TOYOTA HIACE II Wagon (LH7_, LH5_, LH6_, YH7_, YH6_, YH5_) 2.0 4WD (YH51) (65 kW / 88 hp) 1987
HiAce II 2.0 4WD Abs ring (88 hp Petrol 3Y)
3 items
VEMO V70-92-0005 ABS sensor ring Front axle both sides, Original VEMO Quality
Article number: V70-92-0005
Submit a review
- Fitting Position: Front axle both sides
- Inner Diameter [mm]: 72,9
- Width [mm]: 7,1
- Number of Teeth, ABS ring: 48
- Supplementary Info: Original VEMO Quality
- Diameter [mm]: 80
- Item number: V70-92-0005
- Manufacturer: VEMO
- EAN number: 4046001957574
- Condition: New
Show OEM numbers of the product
Additional information
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
Details
MAXGEAR 27-0353 ABS sensor ring Number of Teeth: 48, Front axle both sides
Article number: 27-0353
Submit a review
- Fitting Position: Front axle both sides
- Width [mm]: 7,1
- Number of Teeth: 48
- Inner Diameter [mm]: 73
- Diameter [mm]: 80
- Item number: 27-0353
- Manufacturer: MAXGEAR
- EAN number: 5902659718372
- Condition: New
Show OEM numbers of the product
Details
TRISCAN 8540 13403 ABS sensor ring Front axle both sides
Article number: 8540 13403
Submit a review
- Fitting Position: Front axle both sides
- Inner Diameter [mm]: 72,9
- Width [mm]: 7,1
- Number of Teeth, ABS ring: 48
- Diameter [mm]: 80
- Item number: 8540 13403
- Manufacturer: TRISCAN
- EAN number: 5710476142047
- Condition: New
Details
In stock (Item(s) left: 5)
-31%
compared to
RRP 49,20 €
33,99 €
price incl. 19% VAT
excl. delivery costs
TOYOTA HIACE II Wagon (LH7_, LH5_, LH6_, YH7_, YH6_, YH5_) 2.0 4WD (YH51) Bestsellers
DELPHI BG2423 Brake disc Front Axle, 257x25mm, 5, Vented
Article number: BG2423
Reviews - 2
- Fitting Position: Front Axle
- Diameter [mm]: 257
- Brake Disc Type: Vented
- Drilled: no
- Surface: Oiled
- Brake Disc Thickness [mm]: 25
- Height [mm]: 46,5
- Centering Diameter [mm]: 84,1
- Number of Holes: 5
- Minimum thickness [mm]: 24
- Test Mark: E1 90R-02C0074 / 1561
- Item number: BG2423
- Manufacturer: DELPHI
- EAN number: 5012759424223
- Condition: New
Show OEM numbers of the product
Details
In stock
-64%
compared to
RRP 77,41 €
27,99 €
Price per item
price incl. 19% VAT
excl. delivery costs
TRW DF1927 Brake disc Front Axle, 257x25mm, 5x110, Vented
Article number: DF1927
Submit a review
- Fitting Position: Front Axle
- Diameter [mm]: 257
- Brake Disc Type: Vented
- Drilled: no
- Surface: Painted
- Brake Disc Thickness [mm]: 25
- Height [mm]: 46,6
- Centering Diameter [mm]: 84
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 110
- Minimum thickness [mm]: 23
- Thread Size: M10 x 1.25
- Colour: black
- Test Mark: E190R-02C0176 / 0074
- Item number: DF1927
- Manufacturer: TRW
- EAN number: 3322936192701
- Condition: New
Show OEM numbers of the product
Details
In stock (Item(s) left: 6)
-73%
compared to
RRP 126,79 €
33,99 €
Price per item
price incl. 19% VAT
excl. delivery costs
TRW GDB3109 Brake pad set Front Axle, not prepared for wear warning indicator
Article number: GDB3109
Submit a review
- Fitting Position: Front Axle
- Wear Warning Contact: not prepared for wear warning indicator
- not for country specific design: Denmark
- Thickness [mm]: 16,2
- Quantity Unit: Axle Set
- Height [mm]: 55
- Width [mm]: 140,2
- Test Mark: E9 90R 01107 / 106
- Manufacturer Restriction: SUMITOMO
- Item number: GDB3109
- Our price: 30,49 €
- Manufacturer: TRW
- EAN number: 3322937138012
- Condition: New
Show OEM numbers of the product
Details
In stock (Item(s) left: 2)
-45%
compared to
RRP 55,81 €
30,49 €
price incl. 19% VAT
excl. delivery costs
TRW GDB351 Brake pad set Front Axle, not prepared for wear warning indicator
Article number: GDB351
Submit a review
- Fitting Position: Front Axle
- Wear Warning Contact: not prepared for wear warning indicator
- not for country specific design: Denmark
- Thickness [mm]: 15,6
- Quantity Unit: Axle Set
- Height [mm]: 55,5
- Width [mm]: 142,6
- Test Mark: E9 90R 01107 / 107
- Manufacturer Restriction: AKEBONO
- Item number: GDB351
- Our price: 29,99 €
- Manufacturer: TRW
- EAN number: 3322936403517
- Condition: New
Show OEM numbers of the product
Details
In stock (Item(s) left: 2)
-65%
compared to
RRP 87,11 €
29,99 €
price incl. 19% VAT
excl. delivery costs
BLUE PRINT ADT34229 Brake pad set Front Axle
Article number: ADT34229
Submit a review
- Fitting Position: Front Axle
- Quantity Unit: Axle Set
- Length [mm]: 140
- Width [mm]: 55
- Thickness 1 [mm]: 16
- Test Mark: ECE R90 Approved
- Weight [kg]: 1,546
- Observe service information
- Item number: ADT34229
- Our price: 20,99 €
- Manufacturer: BLUE PRINT
- EAN number: 5050063342291
- Condition: New
Show OEM numbers of the product
Additional information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Details
In stock (Item(s) left: 3)
-59%
compared to
RRP 50,40 €
20,99 €
price incl. 19% VAT
excl. delivery costs
DELPHI LP989 Brake pad set Front Axle, not prepared for wear warning indicator
Article number: LP989
Submit a review
- Fitting Position: Front Axle
- Brake System: Sumitomo
- Wear Warning Contact: not prepared for wear warning indicator
- Supplementary Article / Supplementary Info: without accessories
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate
- Country Specific Design: Denmark
- Quantity Unit: Axle Set
- Height 1 [mm]: 56,9
- Height 2 [mm]: 56,9
- Width 2 [mm]: 145,8
- Width 1 [mm]: 145,8
- Thickness 1 [mm]: 15
- Thickness 2 [mm]: 15
- WVA Number: 21468
- Test Mark: E9 90R-02A0823 / 0148
- FMSI Code: D1344
- Friction Lining Material: Low-Metallic
- Item number: LP989
- Our price: 72,99 €
- Manufacturer: DELPHI
- EAN number: 5012759961537
- Condition: New
Show OEM numbers of the product
Additional information
4 identical pads
Details
Free delivery on this item
In stock (Item(s) left: 2)
-10%
compared to
RRP 81,52 €
72,99 €
price incl. 19% VAT
DELPHI LP538 Brake pad set Front Axle, prepared for wear warning indicator
Article number: LP538
Submit a review
- Fitting Position: Front Axle
- Brake System: Akebono
- Wear Warning Contact: prepared for wear warning indicator
- Supplementary Article / Supplementary Info: without accessories
- Supplementary Article / Supplementary Info Info 2: without anti-squeak plate
- Country Specific Design: Denmark
- Quantity Unit: Axle Set
- Height 1 [mm]: 55,5
- Height 2 [mm]: 55,5
- Width 2 [mm]: 142,8
- Width 1 [mm]: 142,8
- Thickness 1 [mm]: 15,5
- Thickness 2 [mm]: 15,5
- WVA Number: 21158
- Test Mark: E9 90R-01823 / 3206
- FMSI Code: D303-7205
- Friction Lining Material: Low-Metallic
- Item number: LP538
- Our price: 58,49 €
- Manufacturer: DELPHI
- EAN number: 8019951023701
- Condition: New
Show OEM numbers of the product
Additional information
4 identical pads
Details
Free delivery on this item
In stock (Item(s) left: 1)
-9%
compared to
RRP 64,19 €
58,49 €
price incl. 19% VAT
FEBI BILSTEIN 108636 Brake disc Front Axle, 257x25mm, 5x110, internally vented
Article number: 108636
Submit a review
- Fitting Position: Front Axle
- Diameter [mm]: 257
- Brake Disc Type: internally vented
- Drilled: no
- Surface: Coated
- Brake Disc Thickness [mm]: 25
- Centering Diameter [mm]: 84
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 110
- Thickness [mm]: 47
- Minimum thickness [mm]: 24
- Weight [kg]: 5,6
- Observe service information
- Item number: 108636
- Manufacturer: FEBI BILSTEIN
- EAN number: 4054224086360
- Condition: New
Show OEM numbers of the product
Additional information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Details
In stock
-67%
compared to
RRP 106,20 €
34,49 €
Price per item
price incl. 19% VAT
excl. delivery costs
FEBI BILSTEIN 116375 Brake pad set Front Axle
Article number: 116375
Submit a review
- Fitting Position: Front Axle
- Length [mm]: 140
- Width [mm]: 55
- Thickness 1 [mm]: 16
- Test Mark: ECE R90 Approved
- Weight [kg]: 1,546
- Observe service information
- Item number: 116375
- Our price: 23,49 €
- Manufacturer: FEBI BILSTEIN
- EAN number: 4054224163757
- Condition: New
Show OEM numbers of the product
Additional information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Details
NK 209949 Brake disc Front Axle, 257x25mm, 5, Vented
Article number: 209949
Submit a review
- Fitting Position: Front Axle
- Diameter [mm]: 257
- Brake Disc Type: Vented
- Drilled: no
- Surface: Oiled
- Brake Disc Thickness [mm]: 25
- Height [mm]: 46,5
- Centering Diameter [mm]: 84
- Rim Hole Number: 5
- Minimum thickness [mm]: 24
- Net weight [kg]: 5,63
- Item number: 209949
- Manufacturer: NK
- EAN number: 5703858180652
- Condition: New
Show OEM numbers of the product
Details
In stock (Item(s) left: 2)
-52%
compared to
RRP 103,53 €
48,99 €
Price per item
price incl. 19% VAT
excl. delivery costs
TRW COTEC GDB770 Brake pad set Front Axle, not prepared for wear warning indicator
Article number: GDB770
Reviews - 1
- Fitting Position: Front Axle
- Wear Warning Contact: not prepared for wear warning indicator
- Supplementary Article / Supplementary Info: with accessories
- Supplementary Article / Supplementary Info Info 2: with adhesive film
- Country Specific Design: Denmark
- Thickness [mm]: 16,3
- Product line: COTEC
- Quantity Unit: Axle Set
- Height [mm]: 56,9
- Width [mm]: 145,4
- Test Mark: E9 90R - 01107 / 148
- Manufacturer Restriction: SUMITOMO
- Item number: GDB770
- Our price: 30,49 €
- Manufacturer: TRW
- EAN number: 3322936407706
- Condition: New
Show OEM numbers of the product
Details
In stock (Item(s) left: 2)
-65%
compared to
RRP 89,13 €
30,49 €
price incl. 19% VAT
excl. delivery costs
BLUE PRINT ADT34324 Brake disc Front Axle, 257x25mm, 5x110, internally vented
Article number: ADT34324
Reviews - 1
- Fitting Position: Front Axle
- Diameter [mm]: 257
- Brake Disc Type: internally vented
- Drilled: no
- Surface: Coated
- Brake Disc Thickness [mm]: 25
- Centering Diameter [mm]: 84
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 110
- Thickness [mm]: 47
- Minimum thickness [mm]: 24
- Weight [kg]: 5,6
- Observe service information
- Item number: ADT34324
- Manufacturer: BLUE PRINT
- EAN number: 5050063343243
- Condition: New
Show OEM numbers of the product
Additional information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Details
In stock (Item(s) left: 2)
-70%
compared to
RRP 106,20 €
31,49 €
Price per item
price incl. 19% VAT
excl. delivery costs
A.B.S. 15659 Brake disc Front Axle, 257x25mm, 5x110, Vented
Article number: 15659
Submit a review
- Fitting Position: Front Axle
- Diameter [mm]: 257
- Brake Disc Type: Vented
- Drilled: no
- Brake Disc Thickness [mm]: 25
- Height [mm]: 46,5
- Centering Diameter [mm]: 84
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 110
- Minimum thickness [mm]: 24
- Hub Diameter [mm]: 134
- Weight [kg]: 5,63
- Item number: 15659
- Manufacturer: A.B.S.
- EAN number: 8717109005974
- Condition: New
Show OEM numbers of the product
Details
In stock
-61%
compared to
RRP 86,69 €
33,99 €
Price per item
price incl. 19% VAT
excl. delivery costs
A.B.S. 36603 Brake pad set Front Axle, without integrated wear sensor
Article number: 36603
Submit a review
- Fitting Position: Front Axle
- Brake System: AKEBONO
- Wear Warning Contact: without integrated wear sensor
- not for country specific design: Denmark
- Quantity Unit: Axle Set
- Height 1 [mm]: 55,6
- Width 1 [mm]: 142,5
- Thickness 1 [mm]: 15,6
- Weight [kg]: 1,45
- Manufacturer Restriction: SUMITOMO
- Item number: 36603
- Our price: 21,49 €
- Manufacturer: A.B.S.
- EAN number: 8717109042535
- Condition: New
Show OEM numbers of the product
Details
A.B.S. 36702 Brake pad set Front Axle, without integrated wear sensor
Article number: 36702
Submit a review
- Fitting Position: Front Axle
- Brake System: AKEBONO
- Wear Warning Contact: without integrated wear sensor
- Country Specific Design: Denmark
- Quantity Unit: Axle Set
- Height 1 [mm]: 56,9
- Width 1 [mm]: 145,4
- Thickness 1 [mm]: 15,5
- Weight [kg]: 1,71
- Manufacturer Restriction: SUMITOMO
- Item number: 36702
- Our price: 23,99 €
- Manufacturer: A.B.S.
- EAN number: 8717109045482
- Condition: New
Show OEM numbers of the product
Details
MAXGEAR 19-1509 Brake pad set Front Axle, not prepared for wear warning indicator
Article number: 19-1509
Submit a review
- Fitting Position: Front Axle
- Wear Warning Contact: not prepared for wear warning indicator
- Thickness [mm]: 16,3
- Quantity Unit: Axle Set
- Height [mm]: 56,9
- Width [mm]: 145
- Manufacturer Restriction: SUMITOMO
- Item number: 19-1509
- Our price: 34,99 €
- Manufacturer: MAXGEAR
- EAN number: 5902659715807
- Condition: New
Show OEM numbers of the product
Details
MAXGEAR 19-4773 Brake disc Front Axle, 257x25mm, 5x110, internally vented
Article number: 19-4773
Submit a review
- Fitting Position: Front Axle
- Diameter [mm]: 257
- Brake Disc Type: internally vented
- Drilled: no
- Brake Disc Thickness [mm]: 25
- Height [mm]: 46
- Centering Diameter [mm]: 84
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 110
- Minimum thickness [mm]: 24
- Item number: 19-4773
- Manufacturer: MAXGEAR
- EAN number: 5903766393094
- Condition: New
Show OEM numbers of the product
Details
Find the best offers on