Audi A4 B6 Avant 3.0 quattro Suspension arm (218 hp Petrol BBJ)
- Fitting Position: Upper Front Axle, Right Front
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Length [mm]: 273
- Paired product: JTC421
- Inner Diameter [mm]: 10
- Diameter 1 [mm]: 46,4
- Diameter 2 [mm]: 40
- Item number: JTC119
- Manufacturer: TRW
- EAN number: 3322937908646
- Condition: New
- Fitting Position: Upper, Front Axle Left, Front
-
- Suspension: for vehicles with sports suspension
- for PR number: 1BV
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Paired product: 40746
- Supplementary Article / Supplementary Info Info 2: with ball joint, with bearing(s)
- Weight [kg]: 0,914
- Supplementary Article / Supplementary Info: with fastening / mounting material
- Observe service information
- Item number: 40745
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816407454
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle Right, Upper
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Paired product: 173741
- Weight [kg]: 1,470
- Observe service information
- Item number: 173740
- Manufacturer: FEBI BILSTEIN
- EAN number: 4054224737408
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Upper Front Axle, Left Front
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Length [mm]: 273
- Paired product: JTC119
- Inner Diameter [mm]: 10
- Diameter 1 [mm]: 46,4
- Diameter 2 [mm]: 40
- Item number: JTC421
- Manufacturer: TRW
- EAN number: 3322937904808
- Condition: New
- Fitting Position: Front Axle Left, Upper, Rear
- Vehicle configuration line / variant: 1BV
- Control / Trailing Arm Type: Control Arm
- Length [mm]: 248,5
- Paired product: VKDS 321033 B
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Supplementary Article / Supplementary Info: with synthetic grease
- Bore Diameter [mm]: 10,2
- Item number: VKDS 321032 B
- Manufacturer: SKF
- EAN number: 7316577893536
- Condition: New
- Fitting Position: Front Axle Right, Upper, Front
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Paired product: 37179
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Weight [kg]: 0,664
- Supplementary Article / Supplementary Info: with fastening / mounting material
- not for PR number: 1BV
- Observe service information
- new version
- Item number: 37178
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816371786
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
- Fitting Position: Upper Front Axle, Right Rear
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Cone Size [mm]: 16
- Overall Length [mm]: 299,6
- Paired product: JTC345
- Item number: JTC347
- Manufacturer: TRW
- EAN number: 3322937904464
- Condition: New
- Fitting Position: Upper, Front Axle Right, Front
-
- Suspension: for vehicles with sports suspension
- for PR number: 1BV
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Paired product: 40745
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Weight [kg]: 0,974
- Supplementary Article / Supplementary Info: with fastening / mounting material
- Observe service information
- Item number: 40746
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816407461
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle Left, Rear Axle Right
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Weight [kg]: 1,12
- Observe service information
- Item number: 38774
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816387749
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Control / Trailing Arm Type: Control Arm
- Material: Steel
- Supplementary Info: Original VAICO Quality
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 10
- Packaging height [cm]: 7
- Packaging Depth [cm]: 41
- Item number: V10-7167
- Manufacturer: VAICO
- EAN number: 4046001271618
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: both sides, Upper, in front of axle, Rear Axle, Left, Right
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Length [mm]: 418
- Height [mm]: 50
- Supplementary Article / Supplementary Info Info 2: without ball joint
- Width [mm]: 76
- Item number: TC3195
- Manufacturer: DELPHI
- EAN number: 5012759962718
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle, Upper, Left, Front
-
- Suspension: for vehicles with sports suspension
- Vehicle configuration line / variant: S Line
- for PR number: 1BV
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Length [mm]: 273
- Supplementary Article / Supplementary Info Info 2: with rubber mount
- Item number: 273C1763
- Manufacturer: RIDEX
- EAN number: 4064138348379
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle Left, Upper, Front
-
- Suspension: for vehicles with sports suspension
- for PR number: 1BV
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Paired product: 32319
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Weight [kg]: 0,50
- Observe service information
- Item number: 32318
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816323181
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
- Fitting Position: Rear, Lower Front Axle, Left
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Supplementary Info: Original VAICO Quality
- Overall Length [mm]: 450
- Paired product: V10-7010-1
- Thread Size: M12x1,5
- Supplementary Article / Supplementary Info Info 2: with bearing(s)
- Weight [kg]: 2,054
- for OE number: 8E0 407 693 AG
- Width [mm]: 125,0
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 14
- Packaging height [cm]: 10,5
- Packaging Depth [cm]: 50
- Item number: V10-7011-1
- Manufacturer: VAICO
- EAN number: 4046001288623
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Front Axle Right, Rear, Upper
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Supplementary Info: Quality
- Length [mm]: 248
- Paired product: 116 050 8292 / HD
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Required quantity: 1
- Supplementary Article / Supplementary Info: with accessories
- Replace in pairs only
- Item number: 116 050 8293/HD
- Manufacturer: MEYLE
- EAN number: 4040074074152
- Condition: New
'Improved design for longer service life: MEYLE-HD parts 4-year warranty on all MEYLE-HD parts. With mounting materials, to fit most models. Please check deliver enhanced durability. Compared to OE, MEYLE-HD is Engineered and quality approved in Germany. fit accuracy before installation. technically improved with reinforced inner parts, using higher quality materials or optimized design solution.
- Fitting Position: Front Axle Left, Front, Upper
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Supplementary Info: Quality
- Length [mm]: 273
- Paired product: 116 050 8298 / HD
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Required quantity: 1
- Supplementary Article / Supplementary Info: with accessories
- reinforced version
- Replace in pairs only
- Item number: 116 050 8297/HD
- Manufacturer: MEYLE
- EAN number: 4040074374979
- Condition: New
'Improved design for longer service life: MEYLE-HD parts 4-year warranty on all MEYLE-HD parts. With mounting materials, to fit most models. Please check deliver enhanced durability. Compared to OE, MEYLE-HD is Engineered and quality approved in Germany. fit accuracy before installation. technically improved with reinforced inner parts, using higher quality materials or optimized design solution.
- Fitting Position: both sides, Rear Axle
- Control / Trailing Arm Type: Control Arm
- Material: Steel
- Length [mm]: 321
- Item number: 273C0449
- Manufacturer: RIDEX
- EAN number: 4059191208517
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear, Right, Lower Front Axle
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Supplementary Info: Original VAICO Quality
- Paired product: V10-7011-1
- Supplementary Article / Supplementary Info Info 2: with bearing(s)
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 14
- Packaging height [cm]: 10,5
- Packaging Depth [cm]: 50
- Item number: V10-7010-1
- Manufacturer: VAICO
- EAN number: 4046001288616
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Front Axle Left, Upper, Rear
-
- Suspension: for vehicles with sports suspension
- for PR number: 1BV
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Paired product: 31331
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Weight [kg]: 0,47
- Observe service information
- Item number: 31332
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816313328
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle Right, Front, Upper
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Supplementary Info: Quality
- Length [mm]: 273
- Paired product: 116 050 8297 / HD
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Required quantity: 1
- Supplementary Article / Supplementary Info: with accessories
- reinforced version
- Replace in pairs only
- Item number: 116 050 8298/HD
- Manufacturer: MEYLE
- EAN number: 4040074374986
- Condition: New
'Improved design for longer service life: MEYLE-HD parts 4-year warranty on all MEYLE-HD parts. With mounting materials, to fit most models. Please check deliver enhanced durability. Compared to OE, MEYLE-HD is Engineered and quality approved in Germany. fit accuracy before installation. technically improved with reinforced inner parts, using higher quality materials or optimized design solution.
- 1
- 2
- 3
- 4
- 5