P10 Hatchback 2.0 Pollen filter (150 hp Petrol SR20DE)
Recommended part replacement interval for your car for the part category Pollen filter: every 5.000 km
- Filter type: Filter Insert
- Length [mm]: 263
- Width [mm]: 205
- Height [mm]: 20
- Item number: 50013934
- Our price: 22,99 €
- Manufacturer: KOLBENSCHMIDT
- EAN number: 4028977563195
- Condition: New
- Filter type: Pollen Filter
- Item number: 1435
- Our price: 26,99 €
- Manufacturer: 3F QUALITY
- EAN number: 8636001119216
- Condition: New
ATTENTION: Only the numeric part of the reference is presented here on TecDoc. Please refer to the original box for the complete code of this article.
- Filter type: Particulate Filter
- Length [mm]: 206
- Width [mm]: 193
- Height [mm]: 16
- Item number: 80000610
- Our price: 23,49 €
- Manufacturer: CORTECO
- EAN number: 3358960213679
- Condition: New
- Filter type: Activated Carbon Filter
- Item number: 435
- Our price: 31,99 €
- Manufacturer: 3F QUALITY
- EAN number: 8636001110633
- Condition: New
ATTENTION: Only the numeric part of the reference is presented here on TecDoc. Please refer to the original box for the complete code of this article.
- Filter type: Pollen Filter, Filter Insert
- Vehicle Equipment: for vehicles without air conditioning
- Material: Paper
- Length [mm]: 204
- Width [mm]: 187
- Thickness [mm]: 34
- Frame Material: Plastic
- Weight [kg]: 0,074
- Packaging height [cm]: 1,6
- Item number: A38-30-1001
- Our price: 17,49 €
- Manufacturer: ACKOJA
- EAN number: 4062375101597
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Rear Axle
- Diameter [mm]: 258
- Brake Disc Type: solid
- Drilled: no
- Brake Disc Thickness [mm]: 10
- Height [mm]: 45
- Centering Diameter [mm]: 68
- Number of Holes: 4
- Thickness [mm]: 10
- Minimum thickness [mm]: 9
- Item number: C41028ABE
- Manufacturer: ABE
- EAN number: 5900427203068
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 257
- Brake System: TRW
- Brake Disc Type: Vented
- Drilled: no
- Surface: Oiled
-
- Braking / Drive Dynamics: for vehicles with ABS
- for model code: P10
- Brake Disc Thickness [mm]: 22
- Height [mm]: 49,3
- Centering Diameter [mm]: 68
- Number of Holes: 4
- Minimum thickness [mm]: 20
- Test Mark: E1 90R-02C0074 / 1561
- Item number: BG2567
- Manufacturer: DELPHI
- EAN number: 5012759425619
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 242
- Brake System: Akebono
- Brake Disc Type: Vented
- Drilled: no
- Surface: Oiled
- for model code: P10
- Brake Disc Thickness [mm]: 20
- Height [mm]: 49,5
- Centering Diameter [mm]: 68
- Number of Holes: 4
- Minimum thickness [mm]: 18
- Test Mark: E1 90R-02C0074 / 0506
- Item number: BG2632
- Manufacturer: DELPHI
- EAN number: 5012759426135
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 258
- Brake Disc Type: solid
- Drilled: no
- Brake Disc Thickness [mm]: 10
- Height [mm]: 45
- Centering Diameter [mm]: 68
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 114
- Minimum thickness [mm]: 9
- Item number: BDC3792
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593256538
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Brake System: Lucas / TRW
- Wear Warning Contact: excl. wear warning contact
- Thickness [mm]: 16,7
- Quantity Unit: Axle Set
- Height [mm]: 57,4
- Width [mm]: 129,2
- Test Mark: E9 90R-01229 / 135
- MAPP code available
- Item number: 13.0460-5950.2
- Our price: 22,99 €
- Manufacturer: ATE
- EAN number: 4006633269315
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Brake System: Lucas-Girling
- Supplementary Article / Supplementary Info: with accessories
- Supplementary Article / Supplementary Info Info 2: with bolts / screws, with mounting manual, with anti-squeak plate
- Thickness [mm]: 14,5
- Quantity Unit: Axle Set
- Height [mm]: 56,9
- Width [mm]: 83,4
- WVA Number: 21545
- Test Mark: ECE-R90
- Number of bolts / screws: 2
- Observe technical data
- Item number: 0 986 460 993
- Our price: 21,49 €
- Manufacturer: BOSCH
- EAN number: 3165143659328
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 258
- Brake Disc Type: solid
- Drilled: no
- Surface: Coated
- Brake Disc Thickness [mm]: 10
- Height [mm]: 45
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 114,3
- Minimum thickness [mm]: 9
- Inner Diameter [mm]: 154
- Hub Diameter [mm]: 68
- No. of holes 1: 2
- fulfils ECE norm: E1 90R-02C0122 / 0264
- Item number: J3311028
- Manufacturer: HERTH+BUSS JAKOPARTS
- EAN number: 4029416052911
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 257
- Brake Disc Type: internally vented
- Drilled: no
- Surface: Coated
- Brake Disc Thickness [mm]: 22
- Height [mm]: 49,1
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 114,3
- Minimum thickness [mm]: 20
- Inner Diameter [mm]: 143,9
- Hub Diameter [mm]: 68
- No. of holes 1: 2
- Item number: J3301056
- Manufacturer: HERTH+BUSS JAKOPARTS
- EAN number: 4029416049652
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 257
- Brake Disc Type: Vented
- Drilled: no
- Brake Disc Thickness [mm]: 22
- Height [mm]: 49,3
- Centering Diameter [mm]: 68
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 114
- Minimum thickness [mm]: 20
- Item number: BDC3775
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593240544
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Brake System: Lucas / TRW
- Wear Warning Contact: excl. wear warning contact
- Thickness [mm]: 14,9
- Quantity Unit: Axle Set
- Height [mm]: 57,0
- Width [mm]: 82,2
- Test Mark: E9 90R-01231 / 1294
- MAPP code available
- Item number: 13.0460-5986.2
- Our price: 31,49 €
- Manufacturer: ATE
- EAN number: 4006633022880
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 258,0
- Brake Disc Type: solid
- Drilled: no
- Surface: Coated
- Brake Disc Thickness [mm]: 10,0
- Height [mm]: 45
- Centering Diameter [mm]: 68,0
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 114,3
- Minimum thickness [mm]: 9,0
- Inner Diameter [mm]: 154,0
- MAPP code available
- Test Mark: E1 90R-02C0165 / 0831
- Bore Diameter [mm]: 12,6
- Item number: 24.0110-0215.1
- Manufacturer: ATE
- EAN number: 4006633282055
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 257,0
- Brake Disc Type: Vented
- Drilled: no
- Surface: Coated
- Brake Disc Thickness [mm]: 22,0
- Height [mm]: 49,2
- Centering Diameter [mm]: 68,0
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 114,3
- Minimum thickness [mm]: 20,0
- Inner Diameter [mm]: 144,0
- MAPP code available
- Test Mark: E1 90R-02C0115 / 0451
- Bore Diameter [mm]: 12,6
- Item number: 24.0122-0146.1
- Manufacturer: ATE
- EAN number: 4006633282109
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Brake System: Lucas-Girling
- Material: Low-Metallic
- Thickness [mm]: 16,65
- Quantity Unit: Axle Set
- Height [mm]: 57,2
- Width [mm]: 129,4
- WVA Number: 21546
- Test Mark: ECE-R90
- Article number of recommended accessories: 1987474319, 1987474384, 1987474359
- Observe technical data
- Item number: 0 986 461 147
- Our price: 20,99 €
- Manufacturer: BOSCH
- EAN number: 3165143662472
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 257,8
- Brake Disc Type: solid
- Drilled: no
- Surface: Oiled
- Brake Disc Thickness [mm]: 10
- Height [mm]: 45
- Centering Diameter [mm]: 68
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 114,3
- Minimum thickness [mm]: 9
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 12,8
- Item number: 0 986 478 564
- Manufacturer: BOSCH
- EAN number: 3165142302065
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 257
- Brake Disc Type: Vented, internally vented
- Drilled: no
- Surface: Oiled
- Brake Disc Thickness [mm]: 22
- Height [mm]: 49
- Centering Diameter [mm]: 68,02
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 114,3
- Minimum thickness [mm]: 20
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 12,6
- Item number: 0 986 478 567
- Manufacturer: BOSCH
- EAN number: 4047024095212
- Condition: New
price incl. 19% VAT
excl. delivery costs
What does cabin filter replacement cost for the NISSAN Primera Hatchback (P10) 2.0 150hp / 110kW?
The average cost of replacing the cabin filter is from $30 to $130.
What size cabin air filter fits the NISSAN Primera Hatchback (P10) 2.0 150hp / 110kW?
Cabin air filter size:
- Length [mm]: from 204 to 263
- Width [mm]: from 82.2 to 205
- Height [mm]: from 16 to 57.4