• SHOP
  • CLUB
0
My Garage
Add vehicle
0
items #
0,00 €
Your basket is empty

Audi A3 Saloon 2.0 TDI Abs ring (136 hp Diesel CRBD)

Manufacturers
5 items
  • Fitting Position: Rear Axle Left, Rear Axle Right
  • Inner Diameter [mm]: 72
  • Width [mm]: 7
  • Number of Teeth: 86
  • Diameter [mm]: 78
  • Item number: 59122
  • Manufacturer: AIC
  • EAN number: 4046283591220
  • Condition: New
Show OEM numbers of the product
Additional information

Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use.

For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules.

If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at:

Phone: 040 - 25 30 66 55 Email: [email protected]

This often avoids extensive troubleshooting that is disproportionate to normal repair times.

The following applies to complaints: The more complete the processes are submitted, the faster they can be processed.

Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

Details
In stock
-61%
compared to RRP 22,59 €

8,59 €

price incl. 19% VAT

excl. delivery costs

  • Fitting Position: Rear Axle both sides
  • Inner Diameter [mm]: 71,95
  • Width [mm]: 7
  • Supplementary Article / Supplementary Info Info 2: with integrated magnetic sensor ring
  • for article number: 8530 29229
  • Number of pins: 86
  • Diameter [mm]: 78,2
  • Item number: 8540 29412
  • Manufacturer: TRISCAN
  • EAN number: 5710476274182
  • Condition: New
Details
In stock (Item(s) left: 3)
11,01 €

price incl. 19% VAT

excl. delivery costs

  • Fitting Position: Rear Axle both sides
  • Width [mm]: 7
  • Supplementary Article / Supplementary Info Info 2: with integrated magnetic sensor ring
  • Inner Diameter [mm]: 72
  • Number of pins: 86
  • for article number: 8530 29229
  • Diameter [mm]: 78
  • Item number: 27-0713
  • Manufacturer: MAXGEAR
  • EAN number: 5903364316754
  • Condition: New
Show OEM numbers of the product
Details
In stock
15,52 €

price incl. 19% VAT

excl. delivery costs

  • Inner Diameter [mm]: 71,95
  • Width [mm]: 7
  • Fitting Position: Rear Axle both sides
  • Number of Teeth, ABS ring: 86
  • Supplementary Info: Original VEMO Quality
  • Diameter [mm]: 78,2
  • Item number: V10-92-1503
  • Manufacturer: VEMO
  • EAN number: 4046001957161
  • Condition: New
Show OEM numbers of the product
Additional information

In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.

installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.

measurement, including photos.

For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.

When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.

If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

Details
In stock
-49%
compared to RRP 61,88 €

31,09 €

price incl. 19% VAT

excl. delivery costs

  • Fitting Position: Rear Axle both sides
  • Supplementary Article / Supplementary Info Info 2: with integrated magnetic sensor ring
  • Number of pins: 86
  • Width [mm]: 7
  • Inner Diameter [mm]: 72
  • for article number: 8530 29229
  • Diameter [mm]: 78
  • Item number: 8540 29412
  • Manufacturer: KAWE
  • EAN number: 5710476274182
  • Condition: New
Details
Сurrently out of stock
-45%
compared to RRP 69,38 €

37,70 €

price incl. 19% VAT

excl. delivery costs

AUDI A3 Saloon (8VS, 8VM) 2.0 TDI Bestsellers
    • Fitting Position: Front Axle
    • for PR number: 1ZE, 1ZP
  • Diameter [mm]: 288
  • Brake Disc Type: internally vented
  • Brake Disc Thickness [mm]: 25
  • Height [mm]: 49,5
  • Centering Diameter [mm]: 65
  • Number of Holes: 5
  • Minimum thickness [mm]: 22
  • Drilled: no
  • Item number: A1002V
  • Manufacturer: LPR
  • EAN number: 8032532092255
  • Condition: New
Show OEM numbers of the product
Details
In stock
30,67 €
Price per item

price incl. 19% VAT

excl. delivery costs

  • Diameter [mm]: 312
  • Brake Disc Type: Vented
  • Supplementary Info: ORIGINAL Quality
  • for PR number: 1ZA, 1ZD
  • Brake Disc Thickness [mm]: 25
  • Fitting Position: Front Axle
  • Height [mm]: 49,9
  • Centering Diameter [mm]: 65
  • Number of Holes: 5
  • Wheel Bolt Bore Diameter [mm]: 15,3
  • Bolt Hole Circle Ø [mm]: 112
  • Minimum thickness [mm]: 22
  • Required quantity: 2
  • Drilled: no
  • Item number: 115 521 1094
  • Manufacturer: MEYLE
  • EAN number: 4040074429006
  • Condition: New
Show OEM numbers of the product
Details
In stock
-21%
compared to RRP 58,78 €

46,22 €
Price per item

price incl. 19% VAT

excl. delivery costs

  • Diameter [mm]: 312
  • Brake Disc Type: Vented
  • Brake Disc Thickness [mm]: 25
  • Fitting Position: Front Axle
  • Height [mm]: 50
  • Centering Diameter [mm]: 65
  • Number of Holes: 5
  • Bolt Hole Circle Ø [mm]: 112
  • Minimum thickness [mm]: 22
  • Drilled: no
  • Item number: BDC5416
  • Manufacturer: QUINTON HAZELL
  • EAN number: 5050438069259
  • Condition: New
Show OEM numbers of the product
Details
Free delivery on this item
In stock
-40%
compared to RRP 120,07 €

71,27 €
Price per item

price incl. 19% VAT

excl. delivery costs

  • Diameter [mm]: 310
  • Brake Disc Type: Vented
  • Brake Disc Thickness [mm]: 22
  • Fitting Position: Rear Axle
  • Height [mm]: 48,4
  • Centering Diameter [mm]: 65
  • Number of Holes: 9
  • Bolt Hole Circle Ø [mm]: 112
  • Minimum thickness [mm]: 20
  • Drilled: no
  • Item number: BDC5628
  • Manufacturer: QUINTON HAZELL
  • EAN number: 5050438159059
  • Condition: New
Show OEM numbers of the product
Details
In stock
-46%
compared to RRP 110,55 €

59,58 €
Price per item

price incl. 19% VAT

excl. delivery costs

  • Diameter [mm]: 272
  • Brake Disc Type: solid
  • Supplementary Info: Original VAICO Quality
  • for PR number: 1KE
  • Brake Disc Thickness [mm]: 9,7
  • Fitting Position: Rear Axle
  • Height [mm]: 48,2
  • Centering Diameter [mm]: 65
  • Rim Hole Number: 5
  • Bolt Hole Circle Ø [mm]: 112
  • Minimum thickness [mm]: 8
  • Brake Disc Hub Height [mm]: 38,2
  • Packaging width [cm]: 28
  • Packaging height [cm]: 10
  • Packaging Depth [cm]: 28
  • Drilled: no
  • Item number: V10-40086
  • Manufacturer: VAICO
  • EAN number: 4046001550584
  • Condition: New
Show OEM numbers of the product
Additional information

In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.

installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.

measurement, including photos.

For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.

When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.

If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

Details
In stock
27,27 €
Price per item

price incl. 19% VAT

excl. delivery costs

    • Fitting Position: Rear Axle
    • for PR number: 1KE, 1KR
    • paired article number: FDB4434
  • Diameter [mm]: 272
  • Brake Disc Type: solid
  • Product line: PREMIER
  • Brake Disc Thickness [mm]: 10
  • Height [mm]: 48
  • Surface: Oiled
  • Centering Diameter [mm]: 65
  • Number of Holes: 9
  • Bolt Hole Circle Ø [mm]: 112
  • Minimum thickness [mm]: 9
  • Weight [kg]: 6,2
  • Tightening Torque [Nm]: 120
  • Test Mark: R90 homologated
  • Supplementary Article / Supplementary Info Info 2: with bolts / screws
  • Packing Type: Box
  • Packaging length [cm]: 27,5
  • Packaging width [cm]: 27,5
  • Packaging height [cm]: 10,5
  • Drilled: no
  • Item number: DDF1895
  • Manufacturer: FERODO
  • EAN number: 4044197541324
  • Condition: New
Show OEM numbers of the product
Details
In stock
-57%
compared to RRP 75,31 €

31,80 €
Price per item

price incl. 19% VAT

excl. delivery costs

    • for PR number: 1ZD
    • Fitting Position: Front Axle
    • for PR number: 1ZA
  • Diameter [mm]: 312
  • Brake Disc Type: Vented
  • Brake Disc Thickness [mm]: 25
  • Height [mm]: 49,9
  • Centering Diameter [mm]: 65
  • Number of Holes: 5
  • Bolt Hole Circle Ø [mm]: 112
  • Minimum thickness [mm]: 22
  • Inner Diameter [mm]: 146
  • Machining: High-carbon
  • No. of holes 2: 9
  • Bore Diameter [mm]: 15,3
  • Drilled: no
  • Item number: 25833
  • Manufacturer: MAPCO
  • EAN number: 4043605415516
  • Condition: New
Show OEM numbers of the product
Details
In stock
-71%
compared to RRP 166,60 €

48,16 €
Price per item

price incl. 19% VAT

excl. delivery costs

  • Diameter [mm]: 312
  • Brake Disc Type: Vented
  • for PR number: 1ZA, 1ZD
  • Brake Disc Thickness [mm]: 25,0
  • Fitting Position: Front Axle
  • Height [mm]: 49,9
  • Surface: Coated
  • Centering Diameter [mm]: 65
  • Number of Holes: 5
  • Bolt Hole Circle Ø [mm]: 112
  • Minimum thickness [mm]: 22
  • Inner Diameter [mm]: 146
  • Machining: High-carbon
  • No. of holes 2: 9
  • Bore Diameter [mm]: 15,3
  • Drilled: no
  • Item number: C3W039ABE
  • Manufacturer: ABE
  • EAN number: 5901655214055
  • Condition: New
Show OEM numbers of the product
Details
Free delivery on this item
In stock
52,37 €
Price per item

price incl. 19% VAT

free delivery

DELPHI BG3953 Brake disc Front Axle, 312x25mm, 5, Vented
Article number: BG3953
Submit a review
    • Fitting Position: Front Axle
    • for PR number: 1ZA, 1ZD
  • Diameter [mm]: 312
  • Brake Disc Type: Vented
  • Brake Disc Thickness [mm]: 25
  • Height [mm]: 49,9
  • Surface: Oiled
  • Centering Diameter [mm]: 65
  • Number of Holes: 5
  • Minimum thickness [mm]: 22
  • Test Mark: E1 90R-02C0277 / 1198
  • Drilled: no
  • Item number: BG3953
  • Manufacturer: DELPHI
  • EAN number: 5012759360545
  • Condition: New
Show OEM numbers of the product
Details
Free delivery on this item
In stock
130,19 €

price incl. 19% VAT

free delivery

DELPHI BG3975 Brake disc Rear Axle, 310x22mm, 5, Vented
Article number: BG3975
Submit a review
    • Fitting Position: Rear Axle
    • for PR number: 1KY
  • Diameter [mm]: 310
  • Brake Disc Type: Vented
  • Brake Disc Thickness [mm]: 22
  • Height [mm]: 48,5
  • Surface: Oiled
  • Centering Diameter [mm]: 65
  • Number of Holes: 5
  • Minimum thickness [mm]: 20
  • Test Mark: E1 90R-02C0289 / 1665
  • Drilled: no
  • Item number: BG3975
  • Manufacturer: DELPHI
  • EAN number: 5012759370155
  • Condition: New
Show OEM numbers of the product
Details
Free delivery on this item
In stock (Item(s) left: 5)
-36%
compared to RRP 99,36 €

62,70 €
Price per item

price incl. 19% VAT

excl. delivery costs

    • Fitting Position: Rear Axle
    • for PR number: 1KE
  • Diameter [mm]: 272
  • Brake Disc Type: solid
  • Brake Disc Thickness [mm]: 10
  • Height [mm]: 48,3
  • Surface: Oiled
  • Centering Diameter [mm]: 65
  • Number of Holes: 9
  • Bolt Hole Circle Ø [mm]: 112
  • Minimum thickness [mm]: 8
  • fulfils ECE norm: ECE-R90
  • Bore Diameter up to [mm]: 15,3
  • Drilled: no
  • Item number: 0 986 479 677
  • Manufacturer: BOSCH
  • EAN number: 4047024749801
  • Condition: New
Show OEM numbers of the product
Details
In stock
-62%
compared to RRP 79,85 €

29,82 €
Price per item

price incl. 19% VAT

excl. delivery costs

  • Diameter [mm]: 288
  • Brake Disc Type: Vented
  • Brake Disc Thickness [mm]: 25
  • Fitting Position: Front Axle
  • Height [mm]: 50
  • Centering Diameter [mm]: 65
  • Number of Holes: 5
  • Bolt Hole Circle Ø [mm]: 112
  • Minimum thickness [mm]: 22
  • Drilled: no
  • Item number: BDC5418
  • Manufacturer: QUINTON HAZELL
  • EAN number: 5016593840775
  • Condition: New
Show OEM numbers of the product
Details
In stock
-42%
compared to RRP 94,37 €

53,80 €
Price per item

price incl. 19% VAT

excl. delivery costs

    • for PR number: 1KJ, 1KY, 1KZ
    • Vehicle Equipment: for vehicles with electric parking brake
    • Fitting Position: Rear Axle
  • Diameter [mm]: 310,0
  • Brake Disc Type: Vented
  • Brake Disc Thickness [mm]: 22,0
  • Height [mm]: 48,5
  • Surface: Coated
  • Centering Diameter [mm]: 65,0
  • Number of Holes: 5
  • Bolt Hole Circle Ø [mm]: 112,0
  • Minimum thickness [mm]: 20,0
  • Inner Diameter [mm]: 169,0
  • Machining: High-carbon
  • MAPP code available
  • No. of holes 2: 9
  • Test Mark: E1 90R-02C0118 / 0945
  • Bore Diameter [mm]: 15,3
  • Drilled: no
  • Item number: 24.0122-0219.1
  • Manufacturer: ATE
  • EAN number: 4006633229630
  • Condition: New
Show OEM numbers of the product
Details
Free delivery on this item
In stock
-52%
compared to RRP 143,28 €

68,05 €
Price per item

price incl. 19% VAT

excl. delivery costs

    • for PR number: 1ZE, 1ZP
    • Fitting Position: Front Axle
  • Diameter [mm]: 288
  • Brake Disc Type: Vented
  • Brake Disc Thickness [mm]: 25,0
  • Height [mm]: 49,9
  • Surface: Coated
  • Centering Diameter [mm]: 65,0
  • Number of Holes: 5
  • Bolt Hole Circle Ø [mm]: 112,0
  • Minimum thickness [mm]: 22,0
  • Inner Diameter [mm]: 144,0
  • Machining: High-carbon
  • MAPP code available
  • No. of holes 2: 9
  • Test Mark: E1 90R-02C0115 / 0010
  • Bore Diameter [mm]: 15,3
  • Supplementary Article / Supplementary Info Info 2: with bolts / screws
  • Drilled: no
  • Item number: 24.0125-0145.1
  • Manufacturer: ATE
  • EAN number: 4006633113472
  • Condition: New
Show OEM numbers of the product
Details
In stock
-55%
compared to RRP 126,62 €

56,07 €
Price per item

price incl. 19% VAT

excl. delivery costs

    • for PR number: 1ZA, 1ZD
    • Fitting Position: Front Axle
  • Diameter [mm]: 312,0
  • Brake Disc Type: Vented
  • Brake Disc Thickness [mm]: 25,0
  • Height [mm]: 49,9
  • Surface: Coated
  • Centering Diameter [mm]: 65,0
  • Number of Holes: 5
  • Bolt Hole Circle Ø [mm]: 112,0
  • Minimum thickness [mm]: 22,0
  • Inner Diameter [mm]: 146,0
  • Machining: High-carbon
  • MAPP code available
  • No. of holes 2: 9
  • Test Mark: E1 90R-02C0115 / 1001
  • Bore Diameter [mm]: 15,3
  • Supplementary Article / Supplementary Info Info 2: with bolts / screws
  • Drilled: no
  • Item number: 24.0125-0158.1
  • Manufacturer: ATE
  • EAN number: 4006633209489
  • Condition: New
Show OEM numbers of the product
Details
Free delivery on this item
In stock
-56%
compared to RRP 156,13 €

68,27 €
Price per item

price incl. 19% VAT

excl. delivery costs

Find the best offers on