VW Jetta 2 1.8 Sport suspension (84 hp Petrol RH)

Please note additional information and vehicle-specific technical notes!

Please note additional information and vehicle-specific technical notes!

22.) Cup-Kit shock absorbers: Use OE bump-stop, spring-cup Please note additional information and vehicle-specific Vehicles fitted with BMW M-Technic, MB-Sportsline, Audi and Sportsuspension etc. will show less lowering as they are technical notes! already factory lowered. dust cover if not co-packed. Check good condition of these items prior to fitment, exchange if in doubt.

"The minimum clearance between tires and suspension/body 13.) With standard wheel/tyre combination and some For all cars with 4-hole wheel. Lowering beyond the dimensions given in the type approval Please note additional information and vehicle-specific aluminium may result in damage. These damages are not covered by H&R. parts is 5 mm. If the clearance is less than 5 mm, it has technical notes! to be restored with wheel spacers or reworking wheels wheel spacers are required. thebodywork. This bodywork and/or arising costs are not covered by H&R."

13.) With standard wheel/tyre combination and some Please note additional information and vehicle-specific aluminium technical notes! wheels wheel spacers are required.

13.) With standard wheel/tyre combination and some Damping force ajustable Please note additional information and vehicle-specific aluminium technical notes! wheels wheel spacers are required.

Front: for original struts only Front: for original struts Ø 55 mm only / Rear: only for car Rear: Lmax = 480mm s with torsion-beam rear suspension. Excl: HD Suspension and DCC

Front: for original struts only Front: for original struts Ø 55 mm only / Rear: only for car Rear: Lmax = 480mm s with torsion-beam rear suspension. Excl: HD Suspension and DCC

Set (VA+HA)

Set (VA+HA)

Front: for original struts only Front: for original struts Ø 55 mm only / Rear: only for car Front: OE struts only Rear: Lmax = 480mm s with torsion-beam rear suspension. Excl: HD Suspension and DCC

Set VA + HA Gewindefederbeine Shock absorber without hardness adjustment ST Gewindefahrwerke ST X Die ST X Gewindefahrwerke erlauben durch die stufenlose Gewindeverstellung eine moderate bis eXtreme Tieferlegung. Basierend auf dem Knowhow von KW, dem Marktführer für individuelle Fahrwerklösungen, überzeugen die ST X Gewindefahrwerke durch ihre Qualität und Fahrdynamik.- Individuelle Tieferlegung innerhalb des TÜV-geprüften Verstellbereichs- VA und HA (sofern technisch möglich) mit Gewindeverstellung- Verzinkte Gewindefederbeine mit zusätzlicher Versiegelung für einen optimierten Korrosionsschutz Komplette Lösung mit Verstellfederteller, Rennsportfedersystem und Anschlagelementen mit Staubschutzsystem Leistungsfähiger 2-Rohr Dämpfer mit hochwertigen Komponenten für eine lange Lebensdauer

Set VA + HA Gewindefederbeine Shock absorber with stiffness adjustment

"The minimum clearance between tires and suspension/body 13.) With standard wheel/tyre combination and some 33.) Please note before purchase: This suspension is a very In case of plus suspension please note when ordering . Lowering beyond the dimensions given in the type approval Please note additional information and vehicle-specific aluminium low may result in damage. These damages are not covered by H&R. parts is 5 mm. If the clearance is less than 5 mm, it has technical notes! to be restored with wheel spacers or reworking version! Customer and/or workshop is responsible for wheels wheel spacers are required. clearance, necessary work thebodywork. This bodywork and/or arising costs are not and/or additional other modifications/changes. covered by H&R." This rework and/or arising cost is not covered by H&R.

Front: for original struts only Front: for original struts Ø 55 mm only / Rear: only for car Rear: Lmax = 480mm s with torsion-beam rear suspension. Excl: HD Suspension and DCC

"The minimum clearance between tires and suspension/body 13.) With standard wheel/tyre combination and some 33.) Please note before purchase: This suspension is a very In case of plus suspension please note when ordering . Lowering beyond the dimensions given in the type approval Please note additional information and vehicle-specific aluminium low may result in damage. These damages are not covered by H&R. parts is 5 mm. If the clearance is less than 5 mm, it has technical notes! to be restored with wheel spacers or reworking version! Customer and/or workshop is responsible for wheels wheel spacers are required. clearance, necessary work thebodywork. This bodywork and/or arising costs are not and/or additional other modifications/changes. covered by H&R." This rework and/or arising cost is not covered by H&R.