Fiat Idea 350 1.6 D Multijet Diesel particulate filter (120 hp Diesel 350 A2.000)

Highly effective fluid for cleaning clogged passenger car diesel particulate filters when installed. Dissolves hardened, dense and encrusted contaminants on the surface of diesel particulate filters. Secures optimum vehicle handling, engine performance and low fuel consumption. Regular cleaning in combination with flushing can help avoid expensive repairs.

Highly effective, solvent-free additive combination. Dissolves dirt and cleans diesel particulate filters when dismantled. Thus relieving you of the usual filter change, which in turn reduces operating costs.

Specially developed probe with 5 different moving tips made from stainless steel for processing Pro-Line Diesel Particulate Filter Cleaner and Pro-Line Diesel Particulate Filter Purge. The probe has a flexible hose connection with a length of 1 m and push-on nipples that fit the DPF pressurized tank spray gun (part no. 7946).

With Catalytic Converter

With Catalytic Converter

With Catalytic Converter

Highly efficient additive combination for cleaning of dismantled diesel particulate filters (DPF). Dissolves contamination in the DPF and regenerates its full functionality. Application: suitable for all DPF types. 1. Application ratio 1:4 with water (in case of strong contamination use 1:1 ratio). 2. Demount the DPF and fill in the cleaning liquid - approx. 3 to 5 litres (depending on the filter size). 3. Let the product take effect for approx. 8 to 10 hours. 4. Check filling level regularly and refill if necessary. 5. Empty particulate filter. 6. Thoroughly rinse the filter with clear water after the cleaning process. 7. Reassemble the diesel particulate filter and do a test drive for at least 15 min.

Highly efficient cleaning fluid for cleaning DPF. Dissolves contaminations in the diesel particulate filter and regenerates its full functionality. Application: Make sure that the exhaust system has no leaks and is working properly. 1. Dismantle the temperature and/or pressure sensors. 2. Dilute the fluid with water at a ratio of 1:3 (for heavy contamination use 1:2). 3. Fill the fluid into the air pressure pistol, apply air pressure (2.5 – 4.0 bar) and adjust pressure at the device. 4. Turn on the engine and let the idle during the cleaning. 5. Reassemble the sensors and carry out a test drive. The soot particles that have been dissolved during the cleaning process will be burnt during the regular regeneration process.