Vehicle identification number: 0603493
Golf 4 2.0 BiFuel Strut mount and bearing (116 hp Petrol/Compressed Natural Gas (CNG) BEH)
- Fitting Position: Front axle both sides
- Vehicle configuration line / variant: HEAVY DUTY SUSP.
- Inner Diameter [mm]: 26,5
- Diameter: 96,7
- Height [mm]: 50
- Item number: 1180S0124
- Manufacturer: RIDEX
- EAN number: 4059191188383
- Condition: New
- Fitting Position: Front axle both sides
- Material: Elastomer
- Supplementary Article / Supplementary Info Info 2: without bearing
- Inner Diameter [mm]: 26,0
- Diameter: 83,0
- Weight [kg]: 0,237
- Thickness [mm]: 54,0
- Item number: 1180S0095
- Manufacturer: RIDEX
- EAN number: 4059191188109
- Condition: New
- Fitting Position: Front axle both sides
- Inner Diameter [mm]: 26,5
- Diameter: 96,7
- Height [mm]: 50
- Item number: 1180S0899
- Manufacturer: RIDEX
- EAN number: 4066016946936
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
-
- Suspension: for vehicles with comfort suspension, for vehicles with bad road version
- for PR number: 1JD
-
- Suspension: for vehicles with comfort suspension, for vehicles with bad road version
- for PR number: 1JB
-
- Suspension: for vehicles with comfort suspension, for vehicles with bad road version
- for PR number: 1JA
- Material: Aluminium
- Supplementary Article / Supplementary Info Info 2: without ball bearing
- Inner Diameter [mm]: 11
- Mounting Type: Rubber-Metal Mount
- Observe service information
- Hole Spacing [mm]: 102
- Item number: 10819
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816108191
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
-
- Suspension: for vehicles with comfort suspension, for vehicles with bad road version
- for PR number: 1JD
-
- Suspension: for vehicles with comfort suspension, for vehicles with bad road version
- for PR number: 1JB
-
- Suspension: for vehicles with comfort suspension, for vehicles with bad road version
- for PR number: 1JA
- Material: Aluminium
- Supplementary Article / Supplementary Info Info 2: without ball bearing
- Inner Diameter [mm]: 11
- Mounting Type: Rubber-Metal Mount
- Hole Spacing [mm]: 102
- Item number: 30 54 0024
- Manufacturer: SWAG
- EAN number: 4044688108197
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Supplementary Article / Supplementary Info Info 2: without bearing
- Weight [kg]: 0,300
- Packaging length [cm]: 13,6
- Packaging width [cm]: 11,8
- Packaging height [cm]: 11,4
- Item number: MK118
- Manufacturer: MONROE
- EAN number: 5412096086533
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle Left, Front Axle Right, Front axle both sides
- for OE number: 1J0 412 331 B
- Item number: 510070
- Manufacturer: GSP
- EAN number: 2237398496480
- Condition: New
- Fitting Position: Front Axle Right, Front Axle Left
- Supplementary Article / Supplementary Info Info 2: without bearing
- Weight [kg]: 0,26
- Item number: 63-02160
- Manufacturer: TALOSA
- EAN number: 8435229588305
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Material: Elastomer
- Supplementary Article / Supplementary Info Info 2: without ball bearing
- Inner Diameter [mm]: 26
- Diameter: 83
- Required quantity: 2
- Weight [kg]: 0,237
- Thickness [mm]: 54
- Item number: 44120023501
- Manufacturer: VIKA
- EAN number: 224346131569081315690
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle Left, Front Axle Right
- Material: Elastomer
- Supplementary Article / Supplementary Info Info 2: without ball bearing
- Inner Diameter [mm]: 26
- Diameter: 83
- Height [mm]: 54
- for OE number: 1J0 412 331 C
- Observe service information
- Item number: 09227
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816092278
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Supplementary Info: Original VAICO Quality
- Supplementary Article / Supplementary Info Info 2: without rolling bearing
- Diameter: 85
- Weight [kg]: 0,2717
- Height [mm]: 53
- Packaging width [cm]: 7,2
- Packaging height [cm]: 8,1
- Packaging Depth [cm]: 8,8
- Item number: V10-1001
- Manufacturer: VAICO
- EAN number: 4046001147364
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Material: Elastomer
- Supplementary Article / Supplementary Info Info 2: without ball bearing
- Inner Diameter [mm]: 26
- Diameter: 83
- Required quantity: 2
- Weight [kg]: 0,237
- Thickness [mm]: 54
- Item number: 44120025901
- Manufacturer: VIKA
- EAN number: 224346131569161315691
- Condition: New
- Fitting Position: Front Axle
- Material: Elastomer
- Supplementary Article / Supplementary Info Info 2: without ball bearing
- Inner Diameter [mm]: 26
- Diameter: 83
- Required quantity: 2
- Weight [kg]: 0,237
- Thickness [mm]: 54
- Item number: B16172
- Manufacturer: Borsehung
- EAN number: 224815107057501070575
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle Left, Front Axle Right
- Material: Elastomer
- Supplementary Article / Supplementary Info Info 2: without ball bearing, without bearing
- Inner Diameter [mm]: 26
- Diameter: 83
- Height [mm]: 54
- Item number: 30 54 0012
- Manufacturer: SWAG
- EAN number: 4044688092274
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Inner Diameter [mm]: 26
- Diameter: 82
- Height [mm]: 53
- Item number: 863402
- Manufacturer: SIDEM
- EAN number: 5413978256730
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Inner Diameter [mm]: 26,5
- Diameter: 96,7
- Suspension: for vehicles with heavy duty suspension
- Height [mm]: 50
- Item number: 413050
- Manufacturer: SPIDAN CHASSIS PARTS
- EAN number: 5413978880652
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Inner Diameter [mm]: 26,5
- Diameter: 96,7
- Suspension: for vehicles with heavy duty suspension
- Height [mm]: 50
- Item number: 863404
- Manufacturer: SIDEM
- EAN number: 5413978256556
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Inner Diameter [mm]: 26
- Diameter: 82
- Height [mm]: 53
- Item number: 413048
- Manufacturer: SPIDAN CHASSIS PARTS
- EAN number: 5413978880638
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Weight [g]: 280
- Item number: B12237
- Manufacturer: Borsehung
- EAN number: 4251475101969
- Condition: New
- Fitting Position: Rear Axle
- Supplementary Article / Supplementary Info Info 2: without ball bearing, with fastening material
- for OE number: 1J0 513 353 B S1
- Supplementary Article / Supplementary Info: with fastening / mounting material
- Item number: 37879
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816378792
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- 1
- 2
- 3
- 4
- 5