Toyota Hilux Mk8 2.0 Wheel spacers (137 hp Petrol 1TR-FE)

One packaging unit contains two Pro-Spacers. Pro-Spacer-Systems 4,5,6,7 and 8 include all necessary mounting parts (bolts, nuts).

8.) If the depth of the spacer is smaller than the length DRM = The wheel spacer should be attached to the axial hub Please note additional information and vehicle-specific of technical notes! using the fastening nuts provided. The wheels should then be fitted using the existing wheel nuts provided with the the standard studs, the employed wheels must show gaps in the contact-surface. If using wheels without gaps the wheels. All fixing-accessories are included! standard studs should be shortened so far that a complete contact of the wheel to the contact-surface is guaranteed.

8.) If the depth of the spacer is smaller than the length DRM = The wheel spacer should be attached to the axial hub Please note additional information and vehicle-specific of technical notes! using the fastening nuts provided. The wheels should then be fitted using the existing wheel nuts provided with the the standard studs, the employed wheels must show gaps in the contact-surface. If using wheels without gaps the wheels. All fixing-accessories are included! standard studs should be shortened so far that a complete contact of the wheel to the contact-surface is guaranteed.

One packaging unit contains two Pro-Spacers. Pro-Spacer-Systems 4,5,6,7 and 8 include all necessary mounting parts (bolts, nuts).

One packaging unit contains two Pro-Spacers. Pro-Spacer-Systems 4,5,6,7 and 8 include all necessary mounting parts (bolts, nuts).

8.) If the depth of the spacer is smaller than the length DRM = The wheel spacer should be attached to the axial hub Please note additional information and vehicle-specific of technical notes! using the fastening nuts provided. The wheels should then be fitted using the existing wheel nuts provided with the the standard studs, the employed wheels must show gaps in the contact-surface. If using wheels without gaps the wheels. All fixing-accessories are included! standard studs should be shortened so far that a complete contact of the wheel to the contact-surface is guaranteed.

One packaging unit contains two Pro-Spacers. Pro-Spacer-Systems 4,5,6,7 and 8 include all necessary mounting parts (bolts, nuts).

31.) Wheel spacers with ABE are only useable for the 36.) The set contains: 2 spacers with pressed-in stud bolts 8.) If the depth of the spacer is smaller than the length DRM = The wheel spacer should be attached to the axial hub Please note additional information and vehicle-specific and nuts. of original wheels shown in the ABE which is enclosed in the technical notes! using the fastening nuts provided. The wheels should then be fitted using the existing wheel nuts provided with the delivery. For special wheel/tyre combinations an additional the standard studs, the employed wheels must show gaps in the contact-surface. If using wheels without gaps the TÜV inspection is necessary. ABE are just valid in Germany. wheels. All fixing-accessories are included! Included in the delivery of the ABE spacers is the entire standard studs should be shortened so far that a complete contact of the wheel to the contact-surface is guaranteed. fastening material.

31.) Wheel spacers with ABE are only useable for the 36.) The set contains: 2 spacers with pressed-in stud bolts 8.) If the depth of the spacer is smaller than the length DRM = The wheel spacer should be attached to the axial hub Please note additional information and vehicle-specific and nuts. of original wheels shown in the ABE which is enclosed in the technical notes! using the fastening nuts provided. The wheels should then be fitted using the existing wheel nuts provided with the delivery. For special wheel/tyre combinations an additional the standard studs, the employed wheels must show gaps in the contact-surface. If using wheels without gaps the TÜV inspection is necessary. ABE are just valid in Germany. wheels. All fixing-accessories are included! Included in the delivery of the ABE spacers is the entire standard studs should be shortened so far that a complete contact of the wheel to the contact-surface is guaranteed. fastening material.

31.) Wheel spacers with ABE are only useable for the 36.) The set contains: 2 spacers with pressed-in stud bolts 8.) If the depth of the spacer is smaller than the length DRM = The wheel spacer should be attached to the axial hub Please note additional information and vehicle-specific and nuts. of original wheels shown in the ABE which is enclosed in the technical notes! using the fastening nuts provided. The wheels should then be fitted using the existing wheel nuts provided with the delivery. For special wheel/tyre combinations an additional the standard studs, the employed wheels must show gaps in the contact-surface. If using wheels without gaps the TÜV inspection is necessary. ABE are just valid in Germany. wheels. All fixing-accessories are included! Included in the delivery of the ABE spacers is the entire standard studs should be shortened so far that a complete contact of the wheel to the contact-surface is guaranteed. fastening material.