Audi A5 B8 Sportback 3.0 TDI quattro Crankcase breather (240 hp Diesel CCWA)
- Fitting Position: Front Axle
- for OE number: 059103495G
- Assy. / disassy. by qualified personnel required!
- Component Number: 053-028-108
- Item number: 053-028-108
- Our price: 27,87 €
- Manufacturer: ABAKUS
- EAN number: 224657167138981671389
- Condition: New
The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale.
Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops.
Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list).
Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system.
Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.
- TecDoc Engine Number: CAPA
- Item number: V10-6490
- Our price: 108,04 €
- Manufacturer: VAICO
- EAN number: 4046001908064
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Item number: P129083
- Our price: 33,37 €
- Manufacturer: PREXAparts
- EAN number: 4251162219427
- Condition: New

- Fitting Position: Upper
- Valve type: Breather Valve
- Housing Type: Synthetic Material Housing
- Housing material: GRP (Glass fibre Reinforced Plastic)
- Operating Mode: Pressure Controlled
- Supplementary Article / Supplementary Info: with gaskets / seals
- Item number: LTD-059103495G
- Our price: 33,93 €
- Manufacturer: LTD
- EAN number: 5906125240053
- Condition: New

- Item number: 53378
- Our price: 34,13 €
- Manufacturer: OSSCA
- EAN number: 6915093533783
- Condition: New
- for OE number: 059 103 495 G
- Item number: 07.10.110
- Our price: 34,98 €
- Manufacturer: TRUCKTEC AUTOMOTIVE
- EAN number: 4038081136284
- Condition: New
- Housing material: GRP (Glass fibre Reinforced Plastic)
- Supplementary Article / Supplementary Info: with gaskets / seals, with gasket / seal
- Valve type: Breather Valve
- Operating Mode: Pressure Controlled
- Fitting Position: Upper, Cylinder Head
- Housing Type: Synthetic Material Housing
- Observe the vehicle manufacturer specifications
- Width [mm]: 135
- Height [mm]: 100
- Recommended change interval [years]: 3
- Weight [kg]: 0,2099
- Packaging width [cm]: 12
- Packaging height [cm]: 13,2
- Packaging Depth [cm]: 13
- Item number: 18-1285
- Our price: 35,09 €
- Manufacturer: MAXGEAR
- EAN number: 5903364359706
- Condition: New
- Fitting Position: Upper
- Valve type: Breather Valve
- Housing Type: Synthetic Material Housing
- Housing material: GRP (Glass fibre Reinforced Plastic)
- Operating Mode: Pressure Controlled
- Supplementary Article / Supplementary Info: with gaskets / seals
- Item number: 116 430
- Our price: 37,29 €
- Manufacturer: TOPRAN
- EAN number: 1207220000011
- Condition: New
Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
price incl. 19% VAT
excl. delivery costs
- TecDoc Engine Number: CCWA
- Length [mm]: 88
- Observe service information
- Housing material: Polyamid 6.6
- Seal Material: FPM (fluoride rubber) / ACM (polyacrylate rubber)
- Observe technical data
- Recommended change interval [km]: 60000
- Observe the vehicle manufacturer specifications
- Fitting Position: Cylinder Head
- Supplementary Article / Supplementary Info: with gasket / seal
- Width [mm]: 135,0
- Height [mm]: 100
- Operating Mode: Pressure Controlled
- Valve type: Breather Valve
- Recommended change interval [years]: 3
- Weight [kg]: 0,2099
- Supplementary Info: Original VAICO Quality
- Packaging width [cm]: 12
- Packaging height [cm]: 13,2
- Packaging Depth [cm]: 13
- Item number: V10-2597
- Our price: 39,83 €
- Manufacturer: VAICO
- EAN number: 4046001586804
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Cylinder Head
- Operating Mode: Pressure Controlled
- Valve type: Breather Valve
- Weight [kg]: 0,21
- Always compare old and new part (in particular OE No.)
- Item number: 31SKV017
- Our price: 41,11 €
- Manufacturer: ESEN SKV
- EAN number: 5901947345085
- Condition: New
- TecDoc Engine Number: CCWA
- Fitting Position: Upper
- Supplementary Article / Supplementary Info: with gasket / seal
- Item number: 2385059
- Our price: 47,28 €
- Manufacturer: METZGER
- EAN number: 4062101041890
- Condition: New
- Weight [kg]: 0,149
- Item number: 175969
- Our price: 49,12 €
- Manufacturer: FEBI BILSTEIN
- EAN number: 4054224759691
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs

- Housing material: PA 66 GF 30
- Width [mm]: 100
- Height [mm]: 80
- Weight [kg]: 0,4
- Item number: A1216105
- Our price: 50,79 €
- Manufacturer: BOGAP
- EAN number: 4251789105479
- Condition: New
- Weight [kg]: 0,149
- Item number: 33 10 3216
- Our price: 80,86 €
- Manufacturer: SWAG
- EAN number: 4054228759697
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- for OE number: 059103495G
- Item number: 91631
- Our price: 90,89 €
- Manufacturer: MEAT & DORIA
- EAN number: 808888903844
- Condition: New

- Supplementary Article / Supplementary Info: with gaskets / seals
- Seal Material: HNBR (hydrogenated nitrile butadiene rubber)
- Housing material: PA 66-GF 25
- Weight [kg]: 0,88
- Item number: A1216136
- Our price: 95,50 €
- Manufacturer: BOGAP
- EAN number: 225349235722842357228
- Condition: New
- Production date from: 18.07.2016
- Observe service information
- Fitting Position: Engine Block
- Item number: V10-5795
- Our price: 110,37 €
- Manufacturer: VAICO
- EAN number: 4062375202997
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fabrication Number: EPCV-VW-013
- Item number: EPCV-VW-013
- Our price: 38,26 €
- Manufacturer: NTY
- EAN number: 5902048187321
- Condition: New

- Weight [g]: 150
- Fitting Position: Front Axle
- Supplementary Article / Supplementary Info: with temperature sensor
- Item number: 80386
- Our price: 65,54 €
- Manufacturer: BIRTH
- EAN number: 1000001267224
- Condition: New
- Fabrication Number: SEP-AU-000
- Item number: SEP-AU-000
- Our price: 24,70 €
- Manufacturer: NTY
- EAN number: 5902048202710
- Condition: New
- 1
- 2