AUDI A3 8v 1.4 TFSI Abs ring (122 hp Petrol CXSA)
- Fitting Position: Rear Axle Left, Rear Axle Right
- Inner Diameter [mm]: 72
- Width [mm]: 7
- Number of Teeth: 86
- Diameter [mm]: 78
- Item number: 59122
- Manufacturer: AIC
- EAN number: 4046283591220
- Condition: New
Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use.
For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules.
If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at:
Phone: 040 - 25 30 66 55 Email: [email protected]
This often avoids extensive troubleshooting that is disproportionate to normal repair times.
The following applies to complaints: The more complete the processes are submitted, the faster they can be processed.
Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Fitting Position: Rear Axle both sides
- Inner Diameter [mm]: 71,95
- Width [mm]: 7
- Supplementary Article / Supplementary Info Info 2: with integrated magnetic sensor ring
- for article number: 8530 29229
- Number of pins: 86
- Diameter [mm]: 78,2
- Item number: 8540 29412
- Manufacturer: TRISCAN
- EAN number: 5710476274182
- Condition: New
- Fitting Position: Rear Axle both sides
- Width [mm]: 7
- Supplementary Article / Supplementary Info Info 2: with integrated magnetic sensor ring
- Inner Diameter [mm]: 72
- Number of pins: 86
- for article number: 8530 29229
- Diameter [mm]: 78
- Item number: 27-0713
- Manufacturer: MAXGEAR
- EAN number: 5903364316754
- Condition: New
- Inner Diameter [mm]: 71,95
- Width [mm]: 7
- Fitting Position: Rear Axle both sides
- Number of Teeth, ABS ring: 86
- Supplementary Info: Original VEMO Quality
- Diameter [mm]: 78,2
- Item number: V10-92-1503
- Manufacturer: VEMO
- EAN number: 4046001957161
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Rear Axle both sides
- Supplementary Article / Supplementary Info Info 2: with integrated magnetic sensor ring
- Number of pins: 86
- Width [mm]: 7
- Inner Diameter [mm]: 72
- for article number: 8530 29229
- Diameter [mm]: 78
- Item number: 8540 29412
- Manufacturer: KAWE
- EAN number: 5710476274182
- Condition: New
-
- Fitting Position: Rear Axle
- for PR number: 1KE, 1KR
- paired article number: FDB4434
- Diameter [mm]: 272
- Brake Disc Type: solid
- Product line: PREMIER
- Brake Disc Thickness [mm]: 10
- Height [mm]: 48
- Surface: Oiled
- Centering Diameter [mm]: 65
- Number of Holes: 9
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 9
- Weight [kg]: 6,2
- Tightening Torque [Nm]: 120
- Test Mark: R90 homologated
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Packing Type: Box
- Packaging length [cm]: 27,5
- Packaging width [cm]: 27,5
- Packaging height [cm]: 10,5
- Drilled: no
- Item number: DDF1895
- Manufacturer: FERODO
- EAN number: 4044197541324
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle
- for PR number: 1ZA
- Diameter [mm]: 312
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 25
- Height [mm]: 49,9
- Surface: Oiled
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 22
- Test Mark: E1 90R-02C0277 / 1198
- Drilled: no
- Item number: BG3953
- Manufacturer: DELPHI
- EAN number: 5012759360545
- Condition: New
-
- Fitting Position: Rear Axle
- for PR number: 1KY, 1KJ
- Diameter [mm]: 310
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22
- Height [mm]: 48,5
- Surface: Oiled
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 20
- Test Mark: E1 90R-02C0289 / 1665
- Drilled: no
- Item number: BG3975
- Manufacturer: DELPHI
- EAN number: 5012759370155
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle
- for PR number: 1ZE, 1ZP
- Diameter [mm]: 288
- Brake Disc Type: internally vented
- Brake Disc Thickness [mm]: 25
- Height [mm]: 49,5
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 22
- Drilled: no
- Item number: A1002V
- Manufacturer: LPR
- EAN number: 8032532092255
- Condition: New
-
- Construction Year from: 08 / 2012
- Fitting Position: Rear Axle
- for PR number: 1KJ, 1KY
- Diameter [mm]: 310
- Brake Disc Type: internally vented
- Brake System: ATE
- Brake Disc Thickness [mm]: 22
- Height [mm]: 48,4
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 20
- Drilled: no
- Item number: A1014V
- Manufacturer: LPR
- EAN number: 8032928002936
- Condition: New
price incl. 19% VAT
- Diameter [mm]: 312
- Brake Disc Type: Vented
- Supplementary Info: ORIGINAL Quality
- for PR number: 1ZA
- Brake Disc Thickness [mm]: 25
- Fitting Position: Front Axle
- Height [mm]: 49,9
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Wheel Bolt Bore Diameter [mm]: 15,3
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 22
- Required quantity: 2
- Drilled: no
- Item number: 115 521 1094
- Manufacturer: MEYLE
- EAN number: 4040074429006
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Rear Axle
- for PR number: 1KE
- Diameter [mm]: 272
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 10
- Height [mm]: 48,3
- Surface: Oiled
- Centering Diameter [mm]: 65
- Number of Holes: 9
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 8
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 15,3
- Drilled: no
- Item number: 0 986 479 677
- Manufacturer: BOSCH
- EAN number: 4047024749801
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 288
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 25
- Fitting Position: Front Axle
- Height [mm]: 50
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 22
- Drilled: no
- Item number: BDC5418
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593840775
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle
- for PR number: 1ZA
- Diameter [mm]: 312
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 25
- Height [mm]: 49,9
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 22
- Inner Diameter [mm]: 146
- Machining: High-carbon
- No. of holes 2: 9
- Bore Diameter [mm]: 15,3
- Drilled: no
- Item number: 25833
- Manufacturer: MAPCO
- EAN number: 4043605415516
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 310
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22
- Height [mm]: 48,5
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 20
- Inner Diameter [mm]: 169
- Bore Diameter [mm]: 15,3
- Drilled: no
- Item number: 25842
- Manufacturer: MAPCO
- EAN number: 4043605445797
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 312
- Brake Disc Type: Vented
- for PR number: 1ZA, IZA
- Brake Disc Thickness [mm]: 25,0
- Fitting Position: Front Axle
- Height [mm]: 49,9
- Surface: Coated
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 22
- Inner Diameter [mm]: 146
- Machining: High-carbon
- No. of holes 2: 9
- Bore Diameter [mm]: 15,3
- Drilled: no
- Item number: C3W039ABE
- Manufacturer: ABE
- EAN number: 5901655214055
- Condition: New
-
- Construction Year from: 08 / 2012
- Fitting Position: Front Axle
- for PR number: 1ZA, 1ZD
- Diameter [mm]: 312
- Brake Disc Type: internally vented
- Brake Disc Thickness [mm]: 25
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 22
- for article number: A1004V
- Drilled: no
- Item number: A1004V
- Manufacturer: LPR
- EAN number: 8032532102671
- Condition: New
- Diameter [mm]: 312
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 25
- Fitting Position: Front Axle
- Height [mm]: 50
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 22
- Drilled: no
- Item number: BDC5416
- Manufacturer: QUINTON HAZELL
- EAN number: 5050438069259
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 310
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22
- Fitting Position: Rear Axle
- Height [mm]: 48,4
- Centering Diameter [mm]: 65
- Number of Holes: 9
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 20
- Drilled: no
- Item number: BDC5628
- Manufacturer: QUINTON HAZELL
- EAN number: 5050438159059
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- for PR number: 1KE
- Vehicle Equipment: for vehicles with electric parking brake
- Diameter [mm]: 272
- Brake Disc Type: solid
- Supplementary Info: Original VAICO Quality
- Brake Disc Thickness [mm]: 9,7
- Fitting Position: Rear Axle
- Height [mm]: 48,2
- Centering Diameter [mm]: 65
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 8
- Brake Disc Hub Height [mm]: 38,2
- Packaging width [cm]: 28
- Packaging height [cm]: 10
- Packaging Depth [cm]: 28
- Drilled: no
- Item number: V10-40086
- Manufacturer: VAICO
- EAN number: 4046001550584
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.