Audi 100 C4 2.6 Wiper motor (150 hp Petrol ABC)
- Fitting Position: Front
- Voltage [V]: 12
- Item number: 53698
- Our price: 107,60 €
- Manufacturer: AIC
- EAN number: 4046283536986
- Condition: New
Before mounting the wiper arm must be the wiper motor Our products are usually delivered without installation connect and turn on the ignition so that the Engine is instructions. Installation may only be carried out by running in parking position. Then the must Drive lever can trained specialist technicians. Products supplied by us are be positioned on the wiper motor. Thereafter, the wiper arm exclusively intended for proper and appropriate use. The can be mounted. warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use.
For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules.
If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at:
Phone: 040 - 25 30 66 55 Email: [email protected]
This often avoids extensive troubleshooting that is disproportionate to normal repair times.
The following applies to complaints: The more complete the processes are submitted, the faster they can be processed.
Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Fitting Position: Front
- Voltage [V]: 12
- Left- / right-hand drive vehicles: for right-hand drive vehicles
- Item number: 0 390 241 331
- Our price: 166,33 €
- Manufacturer: BOSCH
- EAN number: 3165143178652
- Condition: New
price incl. 19% VAT
- Fitting Position: Rear Axle
- Diameter [mm]: 245
- Brake Disc Type: solid
- Construction Year from: 04 / 1992
- Brake Disc Thickness [mm]: 10
- Height [mm]: 64,2
- Surface: Coated
- Centering Diameter [mm]: 68
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 8
- Inner Diameter [mm]: 135,5
- Bore Diameter [mm]: 15,4
- Drilled: no
- Item number: C4A003ABE
- Manufacturer: ABE
- EAN number: 5900427204485
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 288
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 24,9
- Height [mm]: 46,5
- Surface: Oiled
- Centering Diameter [mm]: 68
- Number of Holes: 5
- Minimum thickness [mm]: 23
- Test Mark: E1 90R-02C0289 / 1675
- Drilled: no
- Item number: BG2745
- Manufacturer: DELPHI
- EAN number: 5012759426999
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year from: 04 / 1992
- Construction Year to: 06 / 1994
- Fitting Position: Rear Axle
- Braking / Drive Dynamics: for vehicles with ABS
- Diameter [mm]: 245
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 10
- Height [mm]: 64
- Centering Diameter [mm]: 68
- Minimum thickness [mm]: 8
- Drilled: no
- Item number: A1401P
- Manufacturer: LPR
- EAN number: 8032532068649
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 288
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 25
- Height [mm]: 46,2
- Centering Diameter [mm]: 68
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 23
- Drilled: no
- Item number: BDC5471
- Manufacturer: QUINTON HAZELL
- EAN number: 5050438069310
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year from: 04 / 1992
- Fitting Position: Rear Axle
- Brake System: Lucas / TRW
- Wear Warning Contact: excl. wear warning contact
- Thickness [mm]: 15,8
- Quantity Unit: Axle Set
- Height [mm]: 66,8
- Width [mm]: 87,6
- Test Mark: E1 90R-01075 / 075
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- MAPP code available
- Number of bolts / screws: 4
- Item number: 13.0460-3602.2
- Our price: 28,55 €
- Manufacturer: ATE
- EAN number: 4006633092661
- Condition: New
-
- Construction Year from: 04 / 1992
- Fitting Position: Front Axle
- Brake System: ATE
- Wear Warning Contact: incl. wear warning contact
- Thickness [mm]: 19,5
- Quantity Unit: Axle Set
- Height [mm]: 74,0
- Width [mm]: 156,3
- Test Mark: E9 90R-02A1259 / 1629
- Warning Contact Length [mm]: 202
- MAPP code available
- Spring Clip Diameter [mm]: 46
- Item number: 13.0460-7050.2
- Our price: 46,09 €
- Manufacturer: ATE
- EAN number: 4006633128056
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year from: 04 / 1992
- Fitting Position: Front Axle
- Diameter [mm]: 288
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 25,0
- Height [mm]: 46,5
- Surface: Coated
- Centering Diameter [mm]: 68,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112,0
- Minimum thickness [mm]: 23,0
- Inner Diameter [mm]: 135,0
- Machining: High-carbon
- MAPP code available
- No. of holes 2: 9
- Test Mark: E1 90R-02C0118 / 0064
- Bore Diameter [mm]: 15,4
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0125-0105.1
- Manufacturer: ATE
- EAN number: 4006633138987
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year from: 04 / 1992
- Fitting Position: Front Axle
- Diameter [mm]: 288
- Brake Disc Type: Vented
- Product line: PowerDisc
- Brake Disc Thickness [mm]: 25,0
- Height [mm]: 46,5
- Surface: Coated
- Centering Diameter [mm]: 68,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112,0
- Minimum thickness [mm]: 23,0
- Inner Diameter [mm]: 135,0
- Machining: High-carbon
- MAPP code available
- No. of holes 2: 9
- Bore Diameter [mm]: 15,4
- Drilled: no
- Item number: 24.0325-0105.1
- Manufacturer: ATE
- EAN number: 4006633276313
- Condition: New
For vehicles without ABS, a PowerDisc can be used on the rea r axle only if there is one on the front axle. The General Operating Permit (ABE) for the PowerDisc applies to operation on German roads in accordance with the German Road Traffic Registration Ordinance (StVZO). Other countries may require additional type approvals for use on roads.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 244,9
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 10
- Height [mm]: 63,9
- Surface: Oiled
- Centering Diameter [mm]: 68,1
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 8
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 15,4
- Drilled: no
- Item number: 0 986 478 132
- Manufacturer: BOSCH
- EAN number: 3165142134369
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Material: Low-Metallic
- Thickness [mm]: 15,1
- Quantity Unit: Axle Set
- Height [mm]: 66,8
- Width [mm]: 87
- WVA Number: 21144
- Test Mark: ECE-R90
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate, with mounting manual
- Article number of recommended accessories: 1987474106, 1987474939, 1987474253
- Observe technical data
- Item number: 0 986 494 059
- Our price: 18,07 €
- Manufacturer: BOSCH
- EAN number: 3165143768020
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 288
- Brake Disc Type: Vented
- Construction Year from: 04 / 1992
- Brake Disc Thickness [mm]: 25,0
- Height [mm]: 46,5
- Surface: Coated
- Centering Diameter [mm]: 68
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 23
- Inner Diameter [mm]: 135
- Machining: High-carbon
- No. of holes 2: 9
- Bore Diameter [mm]: 15,4
- Drilled: no
- Item number: C3W018ABE
- Manufacturer: ABE
- EAN number: 5900427201798
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 245
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 9,9
- Height [mm]: 64
- Surface: Oiled
- Centering Diameter [mm]: 68
- Number of Holes: 5
- Minimum thickness [mm]: 8
- Test Mark: E1 90R-02C0100 / 1592
- Drilled: no
- Item number: BG2746
- Manufacturer: DELPHI
- EAN number: 5012759427002
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year from: 08 / 1992
- Construction Year to: 06 / 1994
- Fitting Position: Front Axle
- Diameter [mm]: 288
- Brake Disc Type: internally vented
- Brake Disc Thickness [mm]: 25
- Height [mm]: 46
- Centering Diameter [mm]: 68
- Number of Holes: 5
- Minimum thickness [mm]: 23
- Drilled: no
- Item number: A1371V
- Manufacturer: LPR
- EAN number: 8032532068618
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 245
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 10
- Height [mm]: 64
- Centering Diameter [mm]: 68
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 8
- Drilled: no
- Item number: BDC3929
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593295193
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year from: 04 / 1992
- Fitting Position: Rear Axle
- Diameter [mm]: 245,0
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 10,0
- Height [mm]: 64,2
- Surface: Coated
- Centering Diameter [mm]: 68,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112,0
- Minimum thickness [mm]: 8,0
- Inner Diameter [mm]: 135,5
- MAPP code available
- Test Mark: E1 90R-02C0165 / 1152
- Bore Diameter [mm]: 15,4
- Drilled: no
- Item number: 24.0110-0201.1
- Manufacturer: ATE
- EAN number: 4006633133609
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year from: 04 / 1992
- Fitting Position: Rear Axle
- Diameter [mm]: 245,0
- Brake Disc Type: solid
- Product line: PowerDisc
- Brake Disc Thickness [mm]: 10,0
- Height [mm]: 64,2
- Surface: Coated
- Centering Diameter [mm]: 68,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112,0
- Minimum thickness [mm]: 8,0
- Inner Diameter [mm]: 135,5
- MAPP code available
- Test Mark: E1 90R-02C0859 / 1217
- Bore Diameter [mm]: 15,4
- Drilled: no
- Item number: 24.0310-0201.1
- Manufacturer: ATE
- EAN number: 4006633146661
- Condition: New
For vehicles without ABS, a PowerDisc can be used on the rea r axle only if there is one on the front axle. The General Operating Permit (ABE) for the PowerDisc applies to operation on German roads in accordance with the German Road Traffic Registration Ordinance (StVZO). Other countries may require additional type approvals for use on roads.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Brake System: ATE
- Wear Warning Contact: with integrated wear sensor
- Material: Low-Metallic
- Thickness [mm]: 20,4
- Quantity Unit: Axle Set
- Height 1 [mm]: 74,2
- Height 2 [mm]: 74,4
- Width 2 [mm]: 156,5
- Width 1 [mm]: 156,4
- WVA Number: 20676
- Test Mark: ECE-R90
- Supplementary Article / Supplementary Info Info 2: with piston clip, with anti-squeak plate
- Article number of recommended accessories: 1987474938, 1987474175
- Observe technical data
- Item number: 0 986 460 937
- Our price: 32,27 €
- Manufacturer: BOSCH
- EAN number: 3165143210208
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 288
- Brake Disc Type: Vented, internally vented
- Brake Disc Thickness [mm]: 25
- Height [mm]: 46,4
- Surface: Coated
- Centering Diameter [mm]: 68
- Number of Holes: 9
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 23
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 15,4
- Drilled: no
- Item number: 0 986 478 546
- Manufacturer: BOSCH
- EAN number: 4047024199965
- Condition: New
price incl. 19% VAT
excl. delivery costs